Second Convertible Tine Latch WP99002689

Upper dish rack with dish / glass fold away tine has two broken latches, this situation is causing instability. Went to partselect for schematic and found what looked like the necessary replacement latch/s on print and ordered all latches. Received parts only to find they were the wrong ones. Evidently they are the parts for the bottom dish / glass fold away tine. Removed upper tine and still looking for the actual replacement parts on the schematic with no luck.

Very simple replacement of snap-in parts. The key was in finding those parts and PartSelect made that easy.

The adjustable racks were no longer staying place, Replaced 2 items, now the rack stays in place, 5 minutes, with no tools required. Maytag did not do a very good job designing the racks

For the door Handle this is the second time I replaced the handle. 6-8 screws using a drill had the handle exposed in no time. Removing the wiring from the switches is the toughest as the connectors grip the switch very well, a good pull is all that is needed.

Was done with minimal effort and time. Make sure to turn off the power first as it is easy to touch the contacts on the switches when removing the handle