Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
TOM D - November 18, 2020
Verified Purchase
Perfect replacement part!
The motorized oven latch was an exact fit. Installed it and it works great.
TD
★★★★★
★★★★★
Rose Marie G - April 11, 2019
Verified Purchase
worked as expected
it was the correct part and it went in easily.
★★★★★
★★★★★
Michaelee G - June 12, 2018
Verified Purchase
Latch
Excellent part and service. Installed it with no problems and stove is working like new.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nelson
February 23, 2018
I tried to pull the oven away from wall using door. Left side popped out so i removed door entirely. Reinstalled per directions on youtube howver didnt notice that the latch had moved to a psotion that doesnt allow the door to completely close any more. Now the oven wont turn.
For model number xu1611880
Hello Nelson, Thank you for your inquiry. That can be caused by a faulty latch, or if the door is not closing completely-in that case you would have to move the latch back into the correct position. Although we do not have a repair video for this exact part number, I have included a link for a video for a similar latch to show you how to replace it/put it back into place. Hope this helps!
https://www.youtube.com/watch?v=FYY0to6arVk&index=118&list=PLDDA8228D5AC1E937&t=0s
2 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
December 27, 2022
Microwave will not start. set cooking time on panel, it works, press start and panel screen reads "Door" and will not start. Latches on both sides fully engage when door is closed. Thank you in advance for any insight you can provide.
For model number GMC275PRB01
Hello Chris, thank you for contacting us. The most probable cause of the issue is a faulty door switch, part number PS10057152. A defective door switch can prevent the microwave from working when the door is closed. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
The oven light will not go off and the oven will not stay on. Any suggestions?
For model number KSGA906PSS02
Hello Joe, thank you for contacting us. You will want to consider replacing either the Spark Module part number PS11753037 or the Temperature Sensor part number PS11748765 for your model. I hope this helps and good luck with your repair!
Was this helpful?
Thank you for voting!
Lena
July 31, 2017
My oven door will not latch. Repair man said I need a new latch. He said he would order the latch and that it would be here July 2 and would cost about $140? It has been 3 months since he said he ordered it. Can you help me? Repairman said latch is bent. Lena
For model number KdSS907SSS02
Hi Lena,
Thank you for contacting us. We do have the latch in stock. We can have this shipped and on its way today. If you wish to place an order please do not hesitate to give us a call.
Hope this helps!
Was this helpful?
Thank you for voting!
Stephen
September 26, 2017
Oven door is locking even in preheat have to turn off and after a few minutes it will unlock door
For model number RBS245PRB06
Hi Stephen,
Thank you for your question. I would suggest checking your latch first. You can test that with a multimeter. If that part is fine, it may be your electronic control board that is the issue. Good luck with your repair.
Was this helpful?
Thank you for voting!
Dennis
February 8, 2023
If this part is bad will they've not work?
Also, is it difficult to replace?
For model number Kdrp707rss01
Hi Dennis, thank you for reaching out. If the motorized latch is bad, it will no longer be able to keep the oven door locked and secured when closed. This is an easy replacement, like a DIY project. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Kevin
May 10, 2023
I took the lower oven door off to disassemble and clean it, now the lower oven latch won't rotate to the right to allow the door to completely shut. Please help
For model number RBD277PVQ00
Hello Kevin, thank you for the query. According to our research, you may need to replace the latch, part number PS11747306, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Peter
July 4, 2023
Hello,
After a power outage wall oven RBD305PRS00 door did not open . I had to manually open the door by sliding the latch using a Screwdriver.
However, now the door shows as open and light stays on. I’ve tried to reset the Oven, Autoclean/cancel but the door remains in open position.
Seems that the latch does no longer engage, even in Autoclean setting.
I’m not sure if the issue is with the latch Control Board WP8301848, or the latch motorized assembly WP9760889. I suspect a power surge has caused some damage….
Please advise.
For model number RBD305PRS00
Hello Peter, thank you for contacting us. We would suggest checking the door latch assembly, part number PS11747306, first. It locks the door during cycles and sends information to the latch control board. You may test the door latch assembly for continuity using a multimeter. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
