Quick Question!

Have you ever purchased from PartSelect.com before?

11747252-1-S-Whirlpool-WP9759474-Inifinite Switch
11747252-1-S-Whirlpool-WP9759474-Inifinite Switch 11747252-2-S-Whirlpool-WP9759474-Inifinite Switch 11747252-3-S-Whirlpool-WP9759474-Inifinite Switch https://partselectcom.azureedge.net/Schematics/Whirlpool/YVV3JQWG.gif

Inifinite Switch

Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11747252
Manufacturer Part Number WP9759474
Manufactured by Whirlpool

This switch is used for the right rear and left front burner.

This part works with the following brands: Whirlpool.

This part works with the following products: Cooktop.

This part fixes the following symptoms:

  • Element will not heat.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful


My left front large burner will only heat on high heat on the normal setting. The simmer setting still works. Will i need to replace the switch? If so, what is the part number for the switch? My serial number to the unit is xr0402045.

Bill for model number GJC3634LQ01

Hi Bill, Thank you for your inquiry. The part number for the switch you need is PS11747252. I hope this helps. Thank you and have a great day!

Most Recent


How do you test a dual element to see if its bad.

Sam for model number GJC3034LB01

Hi Sam, Thank you for your question. You can often determine whether or not a radiant element is burned out by physically inspecting the burner. Most times you will see that part of the element is burned out and then you will know that your element is the part not working. However you can also test your element with a multi-meter. When using a multi-meter, make sure to turn to the lowest setting of OHMS of resistance. The calibrate your needle so that it falls on 0. To test the element you use the probes of your multi-meter to touch the probes of your element directly. If the meter does not move that means that your element is non functional and you will have to replace it. I hope this helps!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.3 / 5.0, 3 reviews What's this?
1-3 of 3

22 of 30 people found this instruction helpful

Parts Used:
  • Inifinite Switch
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Barry from Wichita Falls, TX

A heat control switch was broken.

I first turned off the power to the stovetop at the breaker box, disconnected the power supply wires, removed the stovetop from the counter, placed the stovetop on a towel on the kitchen table, removed the screws connecting the glass top to the base, removed the glass top, removed additional screws holding the sheetmetal housing for the switches, opened this area and located the faulty switch, disconnected the wires leading to the faulty switch, connected the wires to the new switch, secured the switch to the sheetmetal housing and put the unit back together. It was not a difficult repair, just took a little time.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 5 people found this instruction helpful

Parts Used:
  • Inifinite Switch
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: DAVID from GENESEE, ID

Left front inside burner full-hot only

First I turned off the power at the circuit-breaker. Next, I disconnected the wires to the cooktop pigtail in the junction box. I lifted the cooktop from the countertop by pushing up from under the countertop. I raised it up enough to slip some wood slats in to hold it up. I finally was able to support the unit on two two-by-fours which bridged the opening in the countertop. It is important to keep the unit topside up. The screws which hold the top in place all go in from the outside all around the perimeter of the top. Once the screws are out and the knobs pulled off, the glass top can be lifted off from the metal assembly which holds the controls. An ell-shaped sheet metal guard must be removed first. Then all of the screws must be removed from the control box. Raise the control box, remove one connector at a time from the defective switch and connect each to the same terminal on the replacement. Remove the two screws that hold the defective switch. Remove the defective switch and replace it with the new one. Then put everything back together and reconnect the wiring. Turn power on at the circuit breaker and it should work fine. Do not pry against the glass top when separating it. You can pry gently between the metal parts. Be sure all of the screws are out first.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 16 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Screw drivers
Customer: David from Austin, TX

Cracked cooktop, faulty control

About three months ago, the glass surface cooktop started to develop cracks similar to what happens to a car windshield. About a month ago, the cracks turned into fault lines, making the glass surfaces unlevel and rendering the burner unusable. Also, the lower left burner dual control would not go to simmer after being on high. No information could be obtained about how to access the cooktop. I placed a service call to a local appliance repairer. For a service call fee of $54, he instructed me on how to pull the oven to access the cooktop, and quoted a price of about $725 to replace the glass surface and defective control. For about $350 in parts and about 3 hours labor, I replaced the glass and control, and banished a terrible buzzing noise the oven was making during preheat and baking.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11747252
Manufacturer Part Number: WP9759474
Brand Model Number Description
Whirlpool8286614Cooktop - COUNTER UNIT
WhirlpoolGJC3034LB0Cooktop - Electric Counter Unit
WhirlpoolGJC3034LB01Cooktop - Electric Counter Unit
WhirlpoolGJC3034LB02Cooktop - Built-in, 30", Electric
WhirlpoolGJC3034LC01Cooktop - Electric Counter Unit
WhirlpoolGJC3034LC02Cooktop - Built-in, 30", Electric
WhirlpoolGJC3034LCOCooktop - Electric Counter Unit
WhirlpoolGJC3034LP0Cooktop - Electric Counter Unit
WhirlpoolGJC3034LP01Cooktop - Electric Counter Unit
WhirlpoolGJC3034LP02Cooktop - Built-in, 30", Electric
WhirlpoolGJC3034LQ0Cooktop - Electric Counter Unit
WhirlpoolGJC3034LQ01Cooktop - Electric Counter Unit
WhirlpoolGJC3034LQ02Cooktop - Built-in, 30", Electric
WhirlpoolGJC3034LT0Cooktop - Electric Counter Unit
WhirlpoolGJC3034LT01Cooktop - Electric Counter Unit
WhirlpoolGJC3034LT02Cooktop - Built-in, 30", Electric
WhirlpoolGJC3034RB00Cooktop - Electric
WhirlpoolGJC3034RB01Cooktop - Electric Counter Unit
WhirlpoolGJC3034RB02Cooktop - Electric, Counter Unit
WhirlpoolGJC3034RB03Cooktop - Electric, Counter Unit
WhirlpoolGJC3034RB04Cooktop - Electric, Counter Unit
WhirlpoolGJC3034RB05Cooktop - Electric, Counter Unit
WhirlpoolGJC3034RB06Cooktop - Electric 30", Built-in, Ceran
WhirlpoolGJC3034RC00Cooktop - Electric
WhirlpoolGJC3034RC01Cooktop - Electric Counter Unit
WhirlpoolGJC3034RC02Cooktop - Electric, Counter Unit
WhirlpoolGJC3034RC03Cooktop - Electric, Counter Unit
WhirlpoolGJC3034RC04Cooktop - Electric, Counter Unit
WhirlpoolGJC3034RC05Cooktop - Electric, Counter Unit
WhirlpoolGJC3034RP00Cooktop - Electric