Part Location Diagram of WP9759474 Whirlpool Inifinite Switch
See part 7 in the diagram
Replacing your Whirlpool Cooktop Inifinite Switch
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Inifinite Switch WP9759474

★★★★★
★★★★★
5 Reviews

Rated by 4 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 93.90
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11747252
Manufacturer Part Number WP9759474
Manufactured by Whirlpool
Product Description

Inifinite Switch Specifications

This switch is used for the right rear and left front burner.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Cooktop Inifinite Switch

Replacing your Whirlpool Cooktop Inifinite Switch
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Cooktop.
This part works with the following products:
Whirlpool.
Part# WP9759474 replaces these:
4456460, 9759474
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
5.0
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 2.6 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
left front burner only on high temp
Remove 8 screws from perimeter of the cooktop lower frame. Glass lifts out (note it is heavy). Remove screws around control section to lift up the controllers. Disconnect wires from non-functioning module. Note you will need pliers to pull them off. I pulled off one at a time and connected the wire to the new module so that I did not rewire incorrectly. Remove screws holding the old module and insert the new module. Replace all screws and glass top.

Very easy fix.
  • richard from SAN ANTONIO, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left Front inside burner full-hot only
First I turned off the power at the circuit-breaker. Next, I disconnected the wires to the cooktop pigtail in the junction box. I lifted the cooktop from the countertop by pushing up from under the countertop. I raised it up enough to slip some wood slats in to hold it up. I finally was able to support the unit on two two-by-fours which bridged the opening in the countertop. It is important to keep the unit topside up. The screws which hold the top in place all go in from the outside all around the perimeter of the top. Once the screws are out and the knobs pulled off, the glass top can be lifted off from the metal assembly which holds the controls. An ell-shaped sheet metal guard must be removed first. Then all of the screws must be removed from the control box. Raise the control box, remove one connector at a time from the defective switch and connect each to the same terminal on the replacement. Remove the two screws that hold the defective switch. Remove the defective switch and replace it with the new one. Then put everything back together and reconnect the wiring. Turn power on at the circuit breaker and it should work fine. Do not pry against the glass top when separating it. You can pry gently between the metal parts. Be sure all of the screws are out first.
  • DAVID from GENESEE, ID
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked cooktop, faulty control
About three months ago, the glass surface cooktop started to develop cracks similar to what happens to a car windshield. About a month ago, the cracks turned into fault lines, making the glass surfaces unlevel and rendering the burner unusable. Also, the lower left burner dual control would not go to simmer after being on high. No information could be obtained about how to access the cooktop. I placed a service call to a local appliance repairer. For a service call fee of $54, he instructed me on how to pull the oven to access the cooktop, and quoted a price of about $725 to replace the glass surface and defective control. For about $350 in parts and about 3 hours labor, I replaced the glass and control, and banished a terrible buzzing noise the oven was making during preheat and baking.
Other Parts Used:
Main Cooktop - Black Inifinite Switch
  • David from Austin, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
8 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A heat control switch was broken.
I first turned off the power to the stovetop at the breaker box, disconnected the power supply wires, removed the stovetop from the counter, placed the stovetop on a towel on the kitchen table, removed the screws connecting the glass top to the base, removed the glass top, removed additional screws holding the sheetmetal housing for the switches, opened this area and located the faulty switch, disconnected the wires leading to the faulty switch, connected the wires to the new switch, secured the switch to the sheetmetal housing and put the unit back together. It was not a difficult repair, just took a little time.
  • Barry from Wichita Falls, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
24 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

7 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
October 4, 2017
My left front large burner will only heat on high heat on the normal setting. The simmer setting still works. Will i need to replace the switch? If so, what is the part number for the switch? My serial number to the unit is xr0402045.
For model number GJC3634LQ01
PartSelect logo
Hi Bill, Thank you for your inquiry. The part number for the switch you need is PS11747252. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
James
September 30, 2019
Right front element does not work. Is part # 11740893 the right element switch?
For model number GJC3034LP0
PartSelect logo
Hello James, thank you for your question. The Right Front element is PartSelect Number PS11740892. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
JAMES
January 28, 2020
My left front dual element would only work in the high setting no matter where you put the controls. The same for the single element. They came on but was in the high setting no matter where you move the control. After looking a the back of the control switch, i ordered the same switch (wp9759474). I was careful to move only one wire at the time, because the new switch wasn't labeled. I matched the switches to make sure i had it turned correctly. Now i can control the element settings, but i no longer have the dual element, only the inter element. I guess the outer element isn't connected. I am trying to find a wiring diagram that will show me what color wire goes where. The wiring diagram is visible under the cool top but doesn't show wire colors.
For model number GJD3044RB01
PartSelect logo
Hello and thank you for writing. Before you do that you might want to test the element for continuity with a multimeter as this could be the issue. If that does not solve the issue let us know and we will do the research for you to find you the correct colors for your wire hook up. We hope this helps. Please contact us anytime if you require further assistance.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Normajean
June 29, 2021
The front left burner on my Whirlpool Gold countertop range has a bridge element. One half of the switch controls the burner only and the other half controls the bridge with the burner. It will turn one or both on but only on the highest setting. Is part number PS11747252 the correct switch?
For model number GJC3634RB01
PartSelect logo
Hi Normajean, Thank you for your question. Yes, this would be the correct infinite switch for the front left burner. We hope this helps! Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Steve
January 8, 2019
Is this the switch for the largest dual burner. My switch is split in half by function. One half operates the smaller inner burner the other half controls the inner and outer together. In my situation in the dual mode the switch intermittently controls at the highest setting which is the setting that has been used 90% of the time. Playing with switch for now gets the high setting active. I fear a failure is eminent and possibly presents a fire hazard.
For model number GJD3044RB02
PartSelect logo
Hello Steve, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11747252. Hope this helps, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Robert
June 12, 2019
Hi steve: I looked up the rt. Rear burner switch for my Whirlpool cook top and came up with # ps1174725. My question is does this switch have the standard two flat side with clip shaft or is it the small square shaft with adapters?
For model number GJC3054RP00
PartSelect logo
Hello Robert, thank you for your question. The dual element switch for that unit is part number PS11747252. This part has the small square shaft and adapters. It is the authorized replacement part for your unit. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Sam
August 3, 2017
How do you test a dual element to see if its bad.
For model number GJC3034LB01
PartSelect logo
Hi Sam, Thank you for your question. You can often determine whether or not a radiant element is burned out by physically inspecting the burner. Most times you will see that part of the element is burned out and then you will know that your element is the part not working. However you can also test your element with a multi-meter. When using a multi-meter, make sure to turn to the lowest setting of OHMS of resistance. The calibrate your needle so that it falls on 0. To test the element you use the probes of your multi-meter to touch the probes of your element directly. If the meter does not move that means that your element is non functional and you will have to replace it. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747252
Manufacturer Part Number: WP9759474
Brand
Model Number
Description
Whirlpool
8286614
Cooktop - COUNTER UNIT
Whirlpool
GJC3034LB0
Cooktop - Electric Counter Unit
Whirlpool
GJC3034LB01
Cooktop - Electric Counter Unit
Whirlpool
GJC3034LB02
Cooktop - Built-in, 30", Electric
Whirlpool
GJC3034LC01
Cooktop - Electric Counter Unit
Whirlpool
GJC3034LC02
Cooktop - Built-in, 30", Electric
Whirlpool
GJC3034LCO
Cooktop - Electric Counter Unit
Whirlpool
GJC3034LP0
Cooktop - Electric Counter Unit
Whirlpool
GJC3034LP01
Cooktop - Electric Counter Unit
Whirlpool
GJC3034LP02
Cooktop - Built-in, 30", Electric
Whirlpool
GJC3034LQ0
Cooktop - Electric Counter Unit
Whirlpool
GJC3034LQ01
Cooktop - Electric Counter Unit
Whirlpool
GJC3034LQ02
Cooktop - Built-in, 30", Electric
Whirlpool
GJC3034LT0
Cooktop - Electric Counter Unit
Whirlpool
GJC3034LT01
Cooktop - Electric Counter Unit
Whirlpool
GJC3034LT02
Cooktop - Built-in, 30", Electric
Whirlpool
GJC3034RB00
Cooktop - Electric
Whirlpool
GJC3034RB01
Cooktop - Electric Counter Unit
Whirlpool
GJC3034RB02
Cooktop - Electric, Counter Unit
Whirlpool
GJC3034RB03
Cooktop - Electric, Counter Unit
Whirlpool
GJC3034RB04
Cooktop - Electric, Counter Unit
Whirlpool
GJC3034RB05
Cooktop - Electric, Counter Unit
Whirlpool
GJC3034RB06
Cooktop - Electric 30", Built-in, Ceran
Whirlpool
GJC3034RC00
Cooktop - Electric
Whirlpool
GJC3034RC01
Cooktop - Electric Counter Unit
Whirlpool
GJC3034RC02
Cooktop - Electric, Counter Unit
Whirlpool
GJC3034RC03
Cooktop - Electric, Counter Unit
Whirlpool
GJC3034RC04
Cooktop - Electric, Counter Unit
Whirlpool
GJC3034RC05
Cooktop - Electric, Counter Unit
Whirlpool
GJC3034RP00
Cooktop - Electric
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service