Part Location Diagram of WP9752759 Whirlpool Relay
See part 23 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Relay WP9752759

 Fits your KEBS207SSS04!
$ 97.29
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your KEBS207SSS04!
PartSelect Number PS11747133
Manufacturer Part Number WP9752759
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Microwave Oven Combo, Wall Oven, Range, Microwave.
This part works with the following products:
KitchenAid, Kenmore, Jenn-Air, Whirlpool.
Part# WP9752759 replaces these:
9752759
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carlos
December 26, 2017
How to test relay part # wp9752759
For model number kebs109bss01
PartSelect logo
Hello Carlos, Thank you for your inquiry. You can test it with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

Was this helpful?
Thank you for voting!
Gary
December 30, 2019
On our combo unit, the microwave works fine but when using the main oven, it will heat-up to the desired temp then begin to lose heat. The display continues to show the correct temperature but after about fifteen minutes, if the oven is quickly restarted, it will then display the current correct temp which will have dropped precipitously (about 55 degrees in fifteen minutes). In other words, if i am baking cookies at 350, the oven preheats normally and everything appears good. I slide the cookies into the oven and the display continues to read 350. After about fifteen minutes, if i push the bake button, the display will change to the actual temperature (about 295) and i have to cancel the bake and completely start over again to re-reach the desired temperature. I have already replaced the temp control and the thermo fix but to no avail. My next purchase is the controller (ps11752703), at $400.00. Does this sound to you like it will solve my problem?
For model number kems379bss00
PartSelect logo
Hello Gary and thank you for writing. So to summarize you changed the terminal block PS11750972 and the temperature sensor PS11744233. The next step would be to test the oven elements Broil PS11722938 & Bake PS11756151 & PS8746411 for continuity before even thinking about the controller. We hope this helps. Please contact us anytime if you require further assistance.

Was this helpful?
Thank you for voting!
Related Parts:
Gary
January 2, 2020
Your last response did not fulfill its intended purpose. As i stated in the first sentence of my last question, the oven works like normal in the preheat mode; meaning, the bake and broil elements work just dandy! It is at this point, however, the oven begins to lose heat and has to be restarted in order that it re-attain the desired temperature, this despite the fact the control continues to display the set temp and not the actual temp. I was told by another company that my thermostat must be bad, and they sold me an expensive temperature control probe. That did not solve the problem (i did not think it would as the oven does seem aware of its temperature, despite not being able to maintain it). I also replaced the thermo fix module based solely on the part description, and that did not work. So what's next? I figure it has to be the control board, right? Please advise.
For model number kems379bss00
PartSelect logo
Hi Gary, thank you for your question. Yes, if you have changed out or tested all of the relevant parts and they are all working normally, then the issue would be in your electronic control board. Good luck with your repair.

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747133
Manufacturer Part Number: WP9752759
Brand
Model Number
Description
Kenmore
66572022100
Range
Kenmore
66572022101
Range
Kenmore
66572022102
Range
Kenmore
66572023100
Range
Kenmore
66572023102
Range
Kenmore
66572024100
Range
Kenmore
66572024102
Range
Kenmore
66572029100
Range
Kenmore
66572029102
Range
Kenmore
66575022100
Range
Kenmore
66575022101
Range
Kenmore
66575022102
Range
Kenmore
66575023100
Range
Kenmore
66575023102
Range
Kenmore
66575024100
Range
Kenmore
66575024102
Range
Kenmore
66575029100
Range
Kenmore
66575029102
Range
Kenmore
66575032200
Range
Kenmore
66575033200
Range
Kenmore
66575034200
Range
Kenmore
66575039200
Range
Kenmore
66575832001
Range
Kenmore
66575832002
Range
Kenmore
66575832003
Range
Kenmore
66575834001
Range
Kenmore
66575834002
Range
Kenmore
66575834003
Range
Kenmore
66575839001
Range
Kenmore
66575839002
Range
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service