Quick Question!

Have you ever purchased from PartSelect.com before?

11747089-1-S-Whirlpool-WP9743903-Door Handle
11747089-1-S-Whirlpool-WP9743903-Door Handle 11747089-2-S-Whirlpool-WP9743903-Door Handle 11747089-3-S-Whirlpool-WP9743903-Door Handle https://www.partselect.com/Schematics/Whirlpool/E58AUIOZ.gif

Door Handle

Your Price

$38.09
Order within the next 6 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11747089
Manufacturer Part Number WP9743903
Manufactured by Whirlpool

This is a door handle used for dishwashers, located on the front panel of the dishwasher. *Please Note: The handle is now only available in black and is sold separately. If your door handle will not close, open, start, or there is a door latch failure, then it is best to replace it to solve the issues mentioned above. For installation instructions and accurate guidance, refer to the manual provided by the manufacturer. As a safety precaution, remember to unplug your appliance from the power source.

This part works with the following brands: KitchenAid.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Door latch failure.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.1 / 5.0, 9 reviews What's this?
1-9 of 9
 

26 of 37 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Vincent from Ruskin, FL

Door handle broke and could not open the dishwasher

Managed to open the dishwasher without breaking anything else! 1ST TURN OFF THE POWER SUPPLY AT THE BREAKER BOX,SAFETY IS PARAMOUNT! Took the kick plate off at the bottom, unscrewed the bottom of the front panel and removed the interior door screws. Removed top panel with the circuit board attached, be very careful doing this as you can destroy the circuit board if it cracks or bends.Unplug it and set it aside. remove the broken door handle and insert the new one with the simple metal and spring mechanism. put it all together in reverse order. DO NOT OVER TIGHTEN ANY OF THE SCREWS OR YOU CAN STRIP THEM AND HAVE MORE PROBLEMS! I have to say I was surprised how quickly the part arrived during some of the worst weather conditions up north. Very pleased!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

19 of 31 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Francis from Fletcher, NC

Release handle broke with door in latched closed position

Normal handle replacemnt would have been by removeing the screws on the inside panel to release the front panel and permit access to the handle location.

The door being latched closed required aceesing from the exterior by removing all of the outer screws and outide panel, removing all of the interior components and then reaching the latch from outside. A most difficult process. Some other plastic clips were broken in this process.

Once the door latch was released, normal acces was easily gained and replacing the handle was relatively easy. After everything was reinstalled, the top outside pane was loose because the broken clips no longer held the panel in place. A self tapping screw, although visable but not too noticeable, holds the panel secure.

The unit is over 11 years old and plastic is not very durable. The handle was subject to being broken by normal everyday useage. A metal part would have been much better a design for this item.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 14 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Anthony from Boca Raton, FL

Plastic handle to unlock door broke

Took 6 screws off to disassemble the control panel, removed the electonics, removed and ordered handle, and replaced it.

Smooth.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 10 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Paul from Ashburn, VA

Plastic handle broke

Removed inside cover and inserted new handle on two tabs and attached latch. Slightly tricky to get 3 pieces in place and reattach cover without them moving.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jonathan from Canton, GA

Dishwasher not cleaning well. Latch not opening easily.

Uncscrewed the lower washer arm retaining nut and replaced it along wint the 2 washers. Cleans like new.

Unscrewed the front panal from behind. Removed the inside vent covering. Unscrewed the handle screws and removed the handle. Replaced the handle and screws but not before gouging the back of my hand ( I had a needle and thread) and then reattached the panal and vent cavering. The blow-up diagrams you all have are a great reference. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Joe from MIDDLETOWN, NJ

Broken door handle opener

The repair itself want too tough. Use Torx screwdrivers to take screws from inside of door seams, turn inner dryer screen 45 degrees to take off, pry open stainless steel inner door from outer door. Take out old handle, clip in new handle and reverse process. There was no need to disconnect circuit board wiring due to slack in wires. One cautionary note, stainless steel inner door housing is EXTREMELY sharp, sliced 3 fingers while removing/installing inner door.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: doug from south bend, IN

Door handle and control panel broken

remove the top 4 screws, tilt out, pull up and away from door. remove screws holding circut board. lay panel on counter and remove metal rod and put in new handle, it can only go one way. install handle into panel and snap in place. reinstall circut board, slide bottom of panel in first, reinstall 4 screws.15-20 min job. I also installed a new cover over the front panel because the old one was bad.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 7 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Socket set
Customer: Dan from Albuquerque, NM

Got home and my wife couldn't the dishwasher door!

After throwing a fit- I looked on the internet for any drawings from the Kitchenaid website. There were none. I then started taking apart the dishwasher, took apart the entire front door. Found that the door handle was broken and went online to find the part. Partselect.com had the drawing of the door assembly, realized that I didn't need to take apart the whole door! Reassembled the door while waiting for the part, then using the partselect drawing, removed only the parts necessary and replaced the broken part!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 37 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers
Customer: SUSAN from CLEARWATER, FL

Bought new ref. And stove and it didn't match in color

No repair just changing color. As a women I went online and ordered all the parts I thought I would need and they arrived within a few days. Everything went together perfect. We used the parts list from online. First time everything was right and worked perfect. My husband put everything together and I kept my fingers crossed.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-9 of 9

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11747089
Manufacturer Part Number: WP9743903
Brand Model Number Description
KitchenAidKUDG25SHAL0Dishwasher
KitchenAidKUDG25SHAL1Dishwasher
KitchenAidKUDG25SHBL0Dishwasher
KitchenAidKUDG25SHBL1Dishwasher
KitchenAidKUDG25SHBT0Dishwasher
KitchenAidKUDG25SHBT1Dishwasher
KitchenAidKUDG25SHWH0Dishwasher
KitchenAidKUDG25SHWH1Dishwasher
KitchenAidKUDI24SEAL0Dishwasher
KitchenAidKUDI24SEAL1Dishwasher
KitchenAidKUDI24SEAL2Dishwasher
KitchenAidKUDI24SEAL3Dishwasher
KitchenAidKUDI24SEAL4Dishwasher
KitchenAidKUDI24SEAL5Dishwasher
KitchenAidKUDI24SEBL0Dishwasher
KitchenAidKUDI24SEBL1Dishwasher
KitchenAidKUDI24SEBL2Dishwasher
KitchenAidKUDI24SEBL3Dishwasher
KitchenAidKUDI24SEBL4Dishwasher
KitchenAidKUDI24SEBL5Dishwasher
KitchenAidKUDI24SEWH0Dishwasher
KitchenAidKUDI24SEWH1Dishwasher
KitchenAidKUDI24SEWH2Dishwasher
KitchenAidKUDI24SEWH3Dishwasher
KitchenAidKUDI24SEWH4Dishwasher
KitchenAidKUDI24SEWH5Dishwasher
KitchenAidKUDM24SEAL0Dishwasher
KitchenAidKUDM24SEAL1Dishwasher
KitchenAidKUDM24SEAL2Dishwasher
KitchenAidKUDM24SEAL3Dishwasher