Replacing your KitchenAid Dishwasher Upper Wheel Gasket
Troubleshooting
This part works with the following products:
Dishwasher.
Part# WP9743002 replaces these:
AP6013840, 9743002
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The connection point for the Assembly is from the outside of the unit so the machine had to be pulled out of the counter
Removed the mounting screws shorten the leveling legs to minimum and I was able to slide the machine out enough to reach the mounting screws without unhooking the water or electrical , if doing the rear assembly disconnecting everything is the only way on my installation.
Lower wheel broke off upper wheel mount and dishrack wheel broke on the opposite side
Have all the tools at your disposal. Remove top rack after removing the track stop. Remove 2 screws that hold unit in to cabinet. They are under the little caps. That is when you need the magnet for the screwdriver. Wiggle tub out of space and remove hex head screws that hold the wheel mount. Save the gasket for install. Put things
... Read more back the way they came off. Changing the upper dishrack requires some twisting and gentle pressure. Even if one is broken, replace all 4. Put back the screws to the cabinet and the end caps.
Loosen screws and pulled out dishwasher, remove screws on the old rack tracks and screwed new rack tracks on. Pushed back in dishwasher and tightened screws. Very easy to replace.
I broke the wheel off the dishrack when I slipped and hit the edge. I was able to find the part easily on the part select website. I ordered and received the part in 3 days. Very easy fix even for a novice like me. Thanks part select. Rick Barber
The top rack began to fall out of the track on the right side. Replacing it into the track was not a permanent fix. I could not visually see anything wrong but obviously something was. A web search quickly brought up a picture of that area of our machine. I ordered the part and upon installation,
I had to getto the side of the machine. After that, it was simply removing 4 screws and removing the old part, replacing the screws and putting the rack back in the track.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
April 16, 2019
Need white roller for upper rack. It holds rack onto to side bracket.
For model number 665.1326
Hello Jerry, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the full model number of the unit. Model 665.1326 is incomplete. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
December 18, 2021
Left upper track is disconnected from the wheels. The Two “axels” that support the plastic wheels are broken. I need to order these two parts.
For model number 665.14753N510
Hello Michael, thank you for your question. We have researched the model you have provided, and we would suggest the Upper Rack Adjuster Kit, part number PS10065979. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hi. I need a new white roller ball for the top rack. It looks like the plastic piece in the middle of the ball has broken. Can you please advise. Many thanks !
For model number 665.14749N513
Hey Jane, thank you for your inquiry. We have researched your model and found that you may need to replace your upper rack adjuster kit part number PS10065979. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
