Whirlpool/Whirlpool_Thumb/4RJMBESC.gif
See part 3 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Speed Control Lever

★★★★★
★★★★★
12 Reviews

Rated by 3 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 3KSM150PSTWH0!
 Fits your 3KSM150PSTWH0!
PartSelect Number PS11747016
Manufacturer Part Number WP9709276
Manufactured by Whirlpool
Product Description

Speed Control Lever Specifications

The speed control lever on your stand mixer allows you to adjust the speed that the mixer is running at. The lever is approximately 3.5 inches long, with a black plastic handle at the top. The speed control lever connects to the interior of your stand mixer, so you will have to take it apart to access the bar that the lever is attached to. Once you’ve opened the mixer, you can unscrew the old lever, taking care not to misplace the screw or washer that holds it in place. Replace the old lever with the new one, and then put the mixer back together.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP9709276 replaces these:
AP6013789, 3184193, 9709276
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

7 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathy
December 7, 2017
Will this part fit my appliance? I just need the knob but looks like i have to order the whole part. Thanks
For model number KSM95GR
Hi Kathy, Thank you for your question. Yes, this lever works with your appliance and you would have to order the whole lever. The knob does not come separately. Good luck with your repair.

13 people found this helpful.

Was this helpful?
Thank you for voting!
Chris
February 6, 2018
All I need is the speed control knob. I bumped it and it cracked in half, I have glued it but not sure how long it will last. Thank you
For model number KSM500QAC0
Hi Chris, Thank you for the question. The knob is not sold separate from the Lever. In order to replace the knob the lever will also need to be replaced. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Chris
February 6, 2018
Seen the answer to my question. I only needed the knob. Will this lever work with my model no
For model number KSM500QAC0
Hi Chris, Thank you for your question. Yes, this speed control lever with knob will work on your appliance. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Francis Rogers
November 3, 2017
Speed control slide stuck when i returned to off position. I have the case ready to take off all screws etc remove tried to pry top but decided to call or leave message on how to remove the top case
For model number 3
Hi Francis, Thank you for your inquiry. Here is a video YouTube that you may reference on how to remove the case or motor housing from the mixer. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Florian
March 5, 2018
The plastic knob of the speed control lever broke. Can I get just the plastic knob - I don't want to take any risks by taking apart the whole machine to replace the lever. Thx
For model number KS150
Hi Florian, Thank you for the question. The knob should stay attached to the lever for proper operation so they can not be sold separate. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ray
October 25, 2022
Move the speed control arm to stop and it stops but slips back to the first speed automatically.. All of the other detents for speeds work.
For model number KSM150PSAQ
Hello Ray, thank you for reaching out. According to our research on the model, the control plate spring appears to be faulty and you may need to replace it with part number PS11740854. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!

Was this helpful?
Thank you for voting!
Related Parts:
Chris
November 29, 2022
the control lever won't stay in the off position. do i need to replace the lever?
For model number ksm90bu
Hello Chris, thank you for asking. Our research shows that you may need to replace the control spring, part number PS11740854. This spring is attached to the lever and controls its position. If replacing the spring does not work, you may need to replace the lever, part number PS11747016. We would also recommend checking the screw, part number PS11738270. A loose or damaged screw can also cause this issue. Please reach out to customer service if you need help placing an order. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 2.9 / 5.0, 3 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Speed Control Lever KNOB BROKEN
Pulled the Knob off of the new Lever then pressed it on the old Lever. I had to order the whole lever because it was the part nearest the knob in the illustrated parts break-down. I RECOMMEND THAT THE KNOB BE ADDED TO THE ILLUSTRATED PARTS BREAK-DOWN.
  • Robert from Minot, ND
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
145 of 183 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mixer was overloaded, and began to smell hot and make noise. Did not recover when load was removed.
I disassembled the mixer using a YouTube video as a guide. Disassembly was easy, as everything was held together with pins and threaded fasteners, and all electrical connections were plug-on.

Cleaning out the old grease was messy and time-consuming. I used a putty knife, screwdrivers (used them like small putty knives in the crevasses), paper towels, and finally, small cloths dampened with alcohol. After about a hour (maybe 90 minutes) everything actually looked like new.

I originally diagnosed the problem as the plastic gear loosening up from it's hub, so I ordered the complete gear tower assembly. It turned out not to be the problem- the gears were fine. With the gears removed to eliminate load, I applied power and saw that the original symptom was still there.

Further research turned up that this symptom is more likely a failed field coil, or possibly the phase control board. I ordered both from PartSelect. In the meantime, I tested the armature by measuring the resistance across the brushes as I slowly turned it by hand. At every angle, the resistance was about 7.5 ohms. Nothing lower, and no opens, so I'm pretty sure the armature is OK.

The phase control board arrived, but as of this writing, the field coil has been back ordered for almost a month. While I waited, I tried a partial reassembly of the head with the new board, and it worked! This weekend, I'll finish reassembly of the motor unit to the base/gearbox and calibrate the speed governor. In addition to the new gear tower and phase control board, it has new grease, seals, and both side levers (tilt and speed control) that had lost their knobs some time ago.

Hopefully it will be ready for another quarter century of use!
Other Parts Used:
Phase Control Board Transmission Case Gasket End Seal
  • James from WEST NEWBURY, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Speed switch wouldn’t stay in off position
Watched a YouTube video to disassemble,from there went smoothly. One small piece of advice,take pictures with your smart phone during the process. Makes remembering easier.
Other Parts Used:
LINK-SPEED Speed Control Plate
  • Steven from CUBA, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
12 Reviews
3.8
Filter By Rating:
  • 5 Stars
    8
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747016
Manufacturer Part Number: WP9709276
Brand
Model Number
Description
KitchenAid
3K45SS
Mixer
KitchenAid
3K5SS
Mixer
Whirlpool
3KSM150PSTAQ0
Mixer
Whirlpool
3KSM150PSTBM0
Mixer - Stand Mixer
KitchenAid
3KSM150PSTBW0
Mixer - MIXER
KitchenAid
3KSM150PSTCB0
Mixer - MIXER
KitchenAid
3KSM150PSTCL0
Mixer - MIXER
KitchenAid
3KSM150PSTCU0
Mixer - MIXER
Whirlpool
3KSM150PSTDR0
Mixer
KitchenAid
3KSM150PSTER0
Mixer - MIXER
KitchenAid
3KSM150PSTGA0
Mixer - MIXER
Whirlpool
3KSM150PSTIC0
Whirlpool
3KSM150PSTLR0
Mixer
Whirlpool
3KSM150PSTMH0
Mixer - Stand Mixer
KitchenAid
3KSM150PSTMY0
Mixer - MIXER
KitchenAid
3KSM150PSTOB0
Mixer - MIXER
Whirlpool
3KSM150PSTPA0
Mixer - Stand Mixer
Whirlpool
3KSM150PSTPK0
KitchenAid
3KSM150PSTTG0
Mixer - MIXER
Whirlpool
3KSM150PSTVB0
Mixer - Stand Mixer
KitchenAid
3KSM150PSTWH0
Mixer - MIXER
Whirlpool
3KSM150PSTWM0
Mixer
KitchenAid
3KSM5CBTER0
Mixer - MIXER
KitchenAid
3KSM5CBTWH0
Mixer - MIXER
Whirlpool
3KSM95TCZ0
Mixer
Whirlpool
3KSM95TWH0
KitchenAid
4K45SS
Mixer
KitchenAid
4K45SS7OB0
Mixer
KitchenAid
4K45SS7WH0
Mixer
KitchenAid
4K45SSDWH-1
Mixer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service