Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Don W - April 13, 2023
Verified Purchase
Fixed my Kenmore 6 QT Mixer
The part was easy to install and exact form, fit and function.
★★★★★
★★★★★
Renee L - December 22, 2022
Verified Purchase
Easy repair
Ordering the part and putting it in my kitchen aid was so simple. Customer service was great in helping me order. My mixer runs like it is new!!
★★★★★
★★★★★
Elizabeth S - January 27, 2022
Verified Purchase
Easy repair
Part was just what we needed!
★★★★★
★★★★★
Keith B - December 12, 2021
Verified Purchase
Pretty easy repair, small jewelry screwdrivers helpful
To remove the speed sensor it helps to have two small flat bladed jewelry screwdrivers to compress the locking tabs so the encoder can be pulled from the housing.
★★★★★
★★★★★
Sally A - August 15, 2021
Verified Purchase
Great part easy fix for speed control
Easy purchase
★★★★★
★★★★★
Walter L - July 22, 2021
Verified Purchase
Easy repair
Took about 10 min. very simple.
★★★★★
★★★★★
Richard Q - November 24, 2020
Verified Purchase
Ordering and install was a breeze
The manufacturer made some wiring changes from version 1 to version 2 of the circuit board on this part. However, the four wiring spade terminals are marked and installation was a snap. Thanks Part Select.
★★★★★
★★★★★
Cindy W - March 11, 2020
Verified Purchase
great Part
Part worked great, fixed my mixer right up and I am back in business.
★★★★★
★★★★★
Rita N - December 30, 2019
Verified Purchase
Part worked perfectly
Medium difficulty repair but helps to watch you tube videos. Just make sure to connect wires to same connector spots written on new board.
★★★★★
★★★★★
Thomas I - September 10, 2019
Verified Purchase
Easy repair, worked great!
Perfect fit, worked just fine. Very happy I was able to repair the blender the first time!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 26 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
2nd speed on mixer would not come on at times without jiggling switch
Removed top cover of mixer which was very easy. Then marked the 4 wires so they could be plugged back to new switch correctly. Removed 2 attaching screws to remove switch and one squeeze connector. Installed new switch after plugging on 4 wires. Snapped squeeze connector in place. Reinstalled top cover.
Jack from BLUFORD, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Board fails, causing motor runs at high speed only
3d time in 20 years, but the mixer itself is built like they did 20 yrs ago PartSelect had the part in my mail box in *20 hours* from online order! See https://www.ereplacementparts.com/kitchenaid-4kp26m1xmc4-professional-stand-mixer-parts-c-114958_114959_115101.html for instructions. BUT - they changed the design so a power s
... Read morewitch previously separate from (to the left of) the circuit board is now a microswitch integrated on the board, leaving you with ONE LESS WIRE. Attached is the fix diagram & directions for the new design.
Read less
Jeffrey from GLENMONT, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacement of Speed Control Board/Knob Assembly
1) Unplug power cord from outlet. 2) Remove #2 Phillips screw from metal band at the back of the mixer. 3) Remove band and set aside. 4) Remove 4 #2 Phillips screws that connect top of mixer housing with bottom. 5) Gently pry up on top housing to remove. 6) Remove two screws hold original speed board in place.
... Read more 7) Old board and new board may have board components in different locations. 8) Lugs are marked Motor 1, Motor 2, Line 1 and Line 2. 9) One at a time move a lead from old board to new, making certain you match the leads up to the printing on the board. e.g.; Motor 1 must go to Motor 1. 10) When all leads are moved install new board with the two screws. 11) Put top back on and install four screws. 12) Clean and install stainless steel band. 13) Plug in and bump start to check for proper operation.
Read less
Keith from OKLAHOMA CITY, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor knob
Watched utube video how to repair and ordered part, easy
Susan from KIRBYVILLE, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mixer slow to turn on and/or register a change in speed
I followed the instructional video closely. My old circuit board was labeled and laid out slightly differently than the new one, so in addition to labeling the wires with "color" or "motor" label from the old board, I also made sure to label with more identifiers that were included on both boards such as "P1" or "P2". Once I labeled the
... Read more wires with all the information, removal of the old board and installation of the new board was straightforward. This isn't the first repair I've made on my KitchenAid but it was by far the simplest.
Read less
Kimberly from MORGAN HILL, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
unit would only operate at high speed
using Phillips screw driver, remove 5 screws - take off cowl (cover)l. remove 2 screws holding speed control assembly unplug old speed control assembly (4 plugs) and plug in new speed control unit - reassemble cowl .
EBEN from WEST PALM BCH, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad speed control
Thank goodness for YouTube. Pretty much followed the process of taking it out. Was easy, but having a video made it a bit simpler.
Thomas from LILBURN, GA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Speed control panel was replaced
Just followed the video.amazing!!got my kitchen aid back.
Madeleine from NEW YORK, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Speed control switch
Removed screws holding top, then removed the switch retaining screws. Removed and replaced switch wires and re assembled cover.
Keith from OKEECHOBEE, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Speed control switch went out
Unplugged wires from old switch, plugged them into the new switch. The new Switch have the mounting brackets in different places from the old one. Be sure to match up the numbers by the posts with the correct wires
Joyce from STRAWBERRY PT, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
41 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
November 18, 2017
Does the speed control switch come with the control board now? When i search the part number it only brings the control board up.
For model number W10183208
Hi Kevin,
Thank you for your inquiry. Yes, the control board does come with the speed control switch. I hope this helps. Thank you and have a great day!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
January 17, 2019
Hello, i have a KitchenAid stand mixer, the speed switch is hard to move. Do i have to replace the speed control board with the switch inside it or is there just a speed switch, the speed of the mixer works just fine, only issue is a hard to move switch. Thank you
For model number KG25H3XER
Hi Gary,
Thank you for your question. The board and switch come together. You will need to replace the speed control assembly switch. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Eileen
November 19, 2017
Does it include speed sensor cable part?
For model number Kp26m1xer
Hi Eileen
Thank you for your question. Yes the cable is included with the speed control switch. I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
August 10, 2017
Does this control board work for the the 6qt., 590w professional 610 stand mixer?
For model number KP26N9XNP
Hello Jim, that is a great question. This is the correct part for your model. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Scott
December 29, 2017
Does this motor have the 4 or 2 electrical leads. I need the part with 4.
For model number Professional HD 600
Hello Scott, Thank you for your inquiry. This speed control has 4 wires and a ribbon wire that attach to the speed control. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
David
February 11, 2019
The defective speed controller pcb from this mixer is stamped both p/n 9707221 rev d and p/n 970220 rev b. What is the current replacement p/n? Your on-line listing states that current p/n wp9706648 replaces 9703312/9706052/9706648/9707511. None of these p/ns are exact matches with the p/ns on my control board.
For model number KP26M1XPM
Hello David, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11746947. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Samat
September 7, 2021
Does this work on my 6qt KitchenAid stand mixer?
For model number KL26M1XER
Hello Samat, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11746947. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
March 10, 2023
Hello, i have a KitchenAid stand mixer, the speed switch is hard to move. Do i have to replace the speed control board with the switch inside it or is there just a speed switch, the speed of the mixer works just fine, only issue is a very hard to move switch. Thank you. Is the correct part for this repair the one you list as: PS11746947
For model number KP26M1XPM
Hello Richard, thank you for the great question. Based on our research, the speed switch does not come individually. It comes in assembly with the speed control board, part number PS11746947. So you need to replace the speed control board to fix this issue. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Darla
March 11, 2023
The part numbers on my model's board say FSP 9707221 Rev C and 9707220 Rev A. Mine looks to have additional wire attachment points on upper right. Does WP9706648 directly replace this speed control unit?
For model number KP26M1XWH
Hello Darla, thank you for your question. Yes, this board is a compatible replacement. We are pleased to have been able to help.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Walt Auen
February 26, 2019
Does control panel and speed sensor came with part number ps11746947? Thanks walt
For model number Ps11746947
Hello Walt, Thank you for contacting us. The control panel is not included. This piece is a control board with speed control and sensor. Have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
