Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Anna B - May 1, 2018
Verified Purchase
great past easy to replace
stage part was in great condition and easy to replace with the instructions i got from the advice email.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Maytag Washer
Order the parts needed the washer working ASAP - Three partsf explain several times what I needed - paid extra for express shipping by Fed Ex took more time then regular US Mail. When I receive the parts only received two - one the important parts when to a local appliance parts store while waiting for my shipment and completed
... Read morethe repair. Waiting for a refund and additional shipping cost -very disappointed have use your company along time - that why both Maytags are having their 40th Birthday.
Replaced drain pump & then replaced water mixer. This was difficult as I could not find videos to get into my 35 year old Kenmore 80 Series. We had to "wing it." Got it done & now I have cold water & no leak & it drains/spins. The parts were spot on!
This was an easy repair. 1st I removed both water hoses 2nd I removed 1 hex head screw that released a backing plate & removed the plate holding the water inlet valve. 3rd I pulled the 4 electrical connections & loosened a clamp to remove a small water hose. 4th I removed 2 hex head screws that held the water valve to
... Read more the backing plate. -----------that was a whole 5 - 10 minutes!------------ Next I reversed the process 4th I attached the inlet valve with the 2 hex head screws 5th re-attached the 4 electrical connections(had slip on spades) pushed on the hose & tighterned the clamp. 6th replaced the backing plate with the inlet valve attached & tightened the single hex head screw. 7th re-attached the hot & cold lines................................DONE 15 minutes tops
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ronald
November 12, 2019
How do you remove the filters from the back of the machine & replace them
For model number MVWB765FW1
Hello Ronald, Thank you for the question. You will need to turn off the water supply. Next remove both Fill Hoses to the Water Valve ports. With Needle Nose Pliers, remove the old Screens and then push the new ones into the port of the Valve in their place. Attach the Fill Hoses and turn on the water supply. Hope this helps!
14 people found this helpful.
Was this helpful?
Thank you for voting!
David
January 11, 2022
Will mfg. part #wp96160 fit a Maytag washing machine model# mhw6630hw0?
For model number MHW6630HW0
Hello David, Thank you for the question. Very sorry, the Screens for this model are only sold as part of the Valves. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
