11746860-1-M-Whirlpool-WP913108-Dishwasher Pump Grommet
Part Location Diagram of WP913108 Whirlpool Dishwasher Pump Grommet
See part 21 in the diagram
( Grid squares measure 1x1 inch )
11746860-1-S-Whirlpool-WP913108-Dishwasher Pump Grommet 11746860-2-S-Whirlpool-WP913108-Dishwasher Pump Grommet 11746860-3-S-Whirlpool-WP913108-Dishwasher Pump Grommet Part Location Diagram of WP913108 Whirlpool Dishwasher Pump Grommet
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Dishwasher Pump Grommet WP913108

Rated by 2 customers 

A Bit Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 9.28
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11746860
Manufacturer Part Number WP913108
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Magic Chef, Jenn-Air, Maytag, Crosley.
Part# WP913108 replaces these:
AP6013633, 9-13108, 913108
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.1 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dish washer was leaking water
I disconnected the dish washer and pulled it out. I laid it on its back, unplugged the electrical wires,removed the electrical magnet and pried the shaft seal out with a flat screwdriver. I gently packed the new seal into place with the flat screwdriver. I connected the electrical magnet and wires. I then installed the dish washer and ran it through a cycle. I am pleased to say the dish washer does not leak now.
Read less
  • Emmett from FERNLEY, NV
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower Motor Tub Leaking
Had to remove the lower spray arm, then the cover exposing the housing assy. Then turn over the Dw and remove the wiring, disconnet the hoses drain and upper srayer. Release the locking ring. Lift the housing up and out through the DW. Then disassenble the housing removing the motor, drain assembly, and water blade assy. Then install the seal on the drain assy on the new unti, re-install the housing parts, and motor, then place in DW, re-install locking ring. re-wire, connect hoses. Replace the lower spray arm. Turn electricty and water and test for leaks. You have to really watch the seals.
Read less
Other Parts Used:
"D" Shaft E Clip Dishwasher Pump Grommet
  • Frank from Terrell, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
4 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Don
August 16, 2019
Hello, will Whirlpool part #wp913108 work with the model dishwasher i provided?
For model number Maytag MDBH949AWS4
PartSelect logo
Hi Don, wp913108 is not showing as compatible. Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
"E" Clip - D - Shaft
$11.07
$11.07
  No Longer Available
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746860
Manufacturer Part Number: WP913108
Brand
Model Number
Description
Crosley
CDC400B
Dishwasher
Crosley
CDC450B
Dishwasher
Crosley
CDC5J
Dishwasher
Crosley
CDU20J
Dishwasher
Crosley
CDU250B
Dishwasher
Crosley
CDU250V
Dishwasher
Crosley
CDU2J
Dishwasher
Crosley
CDU400B
Dishwasher - Undercounter
Crosley
CDU450B
Dishwasher
Crosley
CDU450V
Dishwasher
Crosley
CDU5J
Dishwasher
Crosley
CDU5JV
Dishwasher
Crosley
CDU600B
Dishwasher
Crosley
CDU600V
Dishwasher
Crosley
CDU8000B
Dishwasher
Crosley
CDU8000V
Dishwasher
Crosley
CDU8J
Dishwasher
Magic Chef
DC4000B
Dishwasher
Magic Chef
DC4500B
Dishwasher
Magic Chef
DC5J
Dishwasher
Magic Chef
DU2000B
Dishwasher
Magic Chef
DU2000B-C
Dishwasher
Magic Chef
DU2000V
Dishwasher
Magic Chef
DU2000V-C
Dishwasher
Magic Chef
DU2000W
Dishwasher
Magic Chef
DU20J
Dishwasher
Magic Chef
DU20J-CAN
Dishwasher
Magic Chef
DU20JV
Dishwasher
Magic Chef
DU2100B
Dishwasher
Magic Chef
DU2500B
Dishwasher
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Dishwasher Pump Grommet
$ 9.28
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.