Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gabriela
March 21, 2019
Hi there, I just bought a Maytag portable dishwasher from an Estate sale and cuppler/hose connect seems quite old and keeps popping off our our faucet when the water starts at a higher pressure. The faucet attachment is fine (we even bought a new one to make sure of it). Will this hose part work for this model?
thanks,
gabriela
For model number DWC7400AAW
Hello Gabriela, thank you for your question. Yes, Fill / Drain Hose Assembly part PS11746837 is compatible to your model.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Dianna
January 10, 2020
The gasket that fits into the end of the fill/drain assembly hose is missing causing it to leak when connected to faucet. Can the gasket be bought separately or do i need to replace the whole drain/fill assembly hose. It is for a Maytag portable dishwasher.
For model number MDC4650AWW0
Hello Dianna, thank you for your question. Unfortunately, the gasket that goes inside the adapter on the hoses is not sold separately. The fill/drain hose assembly, which is PartSelect Number PS11749861, would have to be replaced. I hope this helps!
Can WP903404 be used in MDC4650AWW instead of WP99001868
For model number MDC4650AWW
Hello John, thank you for writing. Our research indicates that they can be interchanged as portable dishwasher connections are usually 3/4". We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Scott Vandenberg
September 16, 2019
I just got a GE pot scrubber portable dishwasher. Dont see a model number on it anywhere, but how do i connect it to faucet?
Hello Scott, thank you for your question. Here are some instructions we have found for you!
Loosen the aerator from the spout of the kitchen sink. Use a pair of pliers if necessary. Unscrew the aerator and store it in a safe place for future use.
Screw the special faucet adapter that was included with your portable dishwasher onto the threaded faucet spout. Turn on the hot water at the kitchen faucet, and allow the water to run until it is hot to the touch. Turn the water faucet off.
Roll the dishwasher over next to the sink. Pull the hoses from their storage compartment on the back of the dishwasher. Position the collar on the end of the hoses directly beneath the adapter on the kitchen faucet spout. Push the collar ring downward, and slide the collar onto the faucet adapter before releasing the collar ring. The collar should be securely attached to the faucet. Turn the hot water to the faucet back on.
Plug in the dishwasher's electrical cord to a nearby AC outlet.
Load the dishwasher, select the desired wash cycle, and start the dishwasher.
I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Colin
June 5, 2019
Does this fit Whirlpool dishwashers?
Hello Colin, thank you for writing. We will need the model number for your Whirlpool to look into this for you.
Was this helpful?
Thank you for voting!
Keivn
August 30, 2019
Can this kit be a replacement for a Kenmore dishwasher? The part# for the Kenmore hose assembly is wpw10273574.
Hello, thank you for your question. The two parts are not shown as interchangeable. We can look further into this with the model number for your dishwasher. Good luck with your repair!
Was this helpful?
Thank you for voting!
Cynthia
May 29, 2019
How about for a compact washing machine? :)
Hello Cynthia, thank you for writing. We would be happy to look into this, but we will need the model number for your washing machine to do so. We look forward to hearing back from you.
Was this helpful?
Thank you for voting!
André
August 8, 2022
Does it work with my Maytag portable dishwasher model MDC4809AWW0 SERIE F04113812?
For model number MDC4809AWW0
Hello Andre, Thank you for your inquiry. We have researched the model number you have provided and do not show this part as compatible. The compatible part number is PS11730972. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Will this hose replacement work for my model? The plastic part that connects to my snaplock faucet adaptor is cracked!
For model number MDC4650AWW
Hi TJ,
Thank you for your question. This would not be the correct part for your dishwasher. The part number for the coupler and hose assembly is PS11747623. We hope this helps!
Will hose kit #903404 work for this model? This unit will be used as a portable dishwasher.
For model number wdf518saf
Hello Robert,
Thanks for your question. No, that part is not compatible with your model. The drain hose for your model is part number PS11756389. The fill hose is part number PS7321164.
I hope this helps.
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Faucet connection leaking, door leaking
Use towels to catch water that spills from unit. Lay unit on side to expose bottom. Remove plastic retainers, rear wheels, and bottom cover. Disconnect inlet and discharge hoses. Tie pull cord onto each hose separately. Temporarily re-install rear wheels. Set uinit upright. Remove two star screws from underside of wooden top. Slide top forward to release and remove top. Remove tie strap holding hoses to inner bracket. Lay unit on side again and pull hoses out. Remove discharge hose first to allow removal of inlet hose from plastic housing on back of unit. Tie pull cords to new hoses. Pull new hoses into unit. Reconnect hoses. Turn unit upright. Replace tie strap on bracket with new hoses. Hoses are marked as to where they should be secured to the bracket. Replace top. Remove old door gasket by pulling from one end of gasket. Clean gasket groove. Push new gasket into place. Close door to seat gasket. Remove and replace faucet adapter kit. Run unit and check for leaks. Lay unit on side, remove rear wheels, replace bottom cover and plastic retainers, reinstall rear wheels.
the coupling for the water hookup for my rollaway dishwasher was very badly damaged. After looking everywhere including authorized dealer and repair places, on-line at the manufactures parts website, I finally broke down and ordered the entire hose assembly. When it arrived, I simply used a toothpick to carefully remove the new gasket from the new part and put in the the old one. It took about 30 seconds and works perfectly. I paid 60 bucks for a tiny little washer, but I have an extra hose assembly if something should go wrong in the future.
John from Lomax, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
15 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the hose wouldn't grip the faucet anymore it would fall off.
i took the dishwasher apart, took off the old hose and replace it with the new one. it was real easy. i smiled as my two yr. old tried to help me . i'm sure i'll be odering other parts in the future.
madison from greensboro, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
14 of 23 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
DRAIN FILL HOSE WOULD NOT STAY ON THE FAUCET
this is a portable unit the wood top is removed this allows access to the side cabinet screws and the lower front trim screws behind the lower front trim panel you can access the hose connections disconnect and reinstall new part works great!
gregory from BROOKFIELD, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Faucet adapter leaks due to torn seal in adapter
I only really needed the lip seal that fits in the faucet adapter. After much research I discovered that the seal was simply not available. I tried to substitute a standard O-ring of the correct size, but it was too thick and did not allow the adapter to snap on to the faucet.
I purchased the complete hose assembly from Partselect.com, and received it quickly. I used a small screwdriver to remove the seal from the new hose assembly, and installed it in my existing hose assembly. The seal was a perfect match with the old one, it fit perfectly, and no more leaks.
Be careful not to damage the new seal when you are removing it. Also, be advised that if you choose to replace the entire hose assembly that you may need to replace the areator on your faucet, in this case the new hose would not fit on the existing areator, but fortunately the seal was a perfect match.
MICHAEL from BLACK EARTH, WI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.4
Filter By Rating:
5 Stars
2
4 Stars
3
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gregory M - July 25, 2021
Verified Purchase
easy repair quality factory part
part shipped quickly dishwasher as good as new
not to difficult to complete remove top and side cabinet and lower front panel
to access connections Thank you PartSelect!
★★★★★
★★★★★
Aaron B - June 1, 2021
Verified Purchase
Moderately easy repair, made easier with a helper. Instructions were adequate.
Existing drain hose clamp was permanent, non-reusable. New clamp was not included with hose assembly. Required trip to hardware store for new clamp.
End of drain hose required a lot of stretching to fit over drain connection.
★★★★★
★★★★★
John S - October 29, 2018
Verified Purchase
It fit perfectly!
Part arrived on time and in great shape. These jobs are always are a little harder than they look, but the hose fit perfectly and my dishwasher is back in business.
★★★★★
★★★★★
Diane M - October 16, 2018
Verified Purchase
Change of plans
Part arrived promptly, but repair time and directions seemed too difficult to do by ourselves. A repairman we contacted felt the unit was too old and probably too unpredictable to put that much time and money into repairing it. Part was returned per instructions; we are awaiting credit to our charge card; assuming this occurs as promptly, we will be very satisfied with your service.Thank you
★★★★★
★★★★★
Richard W - April 24, 2018
Verified Purchase
Easy Repair
The part was not the one pictured. It still fit the dishwasher, and the repair was pretty straight forward. I did have to replace the fitting on my faucet..
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746837
Manufacturer Part Number: WP903404
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
