This upper dishwasher dishrack roller, also known as a dishrack wheel, allows you to roll the dishwasher rack easily on the support rails. If your dishwasher rack is disconnected or the rack is broken, then replacing this part might be the solution. The first step in this repair is to remove the upper dishrack from the track, the next step is to remove the defective rack roller and replace it with the new one by sliding it onto the shaft and locking it in. No tools are required for this replacement and customers rate this project as easy. The roller is entirely made from plastic and is just over an inch in diameter.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Dishwasher White Dishrack Roller
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Katherine M - February 18, 2020
Verified Purchase
Easy repair
Once the two items were put together, the person repairing my dishwasher rack (family member) easily snapped it on the rack. We had make some adjustments because my dishwasher is so old, that the upper rack was not quite the same as pictured for my model dishwasher. It is working however, so no complaints. I could not put the two pieces together as I wasn't strong enough and it took two people. One to squeeze the one piece together so it would fit int the other piece being help by another person.
★★★★★
★★★★★
Robert M - May 7, 2019
Verified Purchase
Lighting fast delivery + easy repair = winning!
Part was delivered within 3 days of ordering, repair took less than 10 minutes. Saved myself $150 bucks by avoiding the dishwasher repair man!
★★★★★
★★★★★
JOHN D - March 27, 2019
Verified Purchase
Need to return
I need to return as this was not the right part. I used the mod and ser number from washer so not sure why it didn’t work . Can you send me instructions to return ?
March 27, 2019
Hello,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
★★★★★
★★★★★
Karen C - September 18, 2018
Verified Purchase
Easy repair
The website and the video on the website were so very helpful! I am a single mom and did it all by myself easily. With the help of the video…
★★★★★
★★★★★
Carol J - July 4, 2018
Verified Purchase
wrong part
It wasn't the right part.
★★★★★
★★★★★
David S - February 14, 2018
Verified Purchase
Good stuff
Great service, fast delivery and exactly what I ordered.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 23 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The upper tray came crashing down on top of the lower tray because a couple of wheels let go over time.
I ordered the parts after looking at the diagrams. I ordered a total of 5 pieces. The parts arrive earlier than expected, and were new, OEM, parts. I cannot stress how important it is to order Original Equipment Manufacturer parts. I replaced the broken pieces within 30 minutes. Great experience.
The hardest part was the roller had to inserted into shaft/mount one roller broke off replaced all 4 used part select for washing machine and dyer quick delivery and good parts. will use again
Wheel axle had broke and the wheel was not connected.
Actually following the online video is the way to go.
Jeff from BURLINGTON, WI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original roller broke @ shank.
Followed instructions given on the web. Replacement went smoothly, but...description of part said it was for Maytag as well as several other brands. However, this part clips on to the wire basket, where the original part screwed onto the track arm. Therefor, it will not stay on track, and basket vibrates when moving it in and out of d
... Read moreishwasher.
Read less
Mary J. from Roseville, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rack roller broke
I opened the end stop of the rack, replaced the roller, and put the end stop back on. I can't believe I paid the repairman the last time $125????? An he put in a regular screw that rusted and broke the roller. Took me 3 minutes! Thanks
Kathy from Lombard, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
497 of 502 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dishwasher roller axle needed to be repaired
I watched the installlation video found on the wedsite and followed his directions.
Rosemary from Toms River, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
374 of 378 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken top rack roller
I simply looked at the other side (which was still functioning) and put the new one on but in reverse (left side/right side) I also was missing the end stop to the slide and simply popped that in and snapped closed. Two simple parts and 15 mins. solved a whole lot of aggrivation, without any aggravation! wish I had found this
... Read more site sooner!
one of the rollers holding up the top rack of our dishwasher broke off
The old part had already broken off. My husband took a few minutes to see where it went and then snapped it on. It was a breeze.
Jessica from Covington, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken roller upper left rack
Remove end cap of guide. Remove broken roller. Install new roller, clip in place, replace end cap. easy peasy.
Larry from Sherman, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electric range oven's element wouldn't heat up and Dishwasher's upper rack wont roll out
The sketches on PartSelect.com were very-very helpful, in picking up the parts to order and also while fixing the parts.
For oven range. First I removed the two screws that hold the flat top in place and lifted the flat top. I then unscrewed the two screws that holds the element kit. Disconnected the three wires, and replaced t
... Read morehe broken element with the new one. All done.
For dishwasher, just snapped the parts in and all set.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
CHERYL
July 10, 2019
How many rollers are in the package?
For model number DWU7400BAX
Hello Cheryl, thank you for your question. This replacement Dishrack Roller for your model is sold individually.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
March 4, 2020
I have above mentioned dishwasher i need part #ps11746834. However the piece of the rack that held the part has broken off. All others are in good shape. I have seen on your site that there are snap on rollers. Would you recommend a part.Thanks
m. laurita
jldominic@bright.net
For model number DWU7400AAX
Hello, Thank you for your question. When you order that part you will get the Wheel and the plastic piece that the wheel goes onto. We hope this helps.
Was this helpful?
Thank you for voting!
Andrew
January 8, 2020
This upper dishrack wheel assembly has two pieces: The wheel and the mounting bracket (both white plastic). I ordered one and it came in two parts. I can't fit them together (tube video not with standing). How can I order them already put together?
Hello Andrew, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dishwasher","title":"Dishwasher","url":"/Dishwasher-Parts.htm"},{"position":2,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/Dishwasher-Wheels-and-Rollers.htm"},{"position":3,"name":"WP903093","title":"WP903093","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
