Part Location Diagram of WP901403 Whirlpool Door Gasket - gray
See part 5 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Door Gasket - gray WP901403

 Fits your DU599B!
★★★★★
★★★★★
1 Review

Rated by 12 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 136.36
  On Order
Get FREE EconoShip on orders over $100! T&C apply
 Fits your DU599B!
PartSelect Number PS11746825
Manufacturer Part Number WP901403
Manufactured by Whirlpool
Product Description

Door Gasket - gray Specifications

This dishwasher door gasket is gray in color and is used for some belt driven dishwashers. This gasket is made of rubber and is eighty-nine and three quarter inches long.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Jenn-Air, Kenmore.
Part# WP901403 replaces these:
AP6013599, 7-57036, 757036, 9-1403, 901403, Y757036
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
4.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 12 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
Water Leak Lower Left, Bottom Of Door
Removed the old gasket. It was easy to "pop out" the parts that held the gasket in place with a regular flat blade screwdriver. Becareful not to chip the porclien (sp). Any of the tabs that broke off I just pushed them through and can take them out if I ever need to remove the front of the door. Works fine and no leaks. Clean the area of the old gasket so the new gasket will have a good seal. End of story.
  • Jerry from Mason City, IA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door gasket was leaking.
My daughter and son removed the old gasket and installed the new one. It went well.
  • Margaret from Westampton, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leake bottom left of washer
Removed the seal and replaced with new one. Job went very easy. Stop the leake. Thank you.

Claude Miller
  • Claude from malden, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gasket was leaking
Removed the gasket by pulling it's tabs out of the metal slots in the door. This was accomplished by accessing the inside of the door.
Then I realized that I had to dissassemble the side and front panel of the door to install the new gasket. The reason is you have to pull the tabs through the metal slots in the door from the front side. I used needle nose pliers which worked well. Then I had to reassemble the front and sides of the door. No more leaks!! for now. Takes some time if you do it by yourself. Budget at least 2 hours.
  • Mark from Bloomingdale, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
16 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water coming out of door bottom
Pull old gasket off (30 seconds), take panel screws out of front panel and control panel, carefully lower control panel push tabs thru holes from inside door, once all tabs in, push door closed and take pliers and pull tabs until they lock into place, put panel back together. not that difficult, my wife and I had it back in working order in approx 30min.
  • Danny from Barboursville, WV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door gasket cracked
Removed the front of the door by removing 2 screws in each side.

Remove 2 screws on each side holding control panel

Removed old gasket by pulling it out, and installed new gasket. Used needlenose pliers to pull tabs securely into slots.
  • Reavis from Asheville, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking around door
cleaned lime and calcium build up off of gasket
and it stopped the leak . yea . parts select was very helpful and said i could return the unused
gasket. . this is a good place to get parts.thanks larry
  • Larry from Auburndale, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher was leaking through the door.
All I had to do was take apart the door by removing a few screws. Then ripped the old gasket off. I then lined all the tabs up to make sure it was going to fit and then started pulling them through with needle nose pliers. When the door was reassembled I checked the plastic piece where the gasket ends in the tub and found some loose screws that needed to be tightened. After that I ran a few cycles and it does not leak any more.
  • Bradley from HEBER CITY, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original gasket was worn away
I opened the door and pulled the old gasket out using a flathead screwdriver to pry up the difficult to remove areas. I cleaned the area with a damp cloth and place the new gasket in the slots. The entire process including the cleaning took no more than 10 minutes. It was so easy. By the way, I had the part in my hands 2 days after ordering it. I am very impressed with the service.
  • Donna from Branchville, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the door gasket was leaking
Easy to change. Just pull firmly on old gasket, clean surface with soapy water. Align tabs on new gasket, push into place a tap firmly with handle of a screwdriver and taps pop into place. Was done in about 40 minutes.
  • Thomas from Beecher, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Louise
December 14, 2017
How do i install the gasket
For model number WP901403
PartSelect logo
Hi Louise, Thank you for your question. You would loosen the screws between your doors front panel and inner panel. That way it will be easier for your to remove the old gasket. Once you have that done, start from either bottom corner and slip the tabs between your panels. Then tighten the screws and you are good to go. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746825
Manufacturer Part Number: WP901403
Brand
Model Number
Description
Kenmore
19495
Dishwasher - Kenmore Dishwasher Model 19495(1988) Parts
Kenmore
19595
Dishwasher - Kenmore Dishwasher Model 19595(1988) Parts
Kenmore
19885
Dishwasher - Kenmore Dishwasher Model 19885(1988) Parts
Kenmore
19995
Dishwasher - Kenmore Dishwasher Model 19995(1988) Parts
Jenn-Air
DP450
Dishwasher
Jenn-Air
DP450-C
Dishwasher
Jenn-Air
DP451
Dishwasher
Jenn-Air
DP470
Dishwasher
Jenn-Air
DP471
Dishwasher
Jenn-Air
DP476
Dishwasher
Jenn-Air
DU401
Dishwasher
Jenn-Air
DU450
Dishwasher
Jenn-Air
DU450-C
Dishwasher
Jenn-Air
DU451
Dishwasher
Jenn-Air
DU470
Dishwasher
Jenn-Air
DU470-C
Dishwasher
Jenn-Air
DU471
Dishwasher
Jenn-Air
DU476
Dishwasher
Jenn-Air
DU486
Dishwasher
Jenn-Air
DU490
Dishwasher
Jenn-Air
DU490-C
Dishwasher
Jenn-Air
DU491
Dishwasher
Jenn-Air
DU496
Dishwasher
Jenn-Air
DU588
Dishwasher
Jenn-Air
DU588W
Dishwasher
Jenn-Air
DU598
Dishwasher - DISHWASHER
Jenn-Air
DU599B
Dishwasher
Jenn-Air
DU599W
Dishwasher
Maytag
EWU1005
Dishwasher
Maytag
EWU304
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service