The internal-bias thermistor (Thermistor, Dryer Thermister, Dryer Thermistor) prevents the dryer from overheating by monitoring and controlling the temperature of the inside of the dryer drum. It is located on the blower housing, next to the thermal fuse. If your thermistor is defective, drying time could be prolonged or you could get a fault code. You could also notice your dryer overheating. You can test the outlet thermistor on a multimeter, it should read 10Kohms (10,000 ohms) of resistance at room temperature. It can tolerate 10% fluctuation. If your reading indicates the part is defective, it will need to be replaced. This model is white plastic. It is sold individually.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Difficulty: Easy | Tools Required: Screw drivers,Socket set
Repair Tip: This part may look slightly different, but functions the same as original part.
Replacing your Whirlpool Dryer Thermostat, Internal-Bias
How to Troubleshoot a Dryer That Doesn't Heat Properly
Test If Your Electrical Part is Failing - Multimeter Tool
Troubleshooting
This part fixes the following symptoms:
Too hot | Not Heating | Won’t Start | Touchpad does not respond
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael B - August 1, 2024
Verified Purchase
Found out this wasn't our dryers problem
I'm sure that this will work when I need it but at this time it isn't needed because that wasn't the problem after all it was in the board of my controls. I had to do some soldering and it works just great again.
★★★★★
★★★★★
Eddie T - June 26, 2023
Verified Purchase
Worked as expected.
All parts were genuine and worked as they should.
★★★★★
★★★★★
Andrew S - May 6, 2023
Verified Purchase
Easy fix
I've had no problem with it
★★★★★
★★★★★
Jim R - August 4, 2022
Verified Purchase
Fast and easy to install
I ordered the part that i needed and it was exactly what I wanted and it took care of the problem. Thanks for your great support
★★★★★
★★★★★
Dennis W - July 13, 2022
Verified Purchase
Easy repair
The part worked great ??
★★★★★
★★★★★
Beth M - February 13, 2022
Verified Purchase
Worked perfectly
The part arrived quickly. Easy repair of our E1 error using a YouTube video. The problem is solved!
★★★★★
★★★★★
Michael R - January 10, 2022
Verified Purchase
Never installed it
Part got lost in the Fed-X mess before Christmas. Took nearly two weeks for the part to get to me, and by that time I had made other arrangements.
★★★★★
★★★★★
Delene A - October 12, 2021
Verified Purchase
Internal thermostat
As always great results from Parts Select!!
★★★★★
★★★★★
Walter J - April 4, 2021
Verified Purchase
It worked
It’s exactly what I needed and they made tracking the part easy and it works.
★★★★★
★★★★★
Stephen W - April 1, 2021
Verified Purchase
Fixed the perfect fit
The only problem I had was with the shipping company because they left it to get rained on and blow away on a windy rainy day. I found the package soaked in my neighbors garden. The part was well sealed and worked just like it should though
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 30 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer drum would not turn
Ordered $245 worth of parts for four possible fixes. None of the four fixes worked. Used an appliance repair person to do more troubleshooting. Fourteen days later and after spending an additional $380 ($625 total), a new control panel was installed. That solved the problem.
Start button failed to keep dryer running; no heat
Dryer is still in pieces after two weeks, dependent upon my time and ability to work on the project. I usually dry my clothes on an outside line, anyway. I especially appreciate Steve's videos demonstrating step-by-step procedures for disassembly, part installation, and reassembly. Very thorough. I timed each presentation---five minut
... Read morees for one, less than ten for the other. I watched the videos several times and took notes, so I would have the procedures in front of me while working on the unit at the other end of the house, I'm 77, forgetful. When I disassembled my unit, I noticed several rusted areas, so decided not to complete the project until I could get to the store for paint. As a primary care-giver for a severely dementiated 79-year Old Lady, I have to arrange for a relief to go shopping. That's why the machine is still in pieces. Got the paint, though, so back to work---eventually. When I disassembled the dryer, tucked away in the bottom was a very informative TECH SHEET, the discovery of which ticked me off that it wasn't provided with the owner's manual. At the bottom it says, "For Service Technicians' Use Only." In my house, I'm the "...Service Technician...," chief cook and bottle washer, launderer and litter box attendant.
Gas burner would heat for six or seven minutes, then shut down, and not cycle on again.
Unplugged electric power, removed lower front panel, removed fan unit cover. Was able to easily reach and test the disposable thermal fuse ok; m-coils ok but replaced; tested internal bias thermostat bad, replaced. Put fan unit cover on. Plugged dryer in to test and repair was successful. Did not install new igniter, flame sensor, or th
... Read moreermal cutoff fuse kit at this time but will keep for future if necessary. Parts.Select online help made it easy for me to do this repair. I bought all possible parts $170 w. ship given the dryer age. Three day delivery Denver to Phila. Before attempting to repair, called Kenmore service and. Was told one month before tech was available, unacceptable. Went to several appliance stores to buy new and found earliest available delivery would be 1 - 3 months! So went online to attempt repair. Found Parts Select which had numerous examples of exact problem and identified likely defective parts. So we avoided spending $1600 on a new dryer. The three installed parts were about $60! Highly recommend Parts Select.
Went to Kenmore website, got parts diagram, watched You Tube videos on dryer repair for this model, ordered parts. When parts arrived (in 4 days, great job!), re-watched You Tube videos, installed parts, dryer works great. Took longer than industry standards because I had to suction out/vacuum a great deal of lint/hair. as I went along.
Shutting off and had to wait before could turn back on
Followed online video very easy and dryer works like new one....
Allen from KENNETT, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would run 1 min then stop running with some heat in drum
Videos are excellent to open and access internal parts. It turned out a rat was killed in the blower fan when we first encountered the problem. This prevented the blower from turning which interfered with motor function.
This required removing drum & belt, disconnecting motor clips, blower belt, and blower housing. The blower
... Read morehousing needed to be disassembled. Having a 5/16” & 1/8” ratcheting nut driver makes this process much easier. Don’t try this with a wrench.
After getting rid of the rat and decomposition, we sanitized the entire housing with soap & chlorine bleach.
Reassembly was uneventful and relatively easy. We ended up replacing 4 rollers, 2 belts (drum belt & blower belt), the thermistor which was damaged as a result of the blocked blower.
Message indicated something amiss in the motor circuit. Followed Instructions in the on-board manual. Turned out to be the internal-bias thermostat, and the exhaust air thermistor both. Changed faulty parts, cleaned lint from the system and we are off and running again. Thank You. DW Pranger
DW from ALVIN, TX
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer won't start
Started by using the parts select troubleshooting guide. Didn't think that the drive belt could possibly be broken as the dryer wouldn't start. The non turning drum caused the "thermistor" to blow.
This repair looks intimidating but really is very easy.
Ask our experts a question about this part and we'll get back to you as soon as possible!
123 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Grace
November 25, 2017
Our dryer won't heat. We think it might be part 42 that is the issue, since every thing else is normal. What should the resistance be on the internal bias thermostat? We have 11.4 kilohms.
For model number MEDX500XW0
Hi Grace,
Thank you for your inquiry. The reading for the internal bias thermostat should read zero. If it is not zero then you will have to replace the thermostat. I hope this helps. Thank you and have a great day!
31 people found this helpful.
Was this helpful?
Thank you for voting!
CARL
January 5, 2018
When i push start button on my dryer it does not start but it beeps and says "sensing" got a diagnosis and fix for this?
For model number WED6400SB0
Hello Carl, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: thermal cut out kit, internal bias thermostat, heating element, and main control board. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
25 people found this helpful.
Was this helpful?
Thank you for voting!
John
October 2, 2017
Have replaced thermal fuse-thermostat- and thermal cutoff.Checked vent lines.Moving ton of air.Does one load-clothes come out extremely hot and thermal fuse is out again.Any ideas?Thanks
For model number WED8300sw1
Hi John, Thank you for the question, I recommend replacing the Internal-Bias Thermostat,PartSelect Number PS11746740. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating. Hope this helps!
24 people found this helpful.
Was this helpful?
Thank you for voting!
Shaun
September 29, 2017
My dryer has no heat, I have replaced the heating element and the thermal fuse, what else can I check or replace to fix the no heat problem?Everything else on the dryer works fine.
For model number WED7300XW0
Hi Shaun, Thank you for the question, I would recommend replacing the Internal-Bias Thermostat, PartSelect Number PS11746740.This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.When defective you may not have heat inside the drum. Hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Todd
December 31, 2017
My dryer has no heat at all. What would you replace first? Heating element or thermal fuse...
For model number WDE9500TW3
Hello Todd, Thank you for your inquiry. I would try replacing both the thermal fuse and high limit thermostat first. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Ann-Marie
November 11, 2017
When your dryer won't start, how do you test to determine which part you need?
For model number MED6400TBO
Hi Ann-Marie,
Thank you for your inquiry. To verify what part is causing the issue, you will need to use a multimeter to check the continuity of each part. If you need help using one, there are videos on YouTube that you may reference. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
JOHN
August 1, 2018
What should my ohm meter read when checking this part
For model number CED9050AW0
Hello John, thank you for your question. The bias thermostat should read around 10,000 ohms at room temperature. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Rick
December 6, 2017
I have a Maytag dryer model mgdx600xw0, i have no heat. I replaced the igniter assembly and sensor pt# wp338906. I still have no heat. Can you help me?
For model number MGDX600XW0
Hi Rick, Thank you for the question.Sounds like the 'M' Series New Style Coil Kit, PartSelect Number PS334310 needs to be replaced.When the igniter reaches a high enough temperature, these coils work together to let the gas enter the dryer. The coils open the gas valve; if the valve does not open the heating element will not ignite. Hope this helps!
Timing is off will dry for 10 min then jump to 48 min does not turn off
For model number Wed6600vwd
Hi Joan, Thank you for the question. This sounds like an issue with the control board, PartSelect Number: PS11748076. The timer is built into the board so the board will need to be replaced. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Art
August 16, 2017
Hello, with the timer set on towels the unit has started to add time to this default setting. Other settings the timer works correctly. Thank you
For model number WED7600XW0
Hi Art,
Thank you for your inquiry. That is a fairly tricky issue unfortunately. I would suggest testing your control board, this part, and your sensor as well. It could be that any one of these parts is causing that issue. I have listed those parts in two links below for you. If you find that they are all working fine, you might have to contact a repair technician to come and service your appliance. Good luck with your repair.
