The timer (60 Hz) controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
Part# WP8572976 replaces these:
AP6013450, 8572976
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
5.0
Filter By Rating:
5 Stars
4
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Roland B - November 7, 2018
Verified Purchase
Timer replacement
Replacement part was a perfect match for my wash machine worked out excellent tell me was about total of 35 minutes taking out the old one and replacing the new one thanks for the part
★★★★★
★★★★★
Brenda O - June 25, 2019
Verified Purchase
Easy installation
The part was a perfect fit for my washer and a very very easy installation. There were You Tube videos available to help.
★★★★★
★★★★★
Adele V - March 23, 2019
Verified Purchase
Took less than 15 minutes to install
Part received in a timely manner and packaged very well. Happy to have my washer working again!!
★★★★★
★★★★★
James W - March 11, 2019
Verified Purchase
Working after a few weeks of install. Time will tell.
Working after a few weeks of install. Time will tell.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
timer stopped working
removed 2 screws from back panel screwed in washer then to the top 2 out screws from the back of panel on the top pick up panel to remove set the face down on washer of then pulled black plastic stick out to remove timer knob then take out small screw from the front timer to remove timer from back side right or left to remove an d replac
... Read moree should only be 5 screw to take out not bad at all my 1st replace
Read less
roland from OAK CREEK, WI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My machine wouldn't run.
Actually, my brother-in-law did the repair. He replaced the part, but found out that it was another part that was the problem. We kept the part because he told us that this part would be the next thing to go, so we just kept it. Now, we ordered and fixed the correct part and it works great.
Ashley from Breaux Bridge, LA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
13 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer was bad
i took out my timer an called your place an you responed within two days of the time i placed the order an it fit right back in an the repklacement part was very good my waser is up an running because of your quick reponse i am very pleased with your service it was very good i will use you for any other of my repairs that i can get from y
... Read moreou thank you truman r davis
Read less
Truman from round lake beach, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
20 of 26 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer would not run
First, I removed the two screws that hold the back-top in place. I removed the top to get to the control timer. I replaced the control timer with a new part and replaced the lid switch (which I broke removing the old one). Put it all back together and still nothing. I removed the two spring U clamps at the top back that hold the enti
... Read morere casing in place. I removed the casing. I checked out the wires leading to the motor and the white wire showed signs of a burn. When touching this wire it broke off. I used a pigtale from the connector to the old wire, soldered it in place and put it all back together AND, WOW, LUCKY ME it has been working since. The parts I ordered on Monday, came to my house the next day and I did not pay for additonal shipping. I returned the timer and the $ was credited to my account in about one week. Partsselect is about the best experience I have had on the internet.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dominic
November 28, 2017
Need visual info on how to install
For model number 11028432700
Hi Dominic,
Thank you for your question. We do not have a video specifically for your appliance, however here is a video that should help you out: https://youtu.be/MbM3XM_iXdM . Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Julia
October 7, 2021
When set knob on spin it does nothing. Works if set it on beginning of wash cycle, but not just to spin
For model number 11024922200
Hello Julia, Thank you for the Question. This is normally an indication the Timer Switch, PartSelect Number PS11742098 is defective and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
My machine is doing these things intermittently but it never gets through a full wash load without one or more of these things happening:
1. Pauses after wash cycle for 45 sec. before starting to drain.
2. Pauses during the draining of wash water for 5 sec. then begins again.
3. Pauses after the rinse cycle for 90 sec. starts draining then quits and starts again.
4. Skips final spin cycle. There is no longer cold water running on either spin cycle.
I had a repairman out, told him I thought it was the timer, he said it was a connection issue. Bottom line, washer still isn't running right.
For model number 23832100
Hi Debra, thank you for reaching out. Make sure your water inlet valve is not clogged and water flow is not restricted. Also, check the drain hose and drain pump for clogs and make sure water is draining properly, and the door is getting close properly and there is no obstruction. If all checks are fine, you will need to replace the timer, part number PS11743432. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ed
July 30, 2022
I need a Timer for a Whirlpool Washing Machine but I don't know the model number of the Washing Machine. Where is the model number located?
For model number Whirlpool Washer
Hello Ed, thank you for your question. The model number for your oven will be on the inside of the oven drawer or on the rim of the door. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Ryan
November 30, 2022
Hi, my washer fills and then runs on agitate and never goes past that point. I will literally run all night in that position. Would replacing the timer fix this?
For model number Whirlpool 8525079
Hello Ryan, thank you for contacting us. The most probable cause of the described issue is a faulty timer. When the timer is defective the washer will not advance to the next cycle. We would recommend checking the timer and electronic control board with a multimeter to pinpoint the fault. We hope this information helps!
Was this helpful?
Thank you for voting!
Robert
June 26, 2022
washer will not start there is power to the timer
For model number WTW5100VQ2
Hello Robert, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the washer lid switch, the direct drive motor coupling, the motor start capacitor, the direct drive motor, and the main drive motor switch. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
