Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Walter B - June 24, 2018
Verified Purchase
Great part
The part arrived on time fits perfectly
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
drive shaft leaking
Washer was leaking -- in part from hoses that had loosened over time due to unbalanced loads and age, and partly from a worn pump -- and not agitating/spinning properly. Fixed hoses, replaced pump and clutch. Unfortunately, when I pulled apart direct drive to replace clutch, the drive shaft started leaking because old seals worn and comp
... Read moreromised on disassembly. Have to give credit where due -- YouTube invaluable here -- pulled and disassembled drive shaft, removed old seals, replaced and reassembled. Time consuming, but if you keep track of where things go, not too bad. 3 things I wish I knew in advance: (1) for an old washer you definitely need a spanner nut wrench (like 15-25 bucks online) to remove the spanner nut so you can pull the basket and get to the seals -- no wrench/pliers/vise substitute will do the trick; (2) the shaft seals have metal washers inside the rubber/plastic -- when you're removing the old seals, you might need to chisel (hammer and small flat head screwdriver) the old seals out instead of just pulling out the corroded rubber which will leave the old metal behind; (3) if your time is valuable, try to diagnose all the likely sources of your problem and buy the parts to repair at once rather than doing piecemeal like me. Took me 2 weeks and two complete tear downs to finish a repair that should have taken me an afternoon. I love my local Appliance Parts guy -- he's knowledgeable and usu. has what I need or can get it fast and I like supporting local brick and mortar -- but if time is important to you, taking advantage of online companies that allow you to return what you don't use may save you time.
My unit is 12 years old and this is the first issue I have had with it "Whirlpool washing machine". Repair was very easy and simple. The only problem I ran into was the agitator bolt head had came into contact with water. The head had rusted and crumbled witch made the repair take longer than normal. I had my daughter time the reasse
... Read morembly witch took 8 minutes. I strongly suggest using name brand parts over aftermarket, wither you get them from PartSelect or elsewhere I don't care. Try the repair yourself, you can do it.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Terri
November 18, 2017
The top part of the agitator keeps coming off when I do laundry.I think the clip broke because it just sits on top of the main agitator but when the machine starts to agitate, it falls off because there is nothing holding it on.Thank you
For model number 11025842400
Hi Terri, Thank you for the question. I suggest replacing the top of the agitator, Part Number: PS11742007. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
November 28, 2018
Hi, I'm in Australia and understand if you can't send parts to me. But i have been trying to fix my machine with "agitator not spinning". I have narrowed it down to the gearbox and already have a replacement. But this washer (wp8543666) from my machine is missing one of its "spikes" which must have broken off at some stage. Does it affect the agitator motion if i put this washer back in and the spike back down into the drive block hole? Do i need to buy another washer? Hope you can help, your website has already been great. Thanks and kind regards, mark
For model number 6LSC8255EQ0
Hello Mark, Thank you for the question and happy we have been able to help you with the repair. We do suggest having the washer replaced if it is damaged as it can effect the agitation. Thank you for your inquiry, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
