Install videos!
11746258-1-M-Whirlpool-WP8540101-Drive Belt
Part Location Diagram of WP8540101 Whirlpool Drive Belt
See part 3 in the diagram
Replacing your Whirlpool Washer Drive Belt
11746258-1-S-Whirlpool-WP8540101-Drive Belt 360 view
( Grid squares measure 1x1 inch )
11746258-1-S-Whirlpool-WP8540101-Drive Belt 11746258-1-S-Whirlpool-WP8540101-Drive Belt 360 view
Part Location Diagram of WP8540101 Whirlpool Drive Belt Replacing your Whirlpool Washer Drive Belt
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Drive Belt WP8540101

 Fits your NFW7300WW00!
★★★★★
★★★★★
13 Reviews

Rated by 5 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 44.28
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your NFW7300WW00!
PartSelect Number PS11746258
Manufacturer Part Number WP8540101
Manufactured by Whirlpool
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Product Description

Drive Belt Specifications

This part is the replacement drive belt for your washer. It is made of black rubber and is approximately ½ an inch wide and 48 inches long. It has 6 grooves and is sold individually. The drive belt is found between the motor pulley and the drive pulley, and it connects the motor to the drive system. When the belt is running, it allows the basket or tub to spin. If the belt is stretched, worn, or broken, the tub will not turn. A warped belt can also cause the washer to be noisy while operating. This part is an authentic OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not agitate | Spins slowly | Burning smell
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Kenmore, Inglis, Amana.
Part# WP8540101 replaces these:
AP6013037, 8540101, 8540348
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Liseanne
August 1, 2019
My washer works fine until it is on the spin cycle. It is very loud when it is spinning, but only on the spin cycle. Is there a bearing on the tub that could be making the noise?
For model number IFW7300WW01
PartSelect logo
Hi Liseanne, Thank you for your question. The bearings are part of the outer tub. If the issue is the bearings, the outer tub, part number W11239040 , has been discontinued by Whirlpool and you will need to contact them for information on a replacement part. Their telephone number is 1-866-698-2538. If they provide you with a part number for the replacement part, you may call us back with it and we can verify if we have it available for you. You may also be able to locate the part you need by trying the following: Using a search engine to type your part number and see if other retailers still have this part in stock. Visiting online stores such as eBay and finding sellers that have this part. Trying retailers and repair stores in your local area to see if they have the part in their inventory. Talking to a local repair technician, who may have the part you need, or may be able to repair your existing part. If it is not the bearings causing this issue, you should check the drain pump, the drive belt, the shock absorbers, the tub baffle and the counter weight. I hope this helps. Thank you and have a great day!

11 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
Part Videos

Replacing your Whirlpool Washer Drive Belt

Replacing your Whirlpool Washer Drive Belt
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.7 / 5.0, 5 reviews. What's this?
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
It didn't seem like the drum was spinning fast enough when washing a full load to wring all the water out of the clothes
I basically just followed the directions in the Parts Select video. The only thing that was a little difficult was getting the new belt to feed onto the drum pulley, but after a couple of tries I was able to get it on. I'm glad the video mentioned this might be a little difficult or I might have thought I was doing something wrong.
  • David from Agawam, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drive belt replacement
I never did the repair because Partselect.com shipped the wrong part. Then they charged me a 2nd time to resend the correct part plus the fees for shipping the correct part overnight which I did not get it until 2 days later. Now I shipped both parts back & have to wait for a refund.
I will never order from them again!
  • Timothy from PAINESVILLE, OH
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor bear bearings failed, making a very load screechy sound.
Turned off water unplugged washer removed screws a lot of them.
Removed lower back brace. removed belt. 1 bolt holding motor on removed. disconnected ground wires and motor plug.
wiggled motor out wiggled new one in put belt on and the many screws on the back on turned water back on, plug in and it work like a washer .
Other Parts Used:
Drive Motor
  • Bruce from EUREKA, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer belt stretched from years of use and walked off pulleys
I pulled the washer away from the wall to comfortably access the back panel. I then removed about a dozen 1/4 drive screws. I had to remove all the screws in the panel and the screws and cross brace directly behind the drum in order to install the new belt. Note: it will seem like the belt is too small when in reality it is perfect. There is no type of adjustments or tensioners that I found so you need to place the belt on the motor pulley correctly and then walk the belt on the drum pulley. Make sure the belt is lined up with the marks on the drum pulley that the original belt had left. You may need to attempt to walk the belt on 2 or 3 times before it finally goes on. If you have any mechanical knowledge you will find this to be a gravy job.
  • Michael from PHOENIXVILLE, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad drum belt
Our whirlpool washer drum wasn't turning and there was a thunking noise from the machine when the drum should have been rotating.

I opened the top and back of the washer using a ratchet wrench. There were 4 screws holding on the top (at the top rear of the machine) and about 12 or more holding on the back panel. Removing these I could see the belt had become frayed, had come off of the drum, and was bunched around the motor drive wheel. The old belt was still usable, but clearly not going to last much longer so I purchased a new belt. The new belt was tighter than the old belt (which is good) and so took a fair amount of effort to get back onto the drum. I had to hold in place while turning the drum, something hard to do because of the braces on the back of the washer get in your way. But, I eventually got the belt propery seated. I then replaced the back and top panels. All appears to be working as it should.
  • Keith from Austin, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
82 of 105 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
13 Reviews
4.7
Filter By Rating:
  • 5 Stars
    12
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
  • 1
  • 2
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
J MARGARET M - October 22, 2022
  Verified Purchase
Delighted with dryer belt
Received new, perfectly-sized, apparently-strong, black dryer belt in undamaged mailer pouch- or maybe it was a box. It is most splendid. I selected this one because it was manufacturer certified. It has been performing as expected and will probably last longer than the dryer! Thanks.
★★★★★
★★★★★
Gursharan T - March 26, 2022
  Verified Purchase
Fixed the Issue
Our old washer belt was so loose that it was hard to believe that this was the right part. However, I bought this after verifying the part number so I knew it had to be the right part. After watching the installation video on the PartSelect website and using some strength, we were able to get the new belt on the washer and now it works like new!! Will definitely buy more parts in the future from this website!
★★★★★
★★★★★
Teresa H - November 6, 2021
  Verified Purchase
Easy Drive Belt Repair/front load washer
The new part went on as shown in the helpful video.
★★★★★
★★★★★
Brenda W - June 24, 2021
  Verified Purchase
Easy repair
My washer was repaired in just a few minutes.
★★★★★
★★★★★
Juan L - May 26, 2020
  Verified Purchase
Quality part!!!
Fast shipping and boxed just right. Had my washer running in no time. Repeat customer!!!
★★★★★
★★★★★
Warren N - March 19, 2020
  Verified Purchase
Drive Belt for front load washer
Perfect part and it fit as it should. Delivery was 3 days so the laundry was not piling up for too long. The belt as described in the information stated what machines it would fit and that really helped to narrow down the part.
★★★★★
★★★★★
Teresa H - June 12, 2019
  Verified Purchase
Easy fix
Received before expected. Second time ordering. Would order again.
★★★★★
★★★★★
Jackie B - June 1, 2019
  Verified Purchase
Easy repair Part was great - worked great
The part was a perfect fit! Fast delivery Got my Whirlpool Front load up and running in no time and it spins like a new washer!
★★★★★
★★★★★
Jennifer K - March 14, 2019
  Verified Purchase
Easiest repair
This belt fit perfectly and the repair was by far the easiest I have done!
★★★★★
★★★★★
Deborah P - October 29, 2018
  Verified Purchase
Drum belt
Parts Select has been great to deal with! The repair videos are always a great help! My washer was up and running in no time!
  • 1
  • 2
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746258
Manufacturer Part Number: WP8540101
Brand
Model Number
Description
Kenmore
11046462500
Washer
Kenmore
11046462501
Washer
Kenmore
11046472500
Washer
Kenmore
11046472501
Washer
Kenmore
11047511700
Washer
Kenmore
11047511701
Washer
Kenmore
11047511702
Washer
Kenmore
11047512600
Washer
Kenmore
11047512601
Washer
Kenmore
11047512602
Washer
Kenmore
11047512603
Washer
Kenmore
11047512604
Washer
Kenmore
11047512605
Washer
Kenmore
11047531700
Washer
Kenmore
11047531701
Washer
Kenmore
11047531702
Washer
Kenmore
11047532600
Washer
Kenmore
11047532601
Washer
Kenmore
11047532602
Washer
Kenmore
11047532603
Washer
Kenmore
11047532604
Washer
Kenmore
11047532605
Washer
Kenmore
11047542600
Washer
Kenmore
11047542601
Washer
Kenmore
11047542602
Washer
Kenmore
11047542603
Washer
Kenmore
11047542604
Washer
Kenmore
11047542605
Washer
Kenmore
11047561600
Washer
Kenmore
11047561601
Washer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service
Drive Belt
$ 44.28
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.

Close