Quick Question!

Have you ever purchased from PartSelect.com before?

11746245-1-S-Whirlpool-WP8539324-Upper Spray Arm Mount
11746245-1-S-Whirlpool-WP8539324-Upper Spray Arm Mount 11746245-2-S-Whirlpool-WP8539324-Upper Spray Arm Mount 11746245-3-S-Whirlpool-WP8539324-Upper Spray Arm Mount https://www.partselect.com/Schematics/Whirlpool/I3UBBVVU.gif

Upper Spray Arm Mount

Your Price

$6.44
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11746245
Manufacturer Part Number WP8539324
Manufactured by Whirlpool

**Please note: This is a redesigned part. The top mounting clip and screw are no longer needed.

This part works with the following brands: Kenmore, KitchenAid, Whirlpool, Inglis.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Noisy.
  • Door won’t close.
  • Will not fill with water.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 98 reviews What's this?
 

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Dennis from Yorktown, VA

Spray arm mount broken and supply tube cracked

First, I compared the parts visually. The mount is a slightly different design. I removed the old mount/spray arm and tube by removing the single screw through the upper mount and un-clipping the rear tube mount. Next I assembled the new parts using the old spray arm as a guide. Note: Installing the new screw for the spray arm into the new mount proved very difficult and I needed to enlarge the pilot hole slightly in order to assemble. I proceeded to attach the new mount to the upper rack and installing the rear tube mount. The new design of the mount eliminated the need for the upper mount and even if I wanted to install it, it will not fit the new design. Overall, an easy repair with a couple of hiccups.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Tracy from Haskell, NJ

The mount broke off in the upperdish rack wash assembly

I took the whole upper dish rack wash assembly apart removed the piece of broken mount and replaced with a new mount. screwed everything back together and added the Water Inlet Tube Holder that I had been missing previously. That is probably what caused the mount to wear in the first place. Anyway easy fix and good as new working beautifly!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Kevin from Olathe, KS

The upper wash arm fell off in my hand, I went to internet order part in 15 mins. And had it next day.

Installed mount to upper wash arm in 2 mins. and it worked perfect I wish everything was that easy !

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Melvin from Georgetown, TX

Mount was broken.

I removed the two screws that held the old mound in place and installed the new mount, which required only one of the screws I removed. Simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Parviz from Sterling, VA

Mount broken

Just snap the new part on after mounting the spray arm on the mount with the screw driver. Mount needs to be mounted in properly or the spray arm will not spin.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jim from Modesto, CA

Top spray washer axle assembly broke

I took out the screw holding the broken part, then I screwed in the new pivot/axle assemble and snapped it into the top rack. Super Easy!!! The items in the top rack get real clean now!

Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Customer: John from Crownsville, MD

Clips were broken and very easy to replace

I pulled the top tray out by unhooking the end clips. Replacing the broken clips that hold the swivel racks was a breeze The top spray arm was replaced with two screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Susan from Sims, NC

Upper spray arm mounting bracket broke

Doing the repair was quite simple. I just put the new part back where the broken one was (I did take a photo of the parts to make sure I did it correctly) and screwed it in place.

The screws were not easy to tighten by hand, partially because of where the part is located and partially because I don't have much hand strength. Once I got my husband's drill with the screwdriver attachment, the job was done in a flash.

I may have stripped out the screws a bit, but I won't know for sure unless the part breaks again. This was much better than paying someone $75 plus part fees to come to the house!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Geri from Tampa, FL

The spray arm broke

I removed the broken part, went on your website, easily identified the need parts, order the parts, received them in four days ( a weekend was involved) and within about ten minutes of receiving the parts the dishwasher was fixed. We saved ourselves a repair visit and about $150.00. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Salvina from Winter Springs, FL

Replaced parts (dishes weren't coming clean)

I played the video, and used the step by step instructions. I am considered a "girly girl" and was overwhelmingly proud that I, alone, was able to change the parts, as well as, save a bunch of money by doing this myself! Thank you Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: BETTY from PETALUMA, CA

The spray tube below the arm was all torn up

once I figured out the instructions it went really well.I was most amazed that I received part the next day! That was very fast. I will know where to go next time I need a part. I saved some money and your service is great. Also the vidio instructions are great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Michael from Provincetown, MA

Leaky door and broken spray arm

Removed the old door gasket and gently pushed the new one in place in less than 5 mins .The new one fit perfectly, and.......No leaks !
The cracked upper spray arm assebly also was disassembled in 5 mins, and quickly replaced without any problems...All parts fit and worked great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Jim from Cincinnati, OH

Upper arm spindle broke off

Very easy, just unscrewed the nuts reattached new part and snapped into place on the upper rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Joann from Uxbridge, MA

Orignal mount broke

removed the old mounting bracket and instlled the new one. I was very please with the speed in which this part arrived. I added this website to my favorites!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ken from Appleton, WI

Upper spray arm broke off

Took the model number off the arm and entered in. It brought up the new part number. I didn't realize the bracket was also broken so I had to place 2 orders. Once I rec'd it took me about 5 minutes and I didn't have to ask my husband to do it. The You Tube video showed me exactly what I needed to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11746245
Manufacturer Part Number: WP8539324
Brand Model Number Description
Kenmore110773811Dishwasher
Kenmore110773812Dishwasher
Kenmore110773813Dishwasher
Kenmore110773881Dishwasher
Kenmore110773882Dishwasher
Kenmore110773883Dishwasher
Kenmore66515622000Dishwasher
Kenmore66515624000Dishwasher
Kenmore66515627000Dishwasher
Kenmore66515629000Dishwasher
Kenmore66515632000Dishwasher
Kenmore66515634000Dishwasher
Kenmore66515637000Dishwasher
Kenmore66515639000Dishwasher
Kenmore66515652000Dishwasher
Kenmore66515654000Dishwasher
Kenmore66515659000Dishwasher
Kenmore66515682000Dishwasher
Kenmore66515684000Dishwasher
Kenmore66515689000Dishwasher
Kenmore66515701890Dishwasher
Kenmore66515701891Dishwasher
Kenmore66515701892Dishwasher
Kenmore66515702990Dishwasher
Kenmore66515705890Dishwasher
Kenmore66515705891Dishwasher
Kenmore66515705892Dishwasher
Kenmore66515707990Dishwasher
Kenmore66515708890Dishwasher
Kenmore66515708891Dishwasher