Maytag/Maytag_Thumb/4Y9PGRQW.gif
See part 18 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

D-Shaped Knob Insert

★★★★★
★★★★★
1 Review
$ 5.67   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11746209
Manufacturer Part Number WP8536939
Manufactured by Whirlpool
Product Description

D-Shaped Knob Insert Specifications

This insert is sold individually. Knob not included. Knob is sold separately.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Timer will not advance | Will not fill with water
This part works with the following products:
Dryer, Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, Maytag, Amana.
Part# WP8536939 replaces these:
AP6012988, 8536939
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

31 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerica
November 5, 2017
I washed a load of clothes and the washer worked fine. A day later I went to wash a load and noticed the Green light was off. When I put the clothes in and start the cycle the washer just wont do anything. What do you think the problem might be?
For model number WTW5000DW1
Hi Jerica, Thank you for the question. You may need to reset the washer. To Reset the appliance you will need to follow these steps.Turn the washer off.Set the mode selector dial to Normal.Turn the dial counter clockwise 1 click , clockwise 3 clicks, counter clockwise 1 click then clockwise 1 click. Now press the start button. All the cycle indicating lights should be illuminated. Press the Start Stop button once. Rotate the dial until Rinse, Wash, and Stop light illuminate. Turn the washer off and unplug it for 10 seconds. Finally, turn on the washer and it should now be reset. Run a test load empty to be sure the reset worked. If not perform the reset procedure one more time.Hope this helps!

13 people found this helpful.

Was this helpful?
Thank you for voting!
Roy
February 13, 2018
I need the "d" shaped part that is for water level control. Mine broke. Can i drill out the old part left in the control?
For model number RTW4440VQ2
Hi Roy, Thank you for your question. If you are referring to the d-shaped shaft that the knob fits onto, that is part of the water level switch. The part number listed under your model number for the water level switch is PS11750715. If you are referring to the d-shaped insert, the part number listed under your model number for the clip is PS11746209. I hope this helps. Thank you and have a great day!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Karen
April 26, 2019
When i press the start button the washer only flashes locked. I've unplugged it, recalibrated it several times and it will not stop flashing. All of the lights work so it's not the mother board but i don't know what else it could be.
For model number WTW5000DWI
Hello Karen, thank you for your question. If the lock light is flashing but the door is not locking the lid lock itself should be replaced. That is PartSelect Number PS12704713. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Harvey
January 10, 2019
Washer don't seem to fill enough water to get clothes clean. What my problem
For model number kenmore 11026002011
Hello Harvey, thank you for your question. When washing machines don't fill with enough water there are a few parts you will want to check. The water pressure tube that runs down the side of the tub from the control panel, as well as the water inlet valve. The pressure tube, if bent or ripped, will cause the washer to not fill to the desired level. If the water valve may no be opening up enough to allow enough water into the unit. If the tube, and valve are working fine, the issue would be with the electronic control board. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Carole
October 1, 2017
The wash levels knob will not turn. Seems stripped. Is the D shaped knob insert the answer to this.? What knob replaces my old one. What is the part number for the knob?
For model number WTW5550SQ0
Hi Carole, Thank you for the question, If you enter the part number and click on the 4th Diagram labeled "Controls and Rear Panel Parts" The knob you need is item #47 and comes with the clip. The part number will depend on the color knob you need. The clip on its own is item #46,Part Number: PS11746209. If you remove the knob and see if you can manually turn the shaft that comes from the back of the panel with a pair of pliers, and it moves normally then the clip or knob will need to be replaced. If the shaft does not turn then the switch will need to be replaced, PartSelect Number PS3408119. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
David
May 30, 2019
Washer does not fill to go through cycle, when it does fill it drains right out then it stops
For model number ntw4516fw1
Hello David, thank you for inquiring. For this symptom you will want to consider either the Water Inlet Valve part PS12349267, or the Drain Hose part PS12578897. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Chris
January 16, 2018
The water level knob on the far left was snapped off while moving. I believe the switch is ok, knob is fine. The plastic d-shaped shaft from knob to switch in back broke off. Can just the shaft be replaced easily to correct issue?
For model number WTW5540SQ0
Hello Chris, Thanks for your question. The red shaft is included as part of the water level pressure switch itself, part number PS3408149. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Earlston
August 6, 2018
Continous sensing (clicking relay-like sound} even when washer not engaged or being used. Washing became unpredictable, sometimes the washing cycle complete and the very next load, it fail to passes the filling stage. I replaced the motherboard and clicking of the sensing relay continued
For model number 11022352510
Hello Earlston, thank you for your question. If the unit is sitting in "sensing" mode you will want to check the water pressure switch and tube, the water valve, lid lock and actuator assembly that sits under the tub by the gearcase. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Charles
November 11, 2017
The knob does not turn the timer , i can turn the timer by hand and it works but now wont turn it what do i need ?
For model number MVWC300VW1
Hi Charles, Thank you for your question. You will have to check your parts. The problem could either be with your knob or dial. When you inspect them you will be able to see if they are broken or not. If those parts look fine, it may be your actual timer that is broken. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Matt
November 22, 2017
Washer washes clothes. Then the wash light blinks. It doesn't compete the wash. I have to hold the start button down to shut the wash down. I then change it to drain and spin and press start. , this completes the wash.
For model number WTW4815EW1
Hi Matt, Thank you for your question. I would suggest taking a look at some of the physical parts that turn your drum. It seems like they may be wearing down. The first part I would have you check is your belt. You should also take a look at your clutch assembly and your drive block. It could be that your door latch is also starting to fail as well. I would suggest testing that part with a multi meter to be sure. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
1.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11746209
      Manufacturer Part Number: WP8536939
      Brand
      Model Number
      Description
      Kenmore
      11015942400
      Washer
      Kenmore
      11015942401
      Washer
      Kenmore
      11015944400
      Washer
      Kenmore
      11015944401
      Washer
      Kenmore
      11015952400
      Washer
      Kenmore
      11015952401
      Washer
      Kenmore
      11015954400
      Washer
      Kenmore
      11015954401
      Washer
      Kenmore
      11015962400
      Washer
      Kenmore
      11015962401
      Washer
      Kenmore
      11015964400
      Washer
      Kenmore
      11015964401
      Washer
      Kenmore
      11016212500
      Washer
      Kenmore
      11016212501
      Washer
      Kenmore
      11016212502
      Washer
      Kenmore
      11016212503
      Washer
      Kenmore
      11016732500
      Washer
      Kenmore
      11016812500
      Washer
      Kenmore
      11016812501
      Washer
      Kenmore
      11016812502
      Washer
      Kenmore
      11016812503
      Washer
      Kenmore
      11016852500
      Washer
      Kenmore
      11016852501
      Washer
      Kenmore
      11016852502
      Washer
      Kenmore
      11016852503
      Washer
      Kenmore
      11016862500
      Washer
      Kenmore
      11016862501
      Washer
      Kenmore
      11016862502
      Washer
      Kenmore
      11016862503
      Washer
      Kenmore
      11016882500
      Washer

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service