Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve will open and close according to the desired amount of water needed.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gary W - June 7, 2018
Verified Purchase
The video made it easy to work on the dishwasher.
water inlet valve was purchase and it was identical to original valve on dishwasher.
★★★★★
★★★★★
Jerry S - March 20, 2018
Verified Purchase
Eezy Breezy
Water was entering dishwasher slowly when machine was not running, and overflowing onto floor. New water inlet valve fixed the problem.
★★★★★
★★★★★
Paul B - June 20, 2018
Verified Purchase
It was good!
It was good!
★★★★★
★★★★★
Chester B - December 26, 2020
Verified Purchase
water inlet valve
Kudos! the part arrived promptly, in good condition, fit exactly to replace the OE part.
Fantastic service. Thanks for making owning a home more affordable. This was not my first order and it most definitely will not be my last.
★★★★★
★★★★★
ANNE M S - April 11, 2018
Verified Purchase
Easy repair
Part came on time. Was in great condition and easy to install. Thank you for the directions.
★★★★★
★★★★★
Thomas W - April 1, 2020
Verified Purchase
Dishwasher water inlet valve
Part came fast and was well packaged. Easy installation, dishwasher working fine now.
★★★★★
★★★★★
Don H - April 14, 2018
Verified Purchase
Part was exact replacement
The install video was dead on for my model. Exact match. Even though you are handy or have done it before, its always worth the 3 mins to review the video. Always a hint here or there that saves time or "uninstall and reinstall" moments. My dishwasher is as good a new. Runs perfectly now at 9 years old
★★★★★
★★★★★
Edmund J - April 17, 2018
Verified Purchase
Great experience. Easy to order and easy to install.
Part was an exact match. Made the repair easy
★★★★★
★★★★★
Richard L - April 17, 2018
Verified Purchase
It works perfectly
It works perfectly.
★★★★★
★★★★★
Janet F - May 17, 2018
Verified Purchase
Water inlet value
Part works great. Dishwasher is working fine.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 20 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water was leaking from the inlet valve
Turn off electrical power at breaker. Turn off the water supply at nearest valve, disconnect supply line. Disconnect drain hose. Remove screws securing dishwasher to underside of countertop. Pull dishwasher out from under the countertop, and tip it to one side. Disconnect supply line from old inlet valve. D
... Read moreisconnect rubber hose from inlet valve. Unplug the two wires from the valve solenoid. Remove the single screw holding the valve bracket in place, and slide the bracket to remove it.
**Unless you have an extra as I did, you will need to swap the brass 90° elbow from old valve to new. Don't forget to use thread sealer or tape.**
Reassembly is the reverse of disassembly. Watch for kinks in the supply or drain lines when pushing the dishwasher back under the counter. Be sure to check for leaks the first time you run it!
All said and done, it probably took me longer to type all this on my phone than to do the repair.
Read less
Mark from WHITEWATER, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inlet valve failed causing dishwasher to flood the kitchen.
Replacing the valve was easy, but removing the old one was a nightmare- old, stuck parts, awkward location, minimal work space. Old fitting that connects hose to valve could not be removed, so I had to go to a plumbing supply company to get a replacement.
Rob from GREENSBORO, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Wrench (Adjustable)
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water filling dishwasher even when it is off
I followed the video but reversed two of the steps. The video said to remove the water line and then remove the valve. However, there was not much room to get to the water line and it was really stuck after 10+ years. So I removed the valve first and that allowed me to move it around and get a better angle to remove the water line. Fo
... Read morer the new valve, I attached the water line first and then installed the valve. Dishwasher works fine now.
Read less
Cyrus from COLFAX, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no water to dishwasher
googled "no water to dishwasher" and got u-tube video on 3 things to look for. first was water intake valve. video then showed how to remove and install. ordered part and installed. now have water to dishwasher tom
thomas from JACKSON, WY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water coming into dishwasher
The repair was easy in that there were no surprises due to the video. The extra time was due to not being able to pull the appliance out for easy access. It was great to have the percentage for solving the problem identified on the website.
Charles from WEST PALM BCH, FL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Wrench (Adjustable)
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking out on sides and front of door. When opening door the tub was to full and would spill out.
Shut water off to dishwasher and turn power off. Remove kick plate in front. The part on my machine was on the left side. Not a lot space to get hands or tools in. Unhook water line watch for residual water , take a picture or make a mental note of how wires are hooked up and the direction of the brass coupling ( the part the water
... Read moresupply screws in to). Sliding the old part is easy. The hard part was getting the brass coupling off. Calcium and age made it difficult. Once you have it off reinstall to new part , reverse steps. Make sure everything is tight Turn water on and power. No leaks. Tub does not overfill.
Disassebled diswasher to get to main pump motor, goal was to test Ohms of motor for failure. After disassembling to get to motor it freely turned and checked good per specifications. However, chopper blade connected to motor was locked up, preventing the motor from turning thus not turning the pump. During disassembley of chopper unit, t
... Read morehe old rubber Water Inlet Valve was broken. A large seed was wedged behind the chopper preventing it from turning. Afer reassembley and installing new Water inlet Valve all works well. This project was more than I expected when I started and was not in any instruction manual to figure it out. However, if I couldn't make it work nothing would be lost other than my time and the expense of a new dishwasher which I was already looking at if I was not able to repair it. Most appliances are relatively simple if you have some understanding of electrical units and basic tools to work on them. PartSelect is a great resource for replacement parts with great shipping services.
Read less
Coy from Aurora, OH
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench set
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We had banging water pipes in the house, when the dishwasher was in use.
I replaced the electric water valve (as suggested) It was in front of the unit, so it didn't need to be pulled out. I had to disconect the water line, and a by-pass line. The hard part was disconecting this rubber hose, as it was in back of the valve. Installed the part, connected the lines and two wires...No noise, works great....
Michael from Issaquah, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak
Decided to remove diswasher from built-in space to make part changeout easier and to check drain, wiring and change out water supply line. Since we had installed ceramic tile unit was a little hard to remove. Had to adjust front height as low as possible to get out. Once unit was out parts change went smoothly. Reinstalled and ran through
... Read more entire cycle. No leaks!
Read less
Allen from Pinson, AL
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking intermittently
To perform this repair do the following: 1.) Turn off power to the dishwasher 2.) Turn off water, disconnect the water supply and drain using adj. wrench and/or nutdriver, remove any contents from inside 3.) Remove screws (2) from underside cabinet, remove kick plate from bottom by removing two (2) screws there, pull out wa
... Read moresher gently providing slack to drain hose and water line 4.) Gently place washer on side, do not invert or lean on the front side, water may enter control panel and damage it 5.) Remove the water line from Inlet valve using adj. wrench 6.) Disconnect both wires from solenoid. 7.) There is one metal screw holding the valve in place, remove it with a nutdriver, slide valve assembly out. 8.) Remove the 90 degree brass angle fitting from old valve, this may require some effort. Using thread tape, install fitting on new valve assembly. 9.) Replace parts in reverse order, using thread tape on any additional water line fittings requiring it, restoring water and power last. 10.) Run a test wash and check for leaks. Hope this helps, it did appear to fix my problem.
Read less
Erick from Cary, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
6 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dale
October 31, 2017
Water leaks into the dishwasher when it is not operating. I think it is the water inlet valve. Either a seal or the electric valve itself?
For model number GU2500XTPS7
Hi Dale, Thank you for the question. To stop the water from dripping into the appliance, I suggest replacing the Water Inlet Valve. Good luck with the repair!
20 people found this helpful.
Was this helpful?
Thank you for voting!
Adam
September 6, 2017
I have a problem with my dishwasher slowly filling with clean water from the bottom when it is not in use. Will replacing this part stop the water from seeping in when it is not in use?
For model number GU1200XTLB2
Hi Adam,
Thank you for sending in your question. Yes normally when the tub is filling with water when the appliance is not in use it indicates the water valve is stuck open and leaking water into the tub. Replacing the valve should fix the issue.
Good luck with the repair!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Floyd
August 2, 2018
The one that came out of my dishwasher has a Green female in connector by the area where water line connects on the end of the thread spool looking thing. It has fsp stamped in the metal with the word part no inscribed in metal 8268572. The part i saw on your site does not have the Green female connection place on the end of the spool looking thing on the same end of i/2 inch water line. Will your part work
Hello, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rick
July 12, 2019
The dishwasher fills very slowly after starting the wash cycle. The inlet valve screen is clear and water flows freely through the supply hose. Recently the dishwasher will discontinue the fill/wash process and stop completely. Is there a timer that would stop the dishwasher? Does it sound like a fill valve issue?
For model number KUDP01DLBS1
Hello Rick, Thank you for the question, If the appliance is filling slowly it is more then likely the valve, Water Inlet Valve, PartSelect Number PS11746141. If the appliance does not reach the proper level by a certain time (end of the fill cycle) the appliance will not proceed to the wash cycle. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pete
July 24, 2019
Dishwasher doesn't fill with enough water to allow the heating element to bring the water up to temp, and therefore ends up in clean light flash 7 times. Not the float switch, does not appear debris in inlet valve screen. Not supply water pressure. Is it possible the inlet valve is not filling dishwasher fast enough before fill timeout? What else could it be?
For model number KUDP01ILBT6
Hello Pete, Thank you for the question. If the float switch tested to be good, the next part would be the water inlet valve. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Luc
July 31, 2023
my dishwasher still fill up when i'm not using it thank you
For model number 66516872000
Hello Luc, thank you for your query. Based on our understanding of the issue, we would suggest checking the water inlet valve, part number PS11746141, to fix the issue. The attaching solenoid on the valve will open and close accordingly and supply water to the dishwasher. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
