took old one off and installed new one used electrical tape to hold glass from sliding.Unscrewed moulding and installed new one
Bruno from LE ROY, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trim piece on the botom of the oven was chipped in three places
I used the allen wrenches to block the hinges, removed the oven door and used the kitchen counter for a work station. I removed the trim piece at the bottom which released the side trim and oven glass front, and then reversed the procedure. It took more time to clean things than to do the exchange. My only issue is with Fed Ex who del
... Read moreived the first trim piece bent in the middle inside a crushed box. Part Select had another part sent the same day after I called them.
Read less
Terry from Maple Valley, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom door trim was rusted
Removed oven door and the 3 screws holding the bottom door trim. Attached new trim piece and reinstalled oven door. Entire job took less than 5 minutes.
Timothy from Terre Haute, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
11 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Glass broken on outside oven door
Checked to see that I had all the parts I needed. Installed bottom door trim then side trim pieces. Do not tighten screws. Install door handle with top trim attached over glass. Tighten screws just snug all around.
removed 3 screws holding the strip and replaced with new strip
Myron from Punta Gorda, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
January 2, 2018
I am trying to replace the trim on the bottom of the oven door. When i removed the trim piece the glass and side trim pieces came off so quickly that i didn't see how they were attached. Now i can't figure out how it all goes back together. Can you help?
For model number GR448LLXPQ2
Hi Robert,
Thank you for your question. Based on a customer comment, the customer removed the oven door and the 3 screws holding the bottom door trim. He then attached the new trim piece and reinstalled oven door. If this does not help, there is a video on our website that you can reference on how to install the door trim. The oven in the video may not show exactly like the one you have and the part being installed is the top door trim, but it will give you a general idea on how to install the door trim. You will find the video under part number PS11744040. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
January 26, 2020
Cant put door back on
Hi Robert. watch our video here: https://www.youtube.com/watch?v=skpONuI6N7Q. It should help you to show how to take off and replace the door. Thank you for your question and good luck with your repair.