Maytag/Maytag_Thumb/NLQOPENL.gif
See part 23 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Screw, Igniter

★★★★★
★★★★★
3 Reviews

Rated by 4 customers 

A Bit Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your JDS9860CDS00!
 Fits your JDS9860CDS00!
PartSelect Number PS11745563
Manufacturer Part Number WP8273062
Manufactured by Whirlpool
You May Also Need?
Product Description

Screw, Igniter Specifications

This screw is sold individually.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Whirlpool, Maytag, Kenmore, KitchenAid.
Part# WP8273062 replaces these:
AP6012356, 7101P606-60, 74009337, 8273062
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
July 30, 2019
All ingitors do not stop sparking when plugged in. They will only stop after extra large burner flames on, ignitors do npt stop with any of the others burners flamed on.
For model number JGD8430
Hi Frank, unplug the appliance and give it time to dry out. Plug the model back in and if it still is sparking then you may have to replace the igniters. Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
John
December 5, 2019
My burners aren’t sparking when trying to turn them on.
For model number WFG770H0FZ0
Hello John, thank you for writing. This sounds like a faulty Spark Module, part number PS11755330 for your model range. Good luck with your repair!

Was this helpful?
Thank you for voting!
Mary
October 14, 2022
WHAT PART NUMBER DO I NEED FOR THE FOUR SPARK IGNIGTORS ELECTRODES ON MY JENN-AIR GAS STOVE TOP SURFACE THE BURNERS serial #DY3415472 and THE BROIL/BAKE IGN ITOR THE OVEN?
For model number JGS9900CDS00
Hello Mary, thank you for your question. The Spark Igniters are the same part for the four burners on top. The part number is PS11744318. The Bake Igniter is part PS11744546 and the Broil Igniter is part PS11723189. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
Related Parts:
Cynthia
2 days ago
Need an igniter for oven, do you have
For model number WFG505MOBS3
Hi Cynthia, thank you for asking, The oven igniter, part number PS12348439, fits your model. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 2.5 / 5.0, 4 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Ignitor did not work
- Removed the cover.
- Removed te two Torx screws.
- Pulled the burner a couple of inches to be able to disconnect the wire.
- Spent a lot of time removing the small Philips screw holding the ignitor. Ended up breaking the ignitor with pliers to be able to put WD40 under the screw's head.
- Treated all screws with a high temperature copper paste to prevent oxidation.
Installed the new ignitor with the new screw.
- Reconnected the wire.
- Installed the two Torx screws.
- Voila, it works.
Other Parts Used:
Burner Electrode
  • Didier from LONE TREE, CO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
24 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
two igniters didnt function and it continued to spark after the gas ignited.
Well, after I finally got the parts, the repair was easier than anticipated. You deffinitely want to lift the unit out to replace the spark module and swap over one wire at a time so you dont forget where they go, (important on a gas stove) When I pulled out the old unit I found it was just jammed in there when constructed, I expected more from Jenn-air, and the plastic casing was broke and pulled apart. Surprised it lasted this long. Also three of the ceramic insulators on the ignitors were broke or cracked. But over all the unit was fairly simple to repair if you take your time and practice safety. Remember, you are working with gas and electicity, and use soapy water to check your connection when you reconnect the gas line. Dont try to work on it still hooked up and in its mount . Disconnect it and lift it out.
Other Parts Used:
Spark Module Burner Electrode
  • nhung from chesapeake, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
14 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
electrode broke, screw broke
The ceramic on the electrode broke due to water over boiling the week of Thanksgiving. When i tried to loosen the screw to replace the electrode it broke off inside the threads. Ordered whole new unit overnight. Back in business in five minutes. Thanksgiving was back on!! Thanks!
Other Parts Used:
Burner Electrode X-Large Burner Head with Electrode
  • calvin from Edmond, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Whirlpool gas stove burner igniter had broken.
Our existing gas stove burner igniter had broken on one of the four burners. I therefore obtained a replacement igniter and mounting screw form PartSelect.com which were indeed perfect replacement parts. However, I could not remove the burner plates from the top of the stove since they were basically welded into position by years of heat. I therefore followed instructions as submitted by a previous customer (thank you Michael of Bloomington, Il), snapped open the stove lid retainer clips, and then lifted the stove surface about 4 inches. Through that opening I was able to reach the underside of the involved burner. Unfortunately, I could not unscrew the existing broken igniter mounting screw and therefore had to break off the already broken igniter and grind down the remaining mounting screw using a drill grinder since the screw was basically welded into place. Once I did that, I was then able to install the new igniter using a separate unused screw hole already in place right beside the old previous mounting screw. With that done, the new igniter works perfectly and the burner works just like new. It was however a lengthy process over two hours long because of the glitches described above. Nevertheless I'm very pleased that the parts were perfect and the repair is complete.
Other Parts Used:
Surface Burner Spark Igniter
  • Jeff from DEER PARK, WI
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11745563
Manufacturer Part Number: WP8273062
Brand
Model Number
Description
Kenmore
66475272502
Range
Kenmore
66475273502
Range
Kenmore
66475274502
Range
Kenmore
66475279502
Range
Kenmore
66572002100
Range
Kenmore
66572002101
Range
Kenmore
66572002102
Range
Kenmore
66572002103
Range
Kenmore
66572002104
Range
Kenmore
66572004100
Range
Kenmore
66572004101
Range
Kenmore
66572004103
Range
Kenmore
66572004104
Range
Kenmore
66572012100
Range
Kenmore
66572012101
Range
Kenmore
66572012102
Range
Kenmore
66572012103
Range
Kenmore
66572012104
Range
Kenmore
66572014100
Range
Kenmore
66572014101
Range
Kenmore
66572014103
Range
Kenmore
66572014104
Range
Kenmore
66572022100
Range
Kenmore
66572022101
Range
Kenmore
66572022102
Range
Kenmore
66572023100
Range
Kenmore
66572023102
Range
Kenmore
66572024100
Range
Kenmore
66572024102
Range
Kenmore
66572029100
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service