Part Location Diagram of WP8268816 Whirlpool Tine row Clip
See part 4 in the diagram
Replacing your Kenmore Dishwasher Tine row Clip
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Tine row Clip WP8268816

★★★★★
★★★★★
13 Reviews

Rated by 24 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 11.14
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11745467
Manufacturer Part Number WP8268816
Manufactured by Whirlpool
Product Description

Tine row Clip Specifications

This clip attaches the Tine row to the rack. Sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Kenmore Dishwasher Tine row Clip

Replacing your Kenmore Dishwasher Tine row Clip
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, KitchenAid, Whirlpool.
Part# WP8268816 replaces these:
AP6012260, 8268816, 9743017
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
13 Reviews
4.7
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    2
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 24 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Tine clips were broken
Removed the top glasses rack from the dishwasher and removed the broken clips from the rack bar by popping them off with my fingers. Could have used a screw driver if fingers weren't strong enough.
Took the new Tine Clips from the plastic packs and used the other side of the rack (older clips) as an example to position the clips on the rack tines (nomenclature??). Aligned all three clips then lowered the assembled parts into position then pressed one side of each clip into the correct position, then did the other side. If you tried to press the single clip one at a time it would mis-align the other 2 clips. Easy does it!!!
  • Donald from BOULDER, CO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic tinerow clips were broken.
The clip configuration combined with how the tine bar was suppose to snap in and out of the clip was actually quite confusing but once I was able to figure out how to slip the clip onto the tine bar the repair took less than 10 seconds.
  • Dennis from ANTIOCH, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tinerow clips were broke
No problem. Just snapped new parts in place. My wife has been after me for 2 years to fix this. I had it looked up on the internet an ordered and paid for in 10 minutes 3 days later the parts arrived and in 10 minutes job was done.
Other Parts Used:
Water Inlet Tube Holder Tine row Clip
  • Terry from Pevely, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken tinerow clips left cup rack "flapping -in-the-breeze".
Removed top rack from dishwasher, removed broken clips - 2 out of three were snapped, and replaced them with FOUR - spaced more regularly to take the stress since this is the second time 2 out of the 3 had snapped. Simple job; rack swings well now, folds easily and clips securely upright.
Other Parts Used:
Tine row Clip Dishrack Clip
  • Stanley from West Sand Lake, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Some racks had deteriorated after 17 years of use.
Very easy!
Other Parts Used:
Flexrow Tine Tine Pivot Clip Tine Row Tine row Clip Multi-Position Upper Tine Row
  • Dan from Ballwin, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broke and worn parts
Actually I had taken the dishwasher most of the way apart to clean out some pieces that had gotten to the pump impellor and were making noises when draining. While doing this I found the flange on the wash arm bearing ring was totally wore away.
The clips on the tinerow clip had been broke for a while so I went ahead and replaced them too. Both parts were easy to replace requiring no tools.
One thing I should mention is that the replacement tinerow clips were gray instead of white.
Other Parts Used:
Wash Arm Bearing Ring Tine row Clip
  • Hubert from Edwardsville, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken tinerow clips
Ray from San Rafael, CA said to apply them to the thick bottom wire of the moveable fence. That is what we did. We used the old broken ones as a guide to where they should be placed on the moveable fence. Then, we followed Richard from Larkspur, CO's advice to pinch them on using pliers. Worked like a charm! Thanks very much!
  • Dina from Pittsburgh, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken tine retainers
easy "snap-in"
  • Noel from Papillion, NE
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The tinerow on the left side of the upper shelve had all three clips broken and thus wouldn't stand staright
Found it best to take the tinerow out altogether and put the new clips into it.

First fit the upper part of the clip on the tinerow, then the middle clip. Laslty put the three clips onto the main carriage.

Looking at how the clips were on the tinerow on the right hand back side helped.
  • John from Chapel Hill, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacement of worn or broken parts
The wash arm parts were the most functionally important. These just snap into place. I was amused to see that the lower spray arm seal no longer even resembled the shape of the original part. My seal had worn to the shape of a thin fingering. The dish rack clips were a little more challenging. Snapping off the old ones was straightforward but figuring out the proper orientation of the new clips required a little thought. However, I like puzzles.
Other Parts Used:
Tine Pivot Clip Wash Arm Bearing Ring Tine row Clip Dishrack Clip Lower Sprayarm Seal
  • Julian from Norton, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Laura
December 13, 2017
Does part # wp8268816 work on both the right and the left hand side of the upper tine racks?
For model number Kuds25shbl1
PartSelect logo
Hi Laura, Thank you for your question. Based on the diagram, the clip should work in the left, right or the center of the tine row. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11745467
Manufacturer Part Number: WP8268816
Brand
Model Number
Description
Kenmore
66515752000
Dishwasher
Kenmore
66515754000
Dishwasher
Kenmore
66515759000
Dishwasher
Kenmore
66515772990
Dishwasher
Kenmore
66515772992
Dishwasher
Kenmore
66515777990
Dishwasher
Kenmore
66515777992
Dishwasher
Kenmore
66515779990
Dishwasher
Kenmore
66515779992
Dishwasher
Kenmore
66515801890
Dishwasher
Kenmore
66515801891
Dishwasher
Kenmore
66515805890
Dishwasher
Kenmore
66515805891
Dishwasher
Kenmore
66515808890
Dishwasher
Kenmore
66515808891
Dishwasher
Kenmore
66515812990
Dishwasher
Kenmore
66515812992
Dishwasher
Kenmore
66515817990
Dishwasher
Kenmore
66515817992
Dishwasher
Kenmore
66515819990
Dishwasher
Kenmore
66515819992
Dishwasher
Kenmore
66515822000
Dishwasher
Kenmore
66515824000
Dishwasher
Kenmore
66515829000
Dishwasher
Kenmore
66515831790
Dishwasher
Kenmore
66515831791
Dishwasher
Kenmore
66515831792
Dishwasher
Kenmore
66515831793
Dishwasher
Kenmore
66515831794
Dishwasher
Kenmore
66515832000
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service