Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Peter V - September 8, 2022
Verified Purchase
did the trick!
Parts arrived as expected, easy to install and dishwasher is working great again.
★★★★★
★★★★★
William N - July 13, 2021
Verified Purchase
Wheel keeps it rolling
My Kitchenaid dishwasher is almost 20 yrs old buts it’s a good one , so when the upper rock tumbled down I saw it needed some wheel mounts .
Quick deliver and install and it’s good
★★★★★
★★★★★
Sandy F - October 12, 2020
Verified Purchase
Just what I needed
Came quickly and now back in working order.
★★★★★
★★★★★
Brandon C - June 16, 2020
Verified Purchase
Wheel
Worked as advertised
★★★★★
★★★★★
Esther K - May 6, 2020
Verified Purchase
Stationary Wheel!
Yes,quite pleased with the speed of the order as well as how easy it was to find the part on your website! Thank You!
★★★★★
★★★★★
Mike P - December 6, 2019
Verified Purchase
New part
The new part appeared to be made out of an improved material. Install went fine.
★★★★★
★★★★★
Barbara M - March 9, 2019
Verified Purchase
Very easy repair
Very easy to figure out the part I needed
★★★★★
★★★★★
Felecia W - February 5, 2019
Verified Purchase
Dishwasher Repair
This was an extremely simple repair. The parts were right, so I just popped off the old and popped on the new. Reinstalled the top rack and end caps. No problem.
★★★★★
★★★★★
Ira W - January 21, 2019
Verified Purchase
Came on time, worked as expected, installation was very difficult
One needs to know that in order to install this part you must remove the end caps which do not come off easily, and must be reinstalled by inserting them sideways. Then remove the upper tray and the damaged part. To install the new part is tricky and hard to explain here. There should be a YouTube for this. It took me quite some time to figure out the install. Then, if the part to be installed is in the front of the tray, be sure to install it at least a foot back from the front of the tray or you will not be able to pull the tray completely out.
★★★★★
★★★★★
Kenneth B - December 12, 2018
Verified Purchase
worked as expected
the parts worked perfectly, thank you for sending them so quickly.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 10 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Very difficult to figure out install
First, to do this correctly and easily, you should remove the end clips holding the upper tray and remove the tray. To do this, you must pull the clips from the side and install those clips the same way-slide in from the outside. Otherwise if you try to pull the clips straight out you could break the clip. To install the new part, I
... Read more struggled with how to do this for almost an hour. The key is to slip the roller thru the area where it is to be installed and hook one side to the tine on the lower left then carefully move the entire part up, being sure to have the left part of the unit positioned so that it also sits as intended. There should be a UTube for this part, or it should be sent with instructions. Very frustrating..
Read less
Ira from ROCKVILLE, MD
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic bracket broke holding rack up
part was easy snapped into rack holding the rack in tact.
carol from Sebastian, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the bracket the holds the basket broke and would not move in or out, I orderd the part in the morning and received the part the next morning FED X
I removed the old broken bracket and click on the new bracket it took me about 2 minutes to do. I was very pleased with the service. I am a single woman and was able to repair the part my self (Horray)
Christine from Thousand Oaks, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the wheels just fell apart from all the heat and chemicals
pulled the ends off the top rails--pulled the top tray out--set it up on its back end--replaced the wheel mounts by threading them through the sides of the tray--returned the tray to the machine and replaced the ends
Cynthia from Lynchburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel mount broke on right side of top shelf. Shelf not supported.
I order a pair of wheel mounts and replaced both. Squeezed ends of plastic "plug" on the front edge of each rail (top shelf) and removed plug. slid out top shelf, snapped off old whell mounts, snapped on new wheel mounts, slide shelf back into track and re-inderted end "plugs". Done!
Warren from Wantagh, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
13 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel mount was broken
Husband removed a small piece at the end of the upper tray frame and slid new wheel mount on. Clicked it into place and replaced end piece. Very pleased to save expense of a house call and delay that would have been required while part was ordered.
Margaret from Las Cassas, TN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cheap asian import dishwasher
Replace sheet parts with more sheet parts.
Paul from Suwanee, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken wheel mount
I just popped of the end cap, removed the old part and installed the new. Very easy!
Cindy from Hattiesburg, MS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels on top rack were broken
Removed rubber stoppers from arms on top rack of dishwasher. Pulled out and removed top rack from dishwasher Took off old wheels and replaced with new wheels on rack. Ran wheels into arms of dishwasher and replaced rubber stoppers. Done.
James from Brooklyn, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel on top rack broke
In less than 5 minutes, we removed the stopper on the end of the arm that held the top rack, slid off the top rack, rotated off the broken wheel assembly, rotated on the new one, slid the rack back on, and replaced the stoppers.
Polly from Powell, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
34 of 40 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William Murphy
February 6, 2019
I have a KitchenAid dishwasher. The upper dishwasher rack wheels pull out from the bracket that holds the top rack. I assume that i need to replace the four upper dishwasher wheel part no. 8268785. The replacement looks straightforward. However, i am not sure how to get the end cap off and then back on. Can you help me with this? Thanks.
For model number KUDP01DLWH6
Hello William, Thank you for your inquiry. Upon reviewing the part I show that in order to remove the track end cap, you would use a flat blade screwdriver to press the tabs on the inside of the track, then remove the stop. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
March 6, 2020
Part # ps11745464 our rack keeps pulling out of the f-shaped track in the part which holds onto the rack. In your 2nd picture, that's the left end of the part. We can push the rack back into them but after a wash or 2 they pop out again especially when there weight, that is, a load of dishes in it. Doesn't look like anything is broken? Your thoughts? Thx
For model number KUDPO1DLBS6
Hello and thank you for writing.
It sounds like the plastic parts might have become faulty due to the heat of the dishwasher, they might not show any damage that would be obvious, but they still might have bend and that could be causing these symptoms. You should consider changing those parts, but do inspect them for damage such as being slightly bent. We hope this information helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ron
July 14, 2021
Does bracket support arm go on vertical or horizontal? Where should bracket be placed on tray?
Hello Ron, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Rich
October 18, 2021
The wheel of the wheel assembly you sent is too small. The one I need is 1 and quarter inches in diameter.
For model number KUDK01IL
Hello Rich, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11745459. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello Jim, Thank you for the question. Once the Rack is removed from the Appliance the Wheel and mount just clip or snap onto the Dish Rack. To remove you just need to snap the Mount off the Rack. We hope this helps!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dishwasher","title":"Dishwasher","url":"/Dishwasher-Parts.htm"},{"position":2,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/Dishwasher-Wheels-and-Rollers.htm"},{"position":3,"name":"WP8268785","title":"WP8268785","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
