See part 8 in the diagram
ELECTRONIC CONTROL BOARD
$
138.96
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS11745310
Manufacturer Part Number WP8206602
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore.
Part# WP8206602 replaces these:
8206602
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kim
November 30, 2018
I keep getting this msg: F9.Q touch communication. I’ve cut power off at the breaker and unplugged trying to do a hard reset. Unfortunately, the keypad works sporadically but still receive said msg. Is this the part i need to fix this issue?Thanks in advance!
For model number GH7208XRQ1
Hello Kim, Thank you for the question. The F9 Error code generally means there was a power surge and it may have shorted the relay board. Normally the Board, PartSelect Number: PS11745310 will need to be replaced. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
David
November 16, 2019
Does this part work on the above Whirlpool model number microwave?
For model number GH7208XRB-0
Hello David and thanks for writing.
No, but Part Number: WPW10403039 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Bob
December 11, 2017
Do you have any instructions on how to replace this board? (part# 8206602) looks like i need to remove the door assembly to get to it. Note: Display lights up but none of the touch functions respond. Got an f9.Q error code before the display quit functioning completely. Display would flicker on and off during use for the previous week. Thank you
For model number GH7208XRS2
Hi Bob, Thank you for the question. To access this board, First unplug appliance. Open the door and pull the two tabs and remove the center air flow screen from the top of the cabinet. Remove the four screws from the right panel cover and then pull the cover forward, to remove it. Remove the screw from the right panel to remove the Relay Control Board. Lift the panel and relay control board to unhook the two side tabs, then pull the right panel and relay control board forward. Disconnect all of the wires from the relay control board. Squeeze the locking tabs on top of the six standoffs, and pull the relay control board off the standoffs. Remove the screw from the green ground wire and remove the relay control board.Reverse the steps to reinstall. Hope this helps!
Was this helpful?
Thank you for voting!
Shawn
April 30, 2018
I recently asked a question about my kitchen aid microwave. You guys diagnosed the problem. I am interested in getting the part but i would like to watch a how to video to you guys provide anything like that? Please advise
For model number KHHC2090SSS1
Hi Shawn, Thank you for the question. Very sorry but we do not have a video for the relay control board. Here are some installation steps that may help. First you will need to unplug microwave oven. Open the microwave door and pull the two tabs to remove the air flow screen from the top of the cabinet. Next remove the four screws from the right panel cover and pull the cover forward to remove it. Remove the screw from the right panel to remove the relay control board. Lift the right panel and relay control board and unhook the two side T-tabs.Pull the right panel and relay control board forward and disconnect the wire connectors from the relay control board plugs. Squeeze the lock tabs on top of the six standoffs, and pull the relay control board off the standoffs.Remove the torx screw from the green ground wire and remove the relay control board. Hope this helps!
Was this helpful?
Thank you for voting!
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11745310
Manufacturer Part Number: WP8206602
Manufacturer Part Number: WP8206602
Brand
Model Number
Description