We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
February 25, 2020
How to replace surface igniter part # wp8190892
For model number GLS3064RS02
Hello Ivan, thank you for your question. First, unplug the power cord and remove the grates off the top of the unit. Remove the caps, and then you will locate the mounting screws securing the burner head. Detach the spark wire from the surface igniter, and tape to the top so that the wire doesn't go down inside the unit. Turn the burner head over and remove the igniter and then reverse the steps to reinstall. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
October 16, 2022
Some of my igniters only click once when I turn the knob, not enough to get a flame going and I end having to use a lighter. Will new igniters fix that or is it something else?
For model number GLS3064RS01
Hey Charlie, thank you for contacting us. We have researched your model and found that the issue is probably with the Spark Module, part number PS16744819. If that does not take care of the issue, then the problem is most likely to be related to the Spark Ignition switch, part number PS11745165. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.