Hi Brian, Thank you for your question. The F73 error code is letting you know that there is a communications error between the main control board and the interface control board. You will need to check both parts and the wiring between them. I hope this helps. Thank you and have a great day!

Hello Jerry, thank you for your question. We would advise testing the door lock/latch switch assembly with a multi-meter to test the part for continuity, and replacing it if it shows no continuity. The drive motor may also be worth checking to see if it is getting power properly. I hope this helps.

Hello Jim, Thank you for the question. If the latch is defective it can engage. Unfortunately it would need to be replaced. Thank you for your inquiry, good luck with this repair!

Hi Andy, Thank you for your question. The F11 error code indicates that you have either a faulty electronic control board, part number PS2581064, or a faulty mircocomputer control board, part number PS11745082. To verify which part is causing the issue you can use a multimeter to test them. I hope this helps. Thank you and have a great day!

Hello and thank you for writing. Error code F05 on some washing machines means the water valve PS11751015 has “jammed” . So the washing machine thinks it is full of water and refuses to spin. Error C02 notices the washer does not fill with water except if you run the quick diagnostic test. So chances are the water inlet valve has gone defective and needs to be replaced. We hope this helps. Please contact us anytime if you require further assistance.