Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
August 22, 2019
Im looking for the the cold water double inlet value for this model. Do you stock one and if so what is the part number and how much is it. Thx paul
Hello Paul, thank you for inquiring. The Dual Cold Water Valve for your model is part number PS11750469. The price and availability is listed in the part description. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Candace
April 2, 2022
My washing machine will turn on and spin one time to check the balance of load then when it goes to fill the machine with water, all it does is make a clicking sound. What could be the reason for that?
For model number WFW9750WW01
Hello Candace, Thank you for contacting us. We suggest testing the Water Valve. Set your multitester to the ohms resistance scale X 1. Place each of the meter's probes to one terminal. Because the reading can vary from brand to brand and from model to model, there is no one reading you should receive. However, if your test produces a reading of infinity, then the solenoid is bad and the water valve should be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Error code F8E2, I’ve replaced the CCU, cleaned the dispenser, checked the mechanical linkage, confirmed continuity of DI6 and watched the dispenser motor move the diverted valve move through all positions. The quick diagnostics finishes without errors but when I do a cycle it stops at step 14 of 17 with F8E2 dispenser actuator failure. Is there a specific motor that drives the dispenser actuator? Any tips?
For model number MHW9000YG0
Hey Raymon, thank you for your inquiry. We have researched your model and found that if you are facing dispenser actuator failure then we recommend you change its dispenser actuator switch, part number PS11753574. If you require assistance to place an order, please contact customer service. We hope that helps!
Hi ! i'm having clear water leaking under the cabinet. I've opened the top and look for leaking parts but i did not notice leaking from the inlet or water entry pipes until the dispenser. As it is only clear water leaking, no soap or dirty water, i don't find where this water may come from? any tips ? Many thanks for helping ! :-) good day
For model number MHWZ600TW01
Hi Josee, thank you for the question. According to our research, we would recommend checking the hose that it is connected properly. If it does not help, you may need to replace washer dispenser hose, part number PS12723930. We hope that helps!
