Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
November 30, 2021
The oven I'm dealing with takes about 10 mins to heat. Is this normal? It starts at 100 degrees, is it normal temperature the oven star on the top if oventat. The bottom ignitor works. I'm I suppose to see the top ignitor be to lit
For model number AGR5630BDB1
Hello Khalid, Thank you for the question. We suggest testing the Oven Sensor with a Multimeter. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!