Range Infinite Burner Switch - 8 Inch

Hi Curtis, Thank you for the question. Sounds like you will need to test the limiter on the element. To test the limiter with a multi meter, you will test from 1a to 2a and at room temp there should be continuity. If there is no continuity the element is defective. If it tests good then you will need to replace the switch that controls the element. Hope this helps!

Hello Thomas, Thank you for the question. This is normally an indication the Switch, PartSelect Number PS11744487 that controls the element is faulty and will need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Samuel, Thank you for your inquiry. First, disconnect power form your appliance when doing any repairs. On the side that the light is on, both your switches have a "P" terminal. Be very careful when doing this. Unplug the wire from the "P" terminal from one of your switches and see if that turns the light off. If the light stays on you will know that you have to replace the switch your did not unplug. If the light shuts off, you will know that the switch you have to replace is the one you unplugged. If you feel that you are unable to do this repair, I would recommend contacting an appliance repair technician to help you out. Good luck with your repair.

Hello Bill,Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11744486,Manufacturer Part Number WP7403P238-60. Hope this helps!

Hello Larry, Thank you for your inquiry. It could be the switch, the 6 inch switch is part# WP7403P238-60, you can test it with a multimeter to see if it has continuity. It could also be the wiring as well, so check the wires for any visible damage. Hope this helps!

Hello Randy, Thank you for you inquiry. It sounds as though the electronic control board is not functioning properly. You can test the part with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

Hello Bill, Thank you for your inquiry. The part number for the switch for the dual burner is WP74003122. Hope this helps!

Hi Jose, Thank you for your question. For an 8" element, you would have to replace the 8" switch. You would not be able to properly run that element with a 6" switch. I hope that clears this up for you. Good luck with your repair.

Hello Anh and thanks for writing. If this the correct switch does not improve the symptom you might have to replace the elements themselves. We hope this helps. Please contact us anytime.

Hi Mike, thank you for your question. This: 7403p524, unfortunately is not a part number. However this part that you have questioned underneath is the correct part according to your model number itself there. Which is what you always want to go by when looking for parts. I hope that helps. Good luck with your repair.