Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ramon U - July 30, 2020
Verified Purchase
Easy repair, perfect fit.
Part delivered as scheduled and in perfect condition
★★★★★
★★★★★
Patrick A - July 8, 2020
Verified Purchase
Nice handle no screws
I ordered the handle and the screws were separate which was clear in the description. I ordered the screws at the same time paid for them and never received the screws at $7 a piece. So frustrating... easy job if you had all the parts!! Not happy, not reliable!
★★★★★
★★★★★
Ernest L - May 28, 2019
Verified Purchase
Back to Baking
Was easy to install even by an 80 year old. Oven looks new. Received fast, even with regular shipping. Now I can start baking again. Friends will be happy!!
★★★★★
★★★★★
Donald F - March 21, 2019
Verified Purchase
Perfect!
The new door handle EXACTLY replaced the old, broken one. The best part - PartSelect included a how-to installation video link with the shipping notice! Installation was easy!
★★★★★
★★★★★
Robert M - February 9, 2019
Verified Purchase
Handler of doors
Back ordered, took a month to ship. But the first place I tried to order it from cancelled my order saying they weren't going to stock it any more, so points for keeping the part available at all.
Not a simple replacement, but the video instructions, taken step by step, made it easy enough.
★★★★★
★★★★★
Beth G - February 8, 2019
Verified Purchase
Easy repair, worked great
This part worked for my oven door. The instructions also said you needed 4 additional screws but we didn't. We only needed 2 and used one of the old ones. So make sure when installing your own handle don't order more than you need.
Took us about 15 minutes to install and put our oven door back together.
★★★★★
★★★★★
Wayne C - February 7, 2019
Verified Purchase
Two months later.....
Aside from taking two months to receive the handle it was simple to install. The holes for the mounting screws appear to be all plastic where the old handle had metal, threaded inserts in them. Apparently a weak point. Time will tell if it was an improvement.
The rating would have been higher had I not had to wait so long for the part.
★★★★★
★★★★★
Jimmy C - January 26, 2019
Verified Purchase
The part is installed
I received the part quickly. It was easy to install. However the Whirlpool handle is not identical to my Maytag handle. The handle ends are not flush with the door.
★★★★★
★★★★★
Matthew C - November 27, 2018
Verified Purchase
It is what it is
It worked.
★★★★★
★★★★★
Dana F - August 8, 2018
Verified Purchase
Quick service good price
The oven handle we purchased was the heat price, came quickly, and was easily installed
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 9 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
OVEN DOOR HANDLE BROKEN AT ATTACHING POINT
1. OPEN THE OVEN DOOR TO THE FIRST STOP, PULL UPWARD TO REMOVE, ( IT WILL LIFT RIGHT OFF) 2. LAY OVEN DOOR ON A FLAT SURFACE ( HANDLE DOWN AND HANGING OFF SURFACE) WITH A TOWEL TO PROTECT THE GLASS. 3. REMOVE ALL SCREWS AROUND THE PERIMETER OF THE
... Read moreDOOR.. 4. CAREFULLY SEPARATE THE DOOR FRONT AND BOTTOM BRACKET BY SLIDING AWAY FROM THE MAIN DOOR INNER-ASSEMBLY, ( THE FRONT GLASS IS HELD BY THE TOP CHANNEL. 5. TURN THE MAIN DOOR INNER ASSEMBLY OVER AND REMOVE THE HANDLE ASSEMBLY TWO ATTACHING BRACKETS. 6. REMOVE THE ATTACHING BRACKETS FROM THE HANDLE AND ATTACH TO THE NEW HANDLE. 7. THE DOOR GLASSES CAN NOW BE CLEANED 8. ATTACH THE NEW HANDLE ASSEMBLY 9. REASSEMBLE IN REVERSE ORDER. ( BE CAREFUL WHEN SLIDING FRONT DOOR GLASS INTO THE TOP DOOR CHANNEL}
I viewed the YTube Video that showed exactly how to remove the door and all the other parts for replacement. Excellent video shows and explains how to remove, replace, and re-attach the handle and the door.
Phillip from PHOENIX, AZ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right side of lower oven door broke off
I pulled the oven door off and set it on the counter. I unscrewed all the visible screws and carefully removed the glass. Found some more screws that needed removal. Removed the old handle, attached the new. Then re-assembled everything. I kept parts aside in the order I took them off, so I knew what order to re-assemble. My only pr
... Read moreoblem was the weight of the door as I am a 74 year old female and, to me, the door was very heavy. Otherwise it was not a difficult task.
Read less
Ann from Deer Park, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken oven handle
1. Took the top screws out of the top plat on door. 2. Took the bottom screws out out of the bottom plat on door. 3. Then took glass front and bottom plat off of door. 4. Then unscrewed hand brakets off of door and raplace handle. 5 Then put door back in reverse of takeing it off.
Charles from Chancellor, AL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
36 of 44 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle Broke on one end
I first removed the drawer from under the oven, then I used 2 strips of packing tape to hold the front glass in place. Next I loosened the 4 screws on the bottom side of the door to the point just before they would fall out. Next I had someone help hold the glass as we removed the tape and slid the glass from under the handle and set it a
... Read moreside. Once the glass was off I removed the 4 screws on top of the door and the 4 screws (2 each side) holding the handle brackets. From that point it was just a couple of screws on the back of the handle to swap the broken part for new and reassembling everything. Could be done in 30 minutes, 40 by yourself. Maytag wants $24 to tell you how to do this, it's not worth the money. Also, PartSelect.com sold me the part for 30% than Sears or Maytag advertise - they've earned a permanent bookmark in my browser!
Read less
Robert from Muskegon, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced the Handle on the Range Door
After the repair I determined that the door did not need to be removed from the stove. The top 3 screws needed to be taken out, the front clase needed to be slid out by pushing it right to left or left to right. Then the bracket that held the inside screw assembly needed to be removed. The new handle needed to be installed and the brace
... Read morets put back into place. The front glass needed to be reinstalled right to left or left to right. The hardest part of my install was putting door back on the range, the hinges kept popping out of place before setting into the range. The best way to replace the hangle would be to not remove the door from the range.
Read less
Nathan from Oak Creek, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The handle to open the oven door had pulled off on the right side.
Replacing the handle requires removing the front glass, the top trim piece, and the brackets that hold the handle to the oven door. First remove the three screws that hold the metal piece at the bottom of the glass and remove that metal piece and the glass. Then remove the four screws that hold the handle bracket to the main oven do
... Read moreor. Next remove the three screw at the top of the top trim . Remove the whole trim piece with the handle and brackets. Remove the old handle from the brackets. Install the new handle onto the brackets (through the new top trim. Reassemble.
One end of the door handle had become detached due to broken part.
Removed the door form the oven. Removed all screws holding the door covers. Removed all screws holding the handle mounting brackets and handle. oriented the new handle to the door and reversed the disassembly process.
William from Orlando, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
10 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom oven door handle broke when someone tried to open door too soon following self-cleaning cycle.
We removed the door from the hinges by sliding it up. Then we removed all the screws holding the door together. We had to remove the screw securing the trim. Next we removed the screws inside the trim holding the old handle. We replaced the handle and trim and screws in reverse order. Finally, we re-attached the door by sliding it onto t
... Read morehe hinges.
Read less
ROY LYNN from SEMINOLE, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bernadette
September 18, 2017
Mounting screws for oven door handle
For model number MGR5755QDW
Hi Bernadette,
Thank you for the question. The mounting screws for the handle are PartSelect Number PS11744138.
Good luck with the repair!
Need to replace handle, video on your site appears to connect new handle differently, does all attaching parts come with new handle part number ps11744470?
For model number MER5755QAW
Hello Vern, Thank you for the question. The mounting screws sold separately. You will need two of the PartSelect Number PS11744138. Thank you for your inquiry, good luck with this repair!
My over door handle broke. What is the correct part to replace this? It is a stainless steel and black
Hi Dan,
Thank you for your question. Before we can assist you further we would need the model number from your oven. Here is a link from our website that you may reference on where to find the model number on your oven, https://www.partselect.com/Find-Your-Range-Model-Number.aspx. We hope this helps. Thank you and have a great day.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cindee
July 18, 2019
Do i need mounting screws for my oven door handle on model #mer5755qaw
For model number MER5755QAW
Hi Cindee, thank you for your question. If you do not have your original screws then yes, you would need them as well. Good luck with your repair.
