| |
12 of 25 people found this instruction helpful
Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: James from Barefoot Bay, FL
Broke the handle off the overn door
I unscrewed the framing trim around the door, secured the new handle to the brackets and reassembled the trim....all told its about 10 screws to remove/put back in....
Thanks to Suzanne I received the replacement handle in a very timely manner from Pars Select
|
1 of 1 people found this instruction helpful
Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Robert from IDAHO FALLS, ID
Door handle plastic part holding handle to door broke.
Ordered new handle removed door from oven by pulling up and out. Removed approximately 5 screws on bottom 2 screws each on sides. Removed side pieces. Removed front glass. Removed old door handle. Had to tap the new door screw holes to accept a 10 X 3/4" Sheet Metal screw. Installed new handle and replaced the oven glass and side pieces. Slide the door back onto oven door brackets.
|
3 of 10 people found this instruction helpful
Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Kathleen from JOHNSBURG, IL
The handle broke off.
Took the door off the hinges and placed it on the floor. Removed the trim from the oven door. Removed bracket holding broken oven handle on. Using the same bracket, replace the oven handle. Replaced the trim and put oven door back on hinges.
|
4 of 15 people found this instruction helpful
Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: audrey from roscoe, IL
New range handle
was a 15 minute job
|
1 of 9 people found this instruction helpful
Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Richard from South Boston, VA
While moving the stove it dropped and the oven door glass and handle broke
Removed the broken handle cleared the glass away and installed the new parts.
|