Part Location Diagram of WP74006515 Whirlpool Screw with Washer
See part 10 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Screw with Washer WP74006515

 Fits your CG34800ADV!
★★★★★
★★★★★
1 Review

Rated by 5 customers 

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 7.95
  On Order
 Fits your CG34800ADV!
PartSelect Number PS11744138
Manufacturer Part Number WP74006515
Manufactured by Whirlpool for Maytag, Amana, Whirlpool, Crosley
Product Description

Screw with Washer Specifications

This is a replacement screw and washer for your oven/range. It is a Phillips-head screw approximately half an inch long, and the washer is approximately 1 inch in diameter. The screw attaches the oven door handle to the door. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Range, Wall Oven.
Part# WP74006515 replaces these:
AP6010947, 7101P538-60, 7101P543-60, 7101P544-60, 7101P681-60, 74006040, 74006295, 74006515, 74006635, 74006777, 74011674, WP7101P681-60
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
1.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 2.9 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
OVEN DOOR HANDLE BROKEN AT ATTACHING POINT
1. OPEN THE OVEN DOOR TO THE FIRST STOP,
PULL UPWARD TO REMOVE, ( IT WILL LIFT RIGHT
OFF)
2. LAY OVEN DOOR ON A FLAT SURFACE ( HANDLE
DOWN AND HANGING OFF SURFACE) WITH A
TOWEL TO PROTECT THE GLASS.
3. REMOVE ALL SCREWS AROUND THE
PERIMETER OF THE DOOR..
4. CAREFULLY SEPARATE THE DOOR FRONT AND
BOTTOM BRACKET BY SLIDING AWAY FROM
THE MAIN DOOR INNER-ASSEMBLY, ( THE
FRONT GLASS IS HELD BY THE TOP CHANNEL.
5. TURN THE MAIN DOOR INNER ASSEMBLY OVER
AND REMOVE THE HANDLE ASSEMBLY TWO
ATTACHING BRACKETS.
6. REMOVE THE ATTACHING BRACKETS FROM
THE HANDLE AND ATTACH TO THE NEW
HANDLE.
7. THE DOOR GLASSES CAN NOW BE CLEANED
8. ATTACH THE NEW HANDLE ASSEMBLY
9. REASSEMBLE IN REVERSE ORDER.
( BE CAREFUL WHEN SLIDING FRONT DOOR
GLASS INTO THE TOP DOOR CHANNEL}
Other Parts Used:
Door Handle Screw with Washer
  • Curt from ORANGE, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
handle on oven door broken on one side
once I figured out how to remove door it was a piece of cake for a 72 year old man.
Other Parts Used:
Door Handle Screw with Washer
  • Leslie from HARVEY, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Handle plastic part holding handle to door broke.
Ordered new handle removed door from oven by pulling up and out. Removed approximately 5 screws on bottom 2 screws each on sides. Removed side pieces. Removed front glass. Removed old door handle. Had to tap the new door screw holes to accept a 10 X 3/4" Sheet Metal screw. Installed new handle and replaced the oven glass and side pieces. Slide the door back onto oven door brackets.
Other Parts Used:
Door Handle Screw with Washer
  • Robert from IDAHO FALLS, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The handle on the upper oven broke off at both attachment points.
The repair process is not logical. It appears as if it were engineered for the average person to not be able to fix it. The advice from previous posters was invaluable.
Remove the door from the hinges. Then remove all the screws from the four outer panels. The glass window will fall out, be careful. It's OK, though, it probably needs cleaned like ours did. The new handle is now easily replaced. However, the replacement handle has cheap, plastic attachment points, vice the original's metal ones (which broke after a couple years.) As I was screwing in one of the new screws, I felt it already stripping...at least I now know how to replace the handle when it breaks again.

Partselect.com beat Maytag on the overall price. Maytag sold the handle cheaper but the screws were three time the cost and shipping was twice the cost. I bought the standard shipping (2-3 days) , but the part came the next day! Yea Partselect!!

This is what I learned: Partselect is great...Maytag makes junk.
Other Parts Used:
Door Handle Screw with Washer
  • Tom from Huntingtown, MD
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
48 of 55 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace Oven Door Handles
Be prepaired to take the glass out. Unexpected, but not too hard. A right angle screw driver can be helpful for the bottom door. Takes some skill and patience. Good Luck! I am happy with the parts. Delivery time was quick.
Other Parts Used:
Door Handle Screw with Washer
  • Michael from Levittown, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
18 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Allen
March 10, 2022
How much will it cost to have the handle put back on oven door
For model number MER5775RAB
PartSelect logo
Hello Allen, thank you for your question. We do not do repair work. We sell replacement parts only. The Black Door handle is PS11744469. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744138
Manufacturer Part Number: WP74006515
Brand
Model Number
Description
Kenmore
10658039802
Refrigerator
Kenmore
22-98002
Range - Kenmore Range/Stove/Oven Model 22-.98002 (2298002, 22 98002) Parts
Kenmore
22-98009
Range - Kenmore Range/Stove/Oven Model 22-.98009 (2298009, 22 98009) Parts
Kenmore
62260002600
Range
Kenmore
62260003600
Range
Kenmore
62260008600
Range
Kenmore
62260009600
Range
Kenmore
62960002600
Range
Kenmore
62960003600
Range
Kenmore
62960008600
Range
Kenmore
62960009600
Range
Kenmore
66578002700
Range
Kenmore
66578002800
Range
Kenmore
66578002801
Range
Kenmore
66578002802
Range
Kenmore
66578002803
Range
Kenmore
66578003700
Range
Kenmore
66578003800
Range
Kenmore
66578003801
Range
Kenmore
66578003802
Range
Kenmore
66578003803
Range
Kenmore
66578009700
Range
Kenmore
66578009800
Range
Kenmore
66578009801
Range
Kenmore
66578009802
Range
Kenmore
66578009803
Range
Kenmore
66598002700
Range
Kenmore
66598003700
Range
Kenmore
66598009700
Range
Kenmore
66598013700
Range
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service