Maytag/Maytag_Thumb/53468.gif
See part 19 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Spark Igniter Set

★★★★★
★★★★★
5 Reviews

Rated by 4 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your JDS9860CDS00!
 Fits your JDS9860CDS00!
PartSelect Number PS11744110
Manufacturer Part Number WP74005890
Manufactured by Whirlpool
You May Also Need?
Product Description

Spark Igniter Set Specifications

This part provides the spark to the burners.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Jenn-Air.
Part# WP74005890 replaces these:
AP6010920, 74005890, 74006098, 7432P120-60
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

8 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maryann
November 11, 2017
All four of our burners won't light and there is no clicking. The gas supply is good and they are not clogged. We can light them with a match. What hat do we need to replace
For model number JDS9860AAP
Hi MaryAnn, Thank you for the question. I suggest replacing the Ignition Switch Harness Assembly, PartSelect Number PS11744350.This harness has all 4 burner ignition switches that sit on the burner valves. If the harness is defective or one switch, the full assembly can stop operating since they are all attached to the same harness.Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Jim
May 3, 2019
Two sealed burners on stove -- one (2elements) no spark. Switched sides still no spark. Changed burner igniter still no spark. Lights from match. Is spark igniter set the issue?
For model number JGA8100ADB
Hello Jim, Thank you for the question. Yes, if changing the burner igniter did not fix the issue the Spark Igniter Set should fix the igniting problem. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Paul
April 27, 2018
Left side, griddle cartridge: Front burner ignites but will not adjust Flame size; rear burner clicks(sparks?) but does not ignite.
For model number JGA8150ADB
Hi Paul, Thank you for your question. Based on what you described, you will need to check the spark electrode and the spark igniter kit. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Nancy
November 19, 2018
We bought a home and the grill does not light. The part that we need (my husband thinks) is either part 2 or 3 from your diagram. Do you have these two parts that we can buy? Thanks for any help! Nancy and george in arizona
For model number JGD8130ADW
Hi Nancy, Thank you for your question. Yes, these 2 parts are available. Part number 2 in the diagram is the e-burner igniter, part number PS11744119, and part number 3 in the diagram is the igniter assembly, part number PS11744120. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Vivian
December 10, 2018
The back right burner will click but not light.
For model number JGA8100adb
Hello Vivian, Thank you for the question. I suggest testing or replacing the Top Burner Igniter, PartSelect Number PS2082000 for the burner not lighting. Hope this helps, good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
Jim
April 17, 2019
Back right burner does not spark but does have gas flow and can be lit with a match. The 3 others all spark regardless of burner knob used. I replaced the top burner igniter but it still does not work. Tried switching left and right burner assemblies and the same burner still does not work. Any ideas what I need to replace? Thanks.
For model number JGD8130ADB
Hello Jim, thank you for inquiring. For this symptom you will want to replace either the Spark Module part PS2094592, the Top Burner Igniter part PS2082000, or the Spark Igniter Set part PS11744110. We hope this helps.

Was this helpful?
Thank you for voting!
Colleen
July 20, 2021
My 2 left burners light fine. The two on the right don't. I have to use a match. I can hear the clicking but no spark. What part would i need?
For model number JGD8348BDP
Hi Colleen, Thank you for your question. If the burners are clicking, but they are not lighting, check to see if the burner heads are out of alignment. If they are, they will not light. Reposition them if they are not aligned correctly. If you have recently cleaned the stovetop or if water has spilled, you will need to wait until the the burners have dried before using them. If this is not the issue, the you will need to check the spark igniters and the spark module. We hope this helps! Good luck with the repair!

Was this helpful?
Thank you for voting!
Related Parts:
Gil
April 14, 2018
All four of our burners will not light and there is no clicking. The gas supply is good and they are not clogged. We can light them with a match. What do we need to replace?
For model number JDS9860AAW
Hello Gil, Thanks for your question. This is most commonly due to the spark igniter switches themselves. You may want to test them with a multimeter to see if they have continuity in the light position. Replace them if they do not show continuity. I hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 4 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Spark igniter out
The primary spark igniters failed. Take the (small) screws out of the sides and bottom of the pan. The front of the pan must be removed from the bottom, because the front burner igniter wire is too short to allow reassembly once attached. Only other is the screws for the attachment bracket are larger than the holes. Suggest routing them out slightly to get them to grip the screws. Otherwise it is quite simple. Pull the connections with a needlenose and press the new wire connection back on firmly. Screw the screws back in the pan.
  • Patricia from Overland park, KS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
18 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas Burner Cartridge not Sparking to Light.
This cartridge fits my JennAir Downdraft Slide In Rage, part No. JDS9865BDP. The burner cartridge replaces a downdraft cooking grill module that comes with the original stove/Oven.
The spark quit on the cartridge side. I re-inserted the original cooking grill, and it lit fine. There are two components to look at. The sparker, and the burner igniter (one per each burner). Since both failed to light, I ordered the spark controller.
PartSelect has a video on how to test for failure, but I couldn't find that again.
Two screws mount the controller, two wires re-connected. and works perfect.
  • HARRY from BEND, OR
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No spark on right 2 burners, won't ignite
Remove the 2 burner assembly by gently lifting the rear burner and pull towards the back of the stove and the entire 2 burner assembly will slide out. Turn assembly up side down, remove all the screw on the cover with a philip screwdriver and remove cover. Once opened, you will see the ignighter, remove the 2 screws holding it in place, remove and replace the ignighter and secure with two screws. Follow the 2 lead wires and remove and replace with the new wires, simply pull off old and push on new wires. Replace the cover and all the screws, slide it back onto the stove and you will have ignition! Simple install, takes about 20-30 minures. If both burners are out, this is probably the problem. If only 1 burner is out, you probably need to replace the stove burner spark.
  • John from TAMPA, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top gas burners would not ignite
Removed Stove cartridge from stove-top.

Unfastened bottom screws, I recall 6.

Removed cover.

Removed two screws to igniter.

Used needle nose pliers to remove connectors x 2.

Had to drill to enlarge the mounting screws to new ignitor, then screwed it in place

Connected the two wires to each igniter.

Replaced cover n screws.
Reinstalled cartridge.

Bingo
Other Parts Used:
Top Burner Igniter
  • Robert from SHORELINE, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.8
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744110
Manufacturer Part Number: WP74005890
Brand
Model Number
Description
Jenn-Air
JDS9860AAB
Range - Slide-in, Electric-Gas Combo
Jenn-Air
JDS9860AAP
Range - Slide-in, Electric-Gas Combo
Jenn-Air
JDS9860AAW
Range - Slide-in, Electric-Gas Combo
Jenn-Air
JDS9860ACB
Range
Jenn-Air
JDS9860ACP
Range - Slide-in, Electric-Gas Combo
Jenn-Air
JDS9860ACW
Range
Jenn-Air
JDS9860BCP
Range
Jenn-Air
JDS9860CDB00
Range - 30" MODULAR GAS DOWNDRAFT RANGE
Jenn-Air
JDS9860CDB01
Range - 30" MODULAR GAS DOWNDRAFT RANGE
Jenn-Air
JDS9860CDS00
Range - 30" MODULAR GAS DOWNDRAFT RANGE
Jenn-Air
JDS9860CDW00
Range - 30" MODULAR GAS DOWNDRAFT RANGE
Jenn-Air
JDS9860CDW01
Range - 30" MODULAR GAS DOWNDRAFT RANGE
Jenn-Air
JDS9861AAP
Range
Jenn-Air
JGA8100ADB
Cooktop
Jenn-Air
JGA8100ADB11
Range - CONVENT GAS CARTRIDGE
Jenn-Air
JGA8100ADW
Range
Jenn-Air
JGA8100ADW11
Range - CONVENT GAS CARTRIDGE
Jenn-Air
JGA8150ADB12
Range - CONVENT GAS CARTRIDGE
Jenn-Air
JGA8150ADW12
Range - CONVENT GAS CARTRIDGE
Jenn-Air
JGA9150ADP12
Range - CONVENT GAS CARTRIDGE
Jenn-Air
JGD8130ADB
Cooktop
Jenn-Air
JGD8130ADB20
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8130ADB21
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8130ADS
Cooktop
Jenn-Air
JGD8130ADS20
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8130ADS21
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8130ADW
Cooktop
Jenn-Air
JGD8130ADW20
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8345ADB
Cooktop - Gas
Jenn-Air
JGD8345ADB21
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service