Bake Element (19" long x 19" wide) WP74003020 | Official Whirlpool Part | Fast Shipping | PartSelect
Bake Element (19" long x 19" wide) – Part Number: WP74003020
Bake Element (19" long x 19" wide) – Part Number: WP74003020 Bake Element (19" long x 19" wide) – Part Number: WP74003020 Bake Element (19" long x 19" wide) – Part Number: WP74003020 Bake Element (19" long x 19" wide) – Part Number: WP74003020 https://partselectcom.azureedge.net/Schematics/Maytag/32762.gif

Bake Element (19" long x 19" wide)

Product Description

Bake Element (19" long x 19" wide) Specifications

This electric oven bake element with female spade connections is 16 inches long and 19 inches wide. It has a terminal depth of three inches, making a total element length of nineteen inches.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Little to no heat when baking, Element will not heat.

This part works with the following products:

Wall Oven, Range.

This part works with the following brands:

Maytag, Magic Chef, Whirlpool, Jenn-Air, Admiral, Norge.

Part # WP74003020 replaces these:

04000071, 74003020, 7406P078-60, 7406P093-60, 8189693, 880007, Y04000071.
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 25 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Jim from Placentia, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
WP9781049, 8009, WP74003020
Oven (not broiler) element burned out, no oven heat
Inside the oven, I removed one Phillips screw on each side where the element mounts to the back oven wall. Then disconnected the wire on each side using pliers. Unscrewed glass lens, unscrewed light bulb. Replaced all pieces in reverse order. Took less than 10 minutes.
63 of 92 people found this instruction helpful.
Was this instruction helpful to you?
Mark from Conway, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003020
Main burner element got a hot spot and burned through
VERY SIMPLE. Two screws inside the overn hold the element in place, remove them - pull the element forwad to expose the connections, one on each end. Simply unplug the element from the connections to remove the old one, plug the new element into the connections, push the element back into place, and re connect the two screw's that hold it in place. That's it. 5 minutes tops. You guys were great as far as getting the part, quickly and easily. Thanks!
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
James from Harpers Ferry, WV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP74003020
The bake element broke in two pieces
removed the 2 screws connecting the element to the back wall of the oven. then slid the element towards me about 3 inches, and that exposed the wires ,which were terminated on to the element. I pulled the wires off the element, and removed it. I placed the new element in the oven,terminated the wires by pushing the connectors on to the element, slid the element towards the back of the oven , pushing the wire connections into the rear wall, until the attached flange ,on the element rested against the wall. I then terminated the screws to hold the element in place. Turned on the oven and made some biscuits. All went well
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Julie from Boerne, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
Y706037, WP74003020
Bake element melted
unscrewed back plate (one screw each side) pulled gently to expose connections. NOTE: BIG MISTAKE - forgot to shut off power!!!! I blew the clock which now needs to be replaced (in process). Back to the element though - connections very easy. One side had to be pulled from behind (used needle nose plyers to pull through opening). Connected element both sides gently pushed back in to position and replaced screws. I'll let you know how the clock replacement goes!
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Christopher from San Fransisco, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
WP74003020
The old element snapped, crackled and popped after years of relentless use-and-abuse.
Here's the way to do it, according to the "Describe how you did the repair" prompt: "First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires..."

Right, however, I shoulda-woulda-coulda listened to my fellow DYI'ers on this site about c-a-r-e-f-u-l-l-y feeding the wiring out of the rear hole.

But, first, turn off the power. Secondly, make sure the power is off at the breaker. I did and that worked fine.

However, as I pulled the connecting end of the bake element out, bummer! The spade electrical fitting popped off and retreated into a sea of insulation! Future solution? Like The Man suggested, Carefully, gently pull the element out and grab the connecting wire, pull it out to get a little slack and attach a clothespin to the end, so it won't back out and disappear! Then, detach the broken element, reverse the steps with the new bad boy and start cookin'!

If you need to pull the stove out, as we did, to "get at" the back of the oven and the retreated wire, move the oven out on a parallel height platform or boards as it exits the opening. Note carefully as to how much slack there is on the electrical connection, typically armored cable or another, er, "homebrew" electrical solution.

Take your time, as the pie will wait.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Richard from Longmont, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
WP74003020
element blew out while baking a cake didnt get no cake that night
first i disconnected the power then removed the back cover then tested the element after removing the wires and found the element to be bad , did some research found parts select and happly found our part and ordered it .part came in removed back cover unhooked two wires took out two screws , removed and replaced , thank you parts select. every one needs to know about you.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Brian from North Manchester, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003020
Oven burner burnt out
After removing the screws holding in the heating element and pulling out. I quickly realized I had a problem. The connectors on the wires and the connectors on the element were the same(female). So I had to ct the wire connectors off and put the correct type (male) connector on. If not for this the repair would have taken 5 minutes including time to pull stove away from wall and unplug and then plug back in and push to wall
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Robert from Lakeport, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003020
Bake element went kuput
This is a very easy repair. But, make sure you first unplug the stove. Simply turning off the oven is not good enough. My wire connectors were reversed compared to the new element so I had to change the ones attached to the stove from female to male connectors. I bought 18 gauge male connectors, cut the old ones off and crimped on the new ones, attached the new element, pushed it back into place, put the two screws back in place and we were back in business.
1 person found this instruction helpful.
Was this instruction helpful to you?
Marsha from Pekin, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP74003020
Bake element caught on fire.
I removed the 2 screws that hold the element in place. (located in the back of the oven). I then pulled the 2 wires about 3 inches & disconnected the 2 wires (1 red & 1 yellow).
1 person found this instruction helpful.
Was this instruction helpful to you?
Salvador R from Castaic, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003020
burned tube
I removed the two screws that attach the element to the back of the oven. Then I pulled the element out a few inches and disconnected each of the wires attached to the element.
These were easy to disconnect because they were quick-disconnect spade type connectors.
Note the easiest part was the ordering and delivered the very next day WOW
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
3 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11744015
Manufacturer Part Number: WP74003020
Brand
Model Number
Description
Magic Chef
9875VRV
Wall Oven - Built-in, Electric
Magic Chef
9875VVV
Wall Oven - Built-in, Electric
Magic Chef
9875VYV
Wall Oven - Built-in, Electric
Magic Chef
9875XRB
Wall Oven - Built-in, Electric
Magic Chef
9875XVB
Wall Oven - Built-in, Electric
Magic Chef
9875XYB
Wall Oven - Built-in, Electric
Magic Chef
9876VVV
Wall Oven - Electric
Magic Chef
9876XVB
Wall Oven - Electric
Magic Chef
9895VRV
Wall Oven - Built-in, Electric
Magic Chef
9895XRB
Wall Oven - Built-in, Electric
Admiral
A9875VRV
Wall Oven - Built-in, Electric
Admiral
A9875XRB
Wall Oven - Built-in, Electric
Admiral
A9895VRV
Microwave Oven Combo - Built-in, Electric
Admiral
A9895XRB
Microwave Oven Combo - Built-in, Electric
Magic Chef
C9875VRV
Wall Oven - Built-in, Electric
Magic Chef
C9875VVV
Wall Oven - Built-in, Electric
Magic Chef
C9875XRB
Wall Oven - Built-in, Electric
Magic Chef
C9875XVB
Wall Oven - Built-in, Electric
Maytag
CWE9000BCB
Wall Oven - Freestanding, Electric
Maytag
CWE9000BCE
Wall Oven - Wall, Electric
Maytag
CWE9000BCM
Wall Oven - Freestanding, Electric
Maytag
CWE9000BDB
Wall Oven - Freestanding, Electric
Maytag
CWE9000BDE
Wall Oven - Wall, Electric
Maytag
CWE9000CDB
Wall Oven - Freestanding, Electric
Maytag
CWE9000CDE
Wall Oven - Wall, Electric
Maytag
CWE9000DDB
Wall Oven - Freestanding, Electric
Maytag
CWE9000DDE
Wall Oven - Wall, Electric
Maytag
CWE9030BCB
Wall Oven - Built-in, Electric
Maytag
CWE9030BCE
Wall Oven - Built-in, Electric
Maytag
CWE9030BDB
Wall Oven - Built-in, Electric