Maytag/Maytag_Thumb/32762.gif
See part 3 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Bake Element (19 Inch long x 19 Inch wide)

★★★★★
★★★★★
5 Reviews
$ 55.02   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11744015
Manufacturer Part Number WP74003020
Manufactured by Whirlpool
Product Description

Bake Element (19 Inch long x 19 Inch wide) Specifications

This electric oven bake element with female spade connections is 16 inches long and 19 inches wide. It has a terminal depth of three inches, making a total element length of nineteen inches.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat
This part works with the following products:
Wall Oven, Range.
This part works with the following products:
Maytag, Magic Chef, Whirlpool, Jenn-Air.
Part# WP74003020 replaces these:
AP6010825, 04000071, 74003020, 7406P078-60, 7406P093-60, 8189693, 880007, Y04000071
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    David
    August 26, 2019
    What is the wattage range and voltage range on this baking element?
    For model number 74003020
    Hi David, Thank you for your question. The bake element has 2800 watts and 240 volts. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Nancy
    October 3, 2019
    Hi there, just resubmitting this not sure if i sent you the right email, but i do not have the mdoel # for my Magic Chef stove, bought in 2004, and needs a new oven element, which looks the exact to the one on line here, please advise if i can order this one? Thank you
    Hello Nancy, Thank you for the question. Here is a link to help you locate the model number sticker on the appliance.Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you! https://www.partselect.com/Find-Your-Range-Model-Number.aspx

    Was this helpful?
    Thank you for voting!
    Gary
    November 23, 2019
    Element not getting hot in oven if i remove element can i check with a ohm meter
    For model number Bake element waytag 74003020
    Hello Gary and thanks for writing. Yes, you can check the element for continuity with an ohmmeter. Hold one probe on each of the termianls, the needle should move and show between 1 and 50 ohm of resistance. If you have resistance your element is good. We hope this helps. Please contact us anytime.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 4.4 / 5.0, 25 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Oven (not broiler) element burned out, no oven heat
      Inside the oven, I removed one Phillips screw on each side where the element mounts to the back oven wall. Then disconnected the wire on each side using pliers. Unscrewed glass lens, unscrewed light bulb. Replaced all pieces in reverse order. Took less than 10 minutes.
      • Jim from Placentia, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WP9781049, 8009, WP74003020
      66 of 97 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Main burner element got a hot spot and burned through
      VERY SIMPLE. Two screws inside the overn hold the element in place, remove them - pull the element forwad to expose the connections, one on each end. Simply unplug the element from the connections to remove the old one, plug the new element into the connections, push the element back into place, and re connect the two screw's that hold it in place. That's it. 5 minutes tops. You guys were great as far as getting the part, quickly and easily. Thanks!
      • Mark from Conway, AR
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP74003020
      11 of 12 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Bake element melted
      unscrewed back plate (one screw each side) pulled gently to expose connections. NOTE: BIG MISTAKE - forgot to shut off power!!!! I blew the clock which now needs to be replaced (in process). Back to the element though - connections very easy. One side had to be pulled from behind (used needle nose plyers to pull through opening). Connected element both sides gently pushed back in to position and replaced screws. I'll let you know how the clock replacement goes!
      • Julie from Boerne, TN
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        Y706037, WP74003020
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The bake element broke in two pieces
      removed the 2 screws connecting the element to the back wall of the oven. then slid the element towards me about 3 inches, and that exposed the wires ,which were terminated on to the element. I pulled the wires off the element, and removed it. I placed the new element in the oven,terminated the wires by pushing the connectors on to the element, slid the element towards the back of the oven , pushing the wire connections into the rear wall, until the attached flange ,on the element rested against the wall. I then terminated the screws to hold the element in place. Turned on the oven and made some biscuits. All went well
      • James from Harpers Ferry, WV
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP74003020
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The old element snapped, crackled and popped after years of relentless use-and-abuse.
      Here's the way to do it, according to the "Describe how you did the repair" prompt: "First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires..."

      Right, however, I shoulda-woulda-coulda listened to my fellow DYI'ers on this site about c-a-r-e-f-u-l-l-y feeding the wiring out of the rear hole.

      But, first, turn off the power. Secondly, make sure the power is off at the breaker. I did and that worked fine.

      However, as I pulled the connecting end of the bake element out, bummer! The spade electrical fitting popped off and retreated into a sea of insulation! Future solution? Like The Man suggested, Carefully, gently pull the element out and grab the connecting wire, pull it out to get a little slack and attach a clothespin to the end, so it won't back out and disappear! Then, detach the broken element, reverse the steps with the new bad boy and start cookin'!

      If you need to pull the stove out, as we did, to "get at" the back of the oven and the retreated wire, move the oven out on a parallel height platform or boards as it exits the opening. Note carefully as to how much slack there is on the electrical connection, typically armored cable or another, er, "homebrew" electrical solution.

      Take your time, as the pie will wait.
      • Christopher from San Fransisco, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WP74003020
      4 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven burner burnt out
      After removing the screws holding in the heating element and pulling out. I quickly realized I had a problem. The connectors on the wires and the connectors on the element were the same(female). So I had to ct the wire connectors off and put the correct type (male) connector on. If not for this the repair would have taken 5 minutes including time to pull stove away from wall and unplug and then plug back in and push to wall
      • Brian from North Manchester, IN
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP74003020
      2 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      element blew out while baking a cake didnt get no cake that night
      first i disconnected the power then removed the back cover then tested the element after removing the wires and found the element to be bad , did some research found parts select and happly found our part and ordered it .part came in removed back cover unhooked two wires took out two screws , removed and replaced , thank you parts select. every one needs to know about you.
      • Richard from Longmont, CO
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WP74003020
      2 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Bake element went kuput
      This is a very easy repair. But, make sure you first unplug the stove. Simply turning off the oven is not good enough. My wire connectors were reversed compared to the new element so I had to change the ones attached to the stove from female to male connectors. I bought 18 gauge male connectors, cut the old ones off and crimped on the new ones, attached the new element, pushed it back into place, put the two screws back in place and we were back in business.
      • Robert from Lakeport, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP74003020
      1 person found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Bake element caught on fire.
      I removed the 2 screws that hold the element in place. (located in the back of the oven). I then pulled the 2 wires about 3 inches & disconnected the 2 wires (1 red & 1 yellow).
      • Marsha from Pekin, IL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP74003020
      1 person found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      burned tube
      I removed the two screws that attach the element to the back of the oven. Then I pulled the element out a few inches and disconnected each of the wires attached to the element.
      These were easy to disconnect because they were quick-disconnect spade type connectors.
      Note the easiest part was the ordering and delivered the very next day WOW
      • Salvador R from Castaic, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP74003020
      1 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      5 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        5
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11744015
          Manufacturer Part Number: WP74003020
          Brand
          Model Number
          Description
          Magic Chef
          9875VRV
          Wall Oven - Built-in, Electric
          Magic Chef
          9875VVV
          Wall Oven - Built-in, Electric
          Magic Chef
          9875VYV
          Wall Oven - Built-in, Electric
          Magic Chef
          9875XRB
          Wall Oven - Built-in, Electric
          Magic Chef
          9875XVB
          Wall Oven - Built-in, Electric
          Magic Chef
          9875XYB
          Wall Oven - Built-in, Electric
          Magic Chef
          9876VVV
          Wall Oven - Electric
          Magic Chef
          9876XVB
          Wall Oven - Electric
          Magic Chef
          9895VRV
          Wall Oven - Built-in, Electric
          Magic Chef
          9895XRB
          Wall Oven - Built-in, Electric
          Admiral
          A9875VRV
          Wall Oven - Built-in, Electric
          Admiral
          A9875XRB
          Wall Oven - Built-in, Electric
          Admiral
          A9895VRV
          Microwave Oven Combo - Built-in, Electric
          Admiral
          A9895XRB
          Microwave Oven Combo - Built-in, Electric
          Magic Chef
          C9875VRV
          Wall Oven - Built-in, Electric
          Magic Chef
          C9875VVV
          Wall Oven - Built-in, Electric
          Magic Chef
          C9875XRB
          Wall Oven - Built-in, Electric
          Magic Chef
          C9875XVB
          Wall Oven - Built-in, Electric
          Maytag
          CWE9000BCB
          Wall Oven - Freestanding, Electric
          Maytag
          CWE9000BCE
          Wall Oven - Wall, Electric
          Maytag
          CWE9000BCM
          Wall Oven - Freestanding, Electric
          Maytag
          CWE9000BDB
          Wall Oven - Freestanding, Electric
          Maytag
          CWE9000BDE
          Wall Oven - Wall, Electric
          Maytag
          CWE9000CDB
          Wall Oven - Freestanding, Electric
          Maytag
          CWE9000CDE
          Wall Oven - Wall, Electric
          Maytag
          CWE9000DDB
          Wall Oven - Freestanding, Electric
          Maytag
          CWE9000DDE
          Wall Oven - Wall, Electric
          Maytag
          CWE9030BCB
          Wall Oven - Built-in, Electric
          Maytag
          CWE9030BCE
          Wall Oven - Built-in, Electric
          Maytag
          CWE9030BDB
          Wall Oven - Built-in, Electric

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service