11743903-1-M-Whirlpool-WP71003558-Motor Isolator
Part Location Diagram of WP71003558 Whirlpool Motor Isolator
See part 6 in the diagram
( Grid squares measure 1x1 inch )
11743903-1-S-Whirlpool-WP71003558-Motor Isolator 11743903-2-S-Whirlpool-WP71003558-Motor Isolator 11743903-3-S-Whirlpool-WP71003558-Motor Isolator Part Location Diagram of WP71003558 Whirlpool Motor Isolator
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Motor Isolator WP71003558

Rated by 5 customers 

A Bit Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 8.03
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11743903
Manufacturer Part Number WP71003558
Manufactured by Whirlpool
Product Description

Motor Isolator Specifications

This motor isolator is less than an inch long.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Cooktop, Range, Wall Oven.
This part works with the following products:
Jenn-Air, Kenmore, Maytag, Hoover.
Part# WP71003558 replaces these:
4381697, 5-70060, 570060, 7-8926, 708926, 71003558, 8038P002-60, Y708926
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.4 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Downdraft blower motor noise, fluctuating fan speed and binding. Also replaced indicator light for burner knob.
1. Turned off electrical breaker at electrical service panel.
2. Tested stove top to verify correct breaker was off as well as cook top.
3. Removed front electrical connection panel @ cook top.
4. Disconnected wires to blower fan. (Before disconnection I color coded wires for correct reconnection)
5. Removed the bracket holding the armored cable (protecting motor wires) and removed wires (where connects to electrical connection box).
6. Removed 4 nuts @ blower motor housing and removed blower motor housing and fan.
7. Removed 3 screws that attached the blower fan to the blower motor housing noting or marking the position of the housing to the motor bracket in order to have the same placement position.
8. Pulled the 3 connecting wires from the armored cable protector to separate housing from motor.
9. Removed the fan assembly from the blower motor shaft by using an allen wrench carefully noting the distance from motor face to the fan.
10. Noting/marking the position of the motor mounting bracket connections unscrew the nut and screw that secures the bracket to the motor.
11. Reassemble in reverse order.
Note:
I taped the motor wires tightly together every 3 or so inches to be able to slide through the armored cable.
I also had to rotate the mounting bracket a little to be able to perfectly match the motor housing to the motor bracket.

The new fan motor works great but it's a little bit louder.
Read less
Other Parts Used:
Motor Isolator Indicator Light Kit
  • John from FRESNO, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set, Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
blower motor was making loud noise
removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was horrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.
Read less
  • alphonso from plainfield, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Downdraft Motor Bearings Shot
I first had to purchase the replacement motor which was quoted from a high of $236 to a low at graingers of$100. 00. The counterman at graingers removed the blower fan from the motor for me with a special long handled allen key. I then degreased and cleaned the blower fan. I had to cut off the screws on the motor and replace the 3 motor isolators and the urethane foam around the motor. I had to thread the 3 wires from the new motor through the bx cable from the old motor and reattach the fan to the motor. Anyone wanting more detailed informatioin may contact me at:mablume@optonline. Net
Read less
Other Parts Used:
Motor Isolator Grease Filter Urethan Foam Gasket
  • MICHAEL from LAKE GROVE, NY
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blower motor died and I needed to replace it
Most of the repair was obvious as I took the blower apart before ordering the parts. Unfortunately the new motor was significantly larger than the original motor so I had to um. Adjust the position of some of the other parts to fit it in. There was a sheet metal flange that was installed on the other side of the blower from the motor which was designed to focus the air flow into the blower. I used a hammer to ajust the angle of flange so it no longer extended as far into the blower housing.

It works just fine although its a bit louder than the old motor was.
Read less
Other Parts Used:
Hose Clamp Motor Isolator Grease Filter Urethan Foam Gasket Blower Motor Kit
  • John from Berkley, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
377 of 384 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
high blower vibration
blower wheel was caked with dried grease clumps; replaced blower wheel, urethan foam and 3 motor isolators; blower/fan no longer vibrating cooktop.
Other Parts Used:
Exhaust Vent Blower Wheel Urethan Foam Gasket Motor Isolator
  • Lawrence from Chandler, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
9 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Screw
$9.55
$9.55
  In Stock
Blower Motor
$363.94
$363.94
  Special Order
BAND-MOTOR
$31.35
$31.35
  In Stock
Grease Filter
$38.84
$38.84
  In Stock
Exhaust Vent Blower Wheel
$87.04
$87.04
  On Order
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743903
Manufacturer Part Number: WP71003558
Brand
Model Number
Description
Jenn-Air
12103
Cooktop - Gas
Jenn-Air
12104
Cooktop - Electric
Kenmore
12301
Range - Kenmore Range/Stove/Oven Model 123.01 (12301, 123 01) Parts
Kenmore
12302
Range - Kenmore Range/Stove/Oven Model 12302(1988) Parts
Kenmore
20133
Range - Kenmore Range/Stove/Oven Model 20133(1988) Parts
Jenn-Air
20135
Range
Kenmore
20234
Range - Kenmore Range/Stove/Oven Model 20234(1988) Parts
Jenn-Air
20236
Range
Jenn-Air
20237
Range
Jenn-Air
20239
Range
Jenn-Air
22001
Cooktop - Electric
Jenn-Air
22112
Cooktop - Electric
Jenn-Air
22113
Cooktop - Electric
Jenn-Air
22116
Cooktop - Electric
Kenmore
22302
Range - Kenmore Range/Stove/Oven Model 22302(1988) Parts
Kenmore
22303
Range - Kenmore Range/Stove/Oven Model 22303(1988) Parts
Kenmore
22304
Range - Kenmore Range/Stove/Oven Model 22304(1988) Parts
Jenn-Air
22305
Cooktop - Electric
Kenmore
22306
Range - Kenmore Range/Stove/Oven Model 22306(1988) Parts
Kenmore
22307
Range - Kenmore Range/Stove/Oven Model 22307(1988) Parts
Kenmore
22308
Range - Kenmore Range/Stove/Oven Model 22308(1988) Parts
Kenmore
22309
Range - Kenmore Range/Stove/Oven Model 22309(1988) Parts
Kenmore
22310
Range - Kenmore Range/Stove/Oven Model 22310(1988) Parts
Jenn-Air
22401
Cooktop - Electric
Hoover
2300
Cooktop
Jenn-Air
2300ERS
Cooktop - Electric
Jenn-Air
2320ERS
Cooktop - Electric
Jenn-Air
2325ERS
Cooktop - Electric
Jenn-Air
2350EGS
Cooktop
Hoover
2360
Cooktop
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service
Motor Isolator
$ 8.03
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.