Maytag/Maytag_Thumb/50365.gif
See part 1 in the diagram
Replacing your Jenn-Air Range Bake Element - 240V play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Bake Element - 240V

★★★★★
★★★★★
8 Reviews

Rated by 27 customers 

Really Easy

15 - 30 mins

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your SVD48600B!
 Fits your SVD48600B!
PartSelect Number PS11743855
Manufacturer Part Number WP71001680
Manufactured by Whirlpool
Product Description

Bake Element - 240V Specifications

The element has male terminals. This bake element is found on the bottom of the oven.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly
This part works with the following products:
Range.
This part works with the following products:
Jenn-Air, Kenmore, Litton.
Part# WP71001680 replaces these:
AP6010671, 71001680
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Bess
    January 18, 2019
    Oven temp only goes to 250
    For model number SVE47100W
    Hi Bess, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If it checks out fine, you will need to check the electronic control board and the oven elements. I hope this helps. Thank you and have a great day!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Diana Smith
    August 23, 2019
    My oven won' t heat up to the right temperature. How do i knoe if it is the bake element or temperature probe that needs replaced?
    For model number SVE47100
    Hello Diana, thank you for inquiring. You can test the Long Oven Sensor, part number PS1570174 for your model, with a multi meter. It needs to read at 1080 ohms at room temperature to be working correctly. If the Long Oven Sensor tests okay, then you will want to replace the Bake Element, part number PS11743855 for your model. I hope this helps and good luck with your repair!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Bess
    January 29, 2019
    I was able to replace the heating element (ps11743855) but for some reason, the heating element is not working??? i connected the wires in the back to the new element the same as they were to the old element and for some reason it is not working?? please help!!
    For model number SV47100W
    Hi Bess, Thank you for your question. Test the element that you just purchased with a multimeter and see if it has continuity. If it is working fine, the issue maybe the wiring connected to it, the oven sensor or the electronic control board and you will need to check the parts to see which one is causing the issue. I hope this helps. Thank you and have a great day!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Jenn-Air Range Bake Element - 240V

      Replacing your Jenn-Air Range Bake Element - 240V play video
      Customer Repair Stories
       Average Repair Rating: 4.4 / 5.0, 27 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Replacing bake element as oven wouldn't heat
      After viewing the diagram on partselect.com, I knew this would be easy. I first shut off the circuit breaker to the oven, then used a phillips screwdriver to remove the two screws on the plate securing the element. Once removed, I disconnected the two wires, and removed the old element. I then connected the two wires to the new element, and screwed the plate back into place. I then switched the circuit breaker back on and tested the new bake element which was working perfectly. This do it yourself repair saved me time and money not having to call and schedule a repair man. Thank you so much partselect.
      • Catherine from Allenton, MI
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      47 of 51 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      No Display & Oven Wouldn't Heat
      First I removed the two screws that hold the bake element. I then pulled it out far enough to disconnect the two wires, and reversed the process to connect and secure the new element. I then removed the screws located under the control panel that held it in place. I removed the wiring, 3 cable connections, from the clock circuit board, and the two screws holding it in place. I installed the new circuit board, and reconnected the wiring, and returned the control panel to its place. The wife was upset that she had offered to do some of my chores while I fixed the oven when she found that it had only taken me 10 minutes to make the repairs. The parts were a perfect match, and the job couldn't have gone any smoother.
      Other Parts Used:
      Electronic Clock Control Board
      • CARROLL from ST. FRANCISVILLE, LA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver
      12 of 16 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Lower oven element burned out
      Stove is over 16 years old. I am getting new kitchen in the summer, did not want to buy another stove! I looked on line and found how easy it was to replace element. We turned off power as suggested and removed element to make sure it matched the one on line. I ordered element on Sunday afternoon and it arrived Tuesday afternoon, FedEx ground. Insert the clips and a couple screws and we were having oven fries for dinner. I could not be happier and pretty darn proud of myself for saving a couple hundred dollars on a repair man!
      • Crystal from Erie, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      7 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      oven would not heat to set temp
      I rremoved two screws and pulled element out about 3 inches. I un hooked the two wires and tested with an ohnm meter to determine the condition of the element. Element was bad so I ordered a new one. Service and price were great. Easy fix. Thank you.
      Don't forget to unplug first.
      • Wayne from Seward, AK
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      3 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Bake element wore out. Replaced Bake Element.
      Very easy. 1. Turn off power to oven. 2 move the adjustable grills out to gain better access. 3. There are two phillips head screws that hold a bracket to the back of the inside oven. Unscrew both screws. 4 pull the bake element out about 6". This exposes the two electrical connections. 5. Use a plier and wiggle the slide on connector off of the old bake element. 6. With your fingers, slip the old connectors onto the new bake element. 7. Slide the element and wires back in the insulated pocket. 8. Screw both screws back in. 9. Turn on power and make your wife back you chocolate chip cookies just to "test". Sit in an easy chair and enjoy your cookies. If this took longer than 30 minutes inclding baking the cookies, it took you too long. If the cookies are not good, replace the wife. May take a little loger though :)
      Other Parts Used:
      Light Bulb - 40W
      • Roy from Rocklin, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven wouldn't heat and hold temperature.
      I removed the screws that held the element in place. I then pulled the element out and disconnect the two wires. Connected the wires and place element in place and screws to hold in place.

      Note: this is the second part that I acquired to fix the problem. Had I listened to my wife the first time the problem would have been solved the first time around because she made the correct diagnosis.
      • Carl from Carlisle, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver, Socket set
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Bake element broke
      very easy, removed two screws, unplug the wires on the old element, replug the new element , replace the screws.

      Unfotunely this was not the entire problem. Ended up purchasing a new stove.
      • Betty from Hayward, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      My baking element went out.
      I only had to unscrew two screws to remove the existing element. Unfortunately, when I removed the element I found that the electrical wire connected to it had melted off, so the element is actually still good. I had to strip the wire back and put a new wire connector on. Once that was done I hooked the element back on and screwed it back together.
      • Susan from Standish, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Would Only Heat To 285 F After An Hour
      Simply unscrewed two screws holding the old element and replaced it with the new one. Note, of course I had to disconnect the wires that plugged into the back. Really easy and quick, less than $50 total for an that would cost over $2200 today.
      • Aaron from Plano, TX
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver, Screw drivers
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The bottom heating element of my Jenn Air cooking range stopped working.
      My husband did the repair. He had difficulty removing the old element, probably because it had been in there for 20 years. Once he got the old element out, it took less than 30 minutes to install the new one.
      • CAROLYN from PRIEST RIVER, ID
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Wrench set
      1 person found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      8 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        8
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11743855
          Manufacturer Part Number: WP71001680
          Brand
          Model Number
          Description
          Litton
          6294697
          Range
          Kenmore
          62946975
          Range
          Kenmore
          62946979
          Range
          Jenn-Air
          SCE30500B
          Range - Slide-in, Electric
          Jenn-Air
          SCE30500W
          Range - Slide-in, Electric
          Jenn-Air
          SCE30600B
          Range - Slide-in, Electric
          Jenn-Air
          SCE30600BC
          Range - Slide-in, Electric
          Jenn-Air
          SCE30600W
          Range - Slide-in, Electric
          Jenn-Air
          SCE30600WC
          Range - Slide-in, Electric
          Jenn-Air
          SCE70600B
          Range - Slide-in, Electric
          Jenn-Air
          SCE70600W
          Range - Slide-in, Electric
          Jenn-Air
          SVD48600B
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVD48600BC
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVD48600P
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVD48600PC
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVD48600PF
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVD48600PG
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVD48600PK
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVD48600PR
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVD48600PT
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVD48600PU
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVD48600W
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVD48600WC
          Range - Slide-in, Electric-Gas Combo
          Jenn-Air
          SVE47100B
          Range - Slide-in, Electric
          Jenn-Air
          SVE47100BC
          Range - Slide-in, Electric
          Jenn-Air
          SVE47100W
          Range - Slide-in, Electric
          Jenn-Air
          SVE47100WC
          Range - Slide-in, Electric
          Jenn-Air
          SVE47500B
          Range - Slide-in, Electric
          Jenn-Air
          SVE47500W
          Range - Slide-in, Electric
          Jenn-Air
          SVE47600B
          Range - Slide-in, Electric

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service