The element has male terminals. This bake element is found on the bottom of the oven.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Jenn-Air Range Bake Element - 240V
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly
This part works with the following products:
Range.
Part# WP71001680 replaces these:
AP6010671, 71001680
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
5.0
Filter By Rating:
5 Stars
8
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Cheryl B - November 17, 2021
Verified Purchase
Percent fit
It was simple to order, and it fit!!!
★★★★★
★★★★★
Shirley P - January 29, 2020
Verified Purchase
Oven element replacement
The part arrived quickly, in great condition, good instructions for replacement, easy-Peazy.
★★★★★
★★★★★
Vernon P - March 5, 2019
Verified Purchase
Easy repair,
I took the element out of the packaged and installed it within 5 minutes. Just make sure the power is off and remove two screws and disconnect the the wires and reassemble it. Good price and fast shipping would recommend them highly and also the element was shipped with very packaging.
Vern in beautiful Oregon.
★★★★★
★★★★★
Van S - January 3, 2019
Verified Purchase
Back to beautiful
The baking element came fast,and the installation went smoothly.Baked bread and pizza,we're back to normal around here.Thanks Parts elect.
★★★★★
★★★★★
Paul A - December 11, 2018
Verified Purchase
oven bake element, easy repair
part arrived the next day! exact fit, woks great
★★★★★
★★★★★
Linda K - December 4, 2018
Verified Purchase
Perfect part
The part came in appropriate time and was the correct item at a decent price! Oven works like new now!
★★★★★
★★★★★
Ellen V - May 30, 2018
Verified Purchase
Perfect fix!
The new bake element was just what my oven needed. It arrived in days, the connections were straight forward, but leaning into the back of the oven to see what I was doing was a challenge for the knees and back. I rewarded myself with fresh cookies!
★★★★★
★★★★★
Ed J - April 13, 2018
Verified Purchase
awsome ....very happy
correct part & works well
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 27 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The bottom heating element of my Jenn Air cooking range stopped working.
My husband did the repair. He had difficulty removing the old element, probably because it had been in there for 20 years. Once he got the old element out, it took less than 30 minutes to install the new one.
CAROLYN from PRIEST RIVER, ID
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven wouldn't heat up
Make sure you turn breaker off install both wires and screw the bracket into the back of the oven. You could use a phillips screw driver but with my ovens age seemed like it wanted to strip it out so I used a socket instead. Turn on the breaker and it works like new
Jim from HIGH SPRINGS, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out heating element
My father and I disconnected the electricity, took the old heating element out. This caused the most trouble as the old connections were impossible to loosen. But once we did, it was easy to get the new ones hooked on and the whole thing back together in less than an hour!
Cristina from Stewart Manor, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake function stopped working
Removed the bake element, checked with voltmeter for resistance which showed open circuit, ordered new element (which arrived in five days), installed. All of this can be done without moving the range, using access through oven door only. Connections to element are slip fits, removed and reinstalled with fingers.
Robert from Oakland, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat up past 285 degrees
Turned off the circuit breaker for the oven. Took the existing element out (really easy...a couple of screws is all) tested it with my volt meter and saw that it was bad. If you don't have a volt meter a local appliance repair shop may test it for you. Put the element back in so I could flip the breaker and use the stove top while wai
... Read moreting for the new element. New element came within three days. Flipped the breaker again, removed broken element and replaced it with new one. Flipped the breaker on and oven heated right up when preheated to 450 degrees :)
Read less
Tammy from Klamath Falls, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower oven element burned out
Stove is over 16 years old. I am getting new kitchen in the summer, did not want to buy another stove! I looked on line and found how easy it was to replace element. We turned off power as suggested and removed element to make sure it matched the one on line. I ordered element on Sunday afternoon and it arrived Tuesday afternoon, FedEx gr
... Read moreound. Insert the clips and a couple screws and we were having oven fries for dinner. I could not be happier and pretty darn proud of myself for saving a couple hundred dollars on a repair man!
Read less
Crystal from Erie, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element not heating
Turn off the power, unscrew the two screws holding the element. Without any tool, pull the wires off the connectors. and remove the bad element. Connect the new element. push into place, and screw it in. Maximum 15 minutes, and didn't get my hands dirty.
Clifford A from Melbourne Beach, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven bake element damaged and needed replacement
I went on line on Sunday. I identified the part needed ordered it on line and it was delivered on Tuesday at 7:30AM. Incredibly easy, fast and reasonably priced.
Wayne from East Moline, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven wouldn't heat
I turned off the breaker for the oven. Then I unscrewed the 2 screws holding the element in and pulled the element out. I unhooked the wires from the element and put the new element in. Reconected the wires, pushe it back into place and replaced the 2 screws. Turned the breaker back on and it works GREAT! Way easy!!! ...even for a gi
... Read morerl!
Read less
Marka from Tahuya, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat and hold temperature.
I removed the screws that held the element in place. I then pulled the element out and disconnect the two wires. Connected the wires and place element in place and screws to hold in place.
Note: this is the second part that I acquired to fix the problem. Had I listened to my wife the first time the problem would have been solve
... Read mored the first time around because she made the correct diagnosis.
Read less
Carl from Carlisle, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bess
January 18, 2019
Oven temp only goes to 250
For model number SVE47100W
Hi Bess,
Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If it checks out fine, you will need to check the electronic control board and the oven elements. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Diana Smith
August 23, 2019
My oven won' t heat up to the right temperature. How do i knoe if it is the bake element or temperature probe that needs replaced?
For model number SVE47100
Hello Diana, thank you for inquiring. You can test the Long Oven Sensor, part number PS1570174 for your model, with a multi meter. It needs to read at 1080 ohms at room temperature to be working correctly. If the Long Oven Sensor tests okay, then you will want to replace the Bake Element, part number PS11743855 for your model. I hope this helps and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bess
January 29, 2019
I was able to replace the heating element (ps11743855) but for some reason, the heating element is not working??? i connected the wires in the back to the new element the same as they were to the old element and for some reason it is not working??
please help!!
For model number SV47100W
Hi Bess,
Thank you for your question. Test the element that you just purchased with a multimeter and see if it has continuity. If it is working fine, the issue maybe the wiring connected to it, the oven sensor or the electronic control board and you will need to check the parts to see which one is causing the issue. I hope this helps. Thank you and have a great day!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"WP71001680","title":"WP71001680","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
