The leak limiter or natural gas limiter is used in dryers. This part acts as a cover of the adjustment screw on the pressure regulator. If you are changing from propane (LP) back to natural gas, it is best to replace this part. To convert your washer from LP to natural gas, remove the top of the dryer and screws to access the computer. When control panel is accessed, remove the wire harnesses in the front and the control panel itself. Next, remove the access panel and disconnect the wire that activates the moisture sensor. Remove the main front panel using a 1/4 inch nut driver and the belt from the pulley. Once you pull out the drummer you now have access to the gas valve. Refer to the diagram for further installation instructions. Remember to unplug your dryer from the power source for safety.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, Maytag, KitchenAid.
Part# WP694424 replaces these:
314602, 53-2615, 694424
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tony
December 11, 2018
I want to convert this dryer back to natural gas, it is propane right now, started as natural gas. What do i need for this conversion, i do not have the original orifice anymore.
For model number WGD7300XW0
Hello Tony, thank you for your question. To change the unit back to NAT gas you would want to order the following parts: Spring, Regulator Part Number: PS11743789, Screw, Regulator Adjustment Part Number: PS11743790, Leak, Limiter Part Number: PS11743791, and Orifice, Burner (Type 1) Part Number: PS11738696. Good luck with your repair!
Can you tell me what part numbers I will need to convert Maytag mgdb835dw3 dryer back to natural gas from lp
For model number MGDB835DW3
Hello Rick, thank you for your question. To change this back to Natural gas the gas valve would have to be ordered. That is PartSelect Number PS334359. Please enter the part number into the site for current price and availability. Good luck with your repair!
My dryer lights and runs for about a minute and then the burner turns off for a minute then lights again what would cause this.
For model number LGB6000PQ1
Hello Rick, Thank you for the question. This can be caused by Clogs In The Venting System. We suggest cleaning out the vent hose and cabinet from any lint build up. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Bill
September 22, 2022
I want to convert this gas dryer back FROM Propane TO Natural Gas.
Is there a kit or do I need to buy the Orifice and Limit cap separately?
For model number WGD9599TC0
Hi Bill,
Thank you for your question. The part number listed under your model number for the natural gas orifice is PS11738696. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
I'm converting back to natural gas from propane. I have orifice WP15418. What leak limiter do I need? I think WP694424 Do I need any other parts? thanks
For model number GGW9250PW2
Hi Karen,
Thank you for your question. The part number listed under your model number for the natural gas limiter is PS11743791. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Kursten
January 16, 2023
I want to convert this gas dryer back FROM Propane TO Natural Gas. What parts do I need? Thanks
For model number WGD49STBW2
Hi Kursten,
Thank you for your question. You will need the natural gas orifice and the natural gas limiter. The part number listed under your model number for the natural gas orifice is PS11740485. The part number listed for the limiter is PS11743791. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
