Spring, Regulator

Hello Gregg, thank you for your question. To convert this back, I believe you just need the NAT orifice, part number WP15418, and the leak limiter part number WP694424. The leak limiter or natural gas limiter is used in dryers. This part acts as a cover of the adjustment screw on the pressure regulator. If you are changing from propane (LP) back to natural gas, it is best to replace this part. To convert your washer from LP to natural gas, remove the top of the dryer and screws to access the computer. When control panel is accessed, remove the wire harnesses in the front and the control panel itself. Next, remove the access panel and disconnect the wire that activates the moisture sensor. Remove the main front panel using a 1/4 inch nut driver and the belt from the pulley. Once you pull out the drummer you now have access to the gas valve. Refer to the diagram for further installation instructions. Remember to unplug your dryer from the power source for safety.

Hello Mitchell, thank you for reaching out. If your dryer is making clicking sounds, we suggest that you check the following parts: thermal fuse, cycling thermostat, door catch kit, and igniter kit. If you require assistance to place an order, please contact customer service. We hope that helps!