Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ronald M - November 20, 2023
Verified Purchase
Repair part
Part came on time and easy installation and appliance back in order
★★★★★
★★★★★
Mel Q - October 12, 2023
Verified Purchase
Dryer Door Actuator Spring
The Dryer works now!
★★★★★
★★★★★
John K - May 4, 2023
Verified Purchase
Part worked good - easy to install.
Part worked good - easy to install. Dryer back to work now!
★★★★★
★★★★★
Kelly B - August 31, 2021
Verified Purchase
Easy repair
Part was as expected and received quickly in good condition. Can only hope it will last as long as the 29 year old original.
★★★★★
★★★★★
David P - August 6, 2021
Verified Purchase
Exactly right!
Perfect & fast. A 10 minute fix.
★★★★★
★★★★★
Robert B - July 1, 2021
Verified Purchase
Part was in great condition, easy repair and arrived in a timely manner.
Part was in new condition, easy to install with the video guidance supplied and arrived in a timely manner.
★★★★★
★★★★★
Susan C - June 1, 2021
Verified Purchase
Easy repair
The part fixed the dryer perfectly.
★★★★★
★★★★★
Frank C - April 6, 2021
Verified Purchase
Worked for me
I have an older dryer and it was nice to find the part I needed at an affordable prince.
★★★★★
★★★★★
Andrea L - March 14, 2021
Verified Purchase
Easy repair!
Other companies wanted to sell me a whole kit of parts costing fifty dollars, when all I needed was this small metal part that they sold me for seven dollars plus shipping. Thanks parts select!
★★★★★
★★★★★
Talya T - February 5, 2021
Verified Purchase
Easy repair
This was easy to install and I received part quickly
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 34 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Light stayed on, inside dryer. Dryer no workie
I diagnosed the problem, as a broken arm on the actuator for the door shut switch. I jumped the switch, and dryer worked. I went to this site, found the part I needed, ordered it/received it quickly, and proceeded to do the repair. The video that THIS particular part goes for, isn't' like MY dryer. My dryer hinges in the rear. You
... Read morejust remove the 2 screws on either side of the control panel, (right and left), pull forward on the panel, to ease its attachment, let it lie. Then with a small plastic pry tool, pop the 2 attaching points in the front of the dryer. Front end lifts up, like a hood on a car. My roommate held hood up, while I R&R'd the switch actuator. Went back together, in reverse of my taking apart. Worked great. Thanks a bunch.
Read less
Steven from New Richmond, WI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine would not start and light stayed on with door closed.
Turned off circuit breaker to machine. Removed lint trap to allow removal of two Philips screws from vent passage that hold lid on. Opened door and removed two Philips screws that hold switch to front of machine. Using flat blade #2 screw driver pushed on plastic locking tabs under front of machine top about 2" in from either side to allo
... Read morew top to be lifted up from machine. While holding up at 45 degree angle reached in and grabbed switch to pull it out for easy access. Set top down gently once switch was out. While holding switch removed broken switch actuator and installed new actuator on to switch. Lifted top back to 45 degree angle and with left hand held switch assembly in place and started two screws previously removed back into actuator holes. Tightened screws snugly. Lowered top back into plastic locking tabs and gently pushed down to secure top. Installed two screws back to air passage tube for lint trap through two holes in top that were removed at beginning of repair. Install lint trap, turn on circuit breaker and verified operation. Put wet clothes in tub, turned machine on, put away two screw drivers and kissed wife apologizing for taking so long to getting around to repairing machine.
Read less
Mark from TERREBONNE, OR
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer door actuator lever broke
I disconnected the dryer from the electric. I removed the lid to the dryer by first removing the lint door screws and prying the lid off properly. Disconnected the wires to the door switch. Removed the screws from inside the door and carefully removed teh actuator. Seperated the actuator from the switch and replaced the broken actuator. R
... Read moreeinstalled the actuator and switch and screwed the assembly back in place. Reconnected the wires, lowered the dryer lid and screwed the lint door screws back in place. It Worked perfectly.
Read less
Mark from Clarksburg, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer would not turn on
Found the switch part on the floor and after I figured out where it came from it was minutes before it took to find the web site and order the part, I then watched the installation video which helped with a few pointers and days later it was installed and fixed for 10 dollars with shipping,AMAZING!!!
Broken door actuator spring -interposer for motor control
Followed previous comments and took 5 minutes to replace. Be careful to hold spring and switch together because easy to separate and drop. Two screws to remove for switch, two to remove for lint trap, pop the lid up and switch / spring is easy to access.
Stephen from Vancouver, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door latch snapped off.
We got the part so fast we were both surprised. My husband installed the part by just seeing how the old one came off. It was simple and fairly quick. Except that his hands are so big they had a hard time fitting in to where the part needed to go. Just opened the top of the dryer, took the old part out and put the new one in.
Karen from Randle, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer would not run.
I first noticed that the tab of the door switch snapped off so the safety on/off switch did not work when the door was closed. I temporarily taped the switch closed so I could use the dryer. I found the model number from the unit and easily found the schematic and part description from the website. I placed the order and had the part in
... Read more a few days. Problem solved. Thank you
Read less
Kevin from North Aurora, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door switch lever/latch broke
You can buy the switch AND lever/latch, but partselect had lever by itself which is all I needed. Pay attention to orienation of lever around switch when you take old latch off and attach new. Also, be careful to not drop new lever behind/beneath clothes dryer drum. Took my wife and I a while to fish it out. I have replaced heating elemen
... Read moret, and other parts. At some point it will be time for a new dryer...
Read less
Ed from Charlottesville, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not start
The dryer just stopped after a new load of clothes was put in. It appeared to be a power problem as there were not warnings, it just stopped. After checking the power, I suspected it was an electrical interlock problem. After nosing around, I traced the power to the dryer door interlock. Sure enough the switch was fine, but the mechan
... Read moreical lever was worn away. After Googling around for a replacement I found PartSelect.Com. Found the part, ordered it, and I am back in business. My wife is not happy though, as she wanted a new dryer:)
Read less
Tim from Pepperell, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not come on
Replaced the cap over the door switch so when the door closed the switch was engaged
Steven from Bassett, VA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cheryl
November 7, 2017
How does this part attach to my Roper (Whirlpool) dryer. The video I was sent the dryer in the video isn't the type of dryer I have. The instructions I was sent does it apply to my dryer as well.
For model number REP3422AW0
Hi Cheryl, Thank you for the question. Here are some steps to install the actuator Switch. First unplugged appliance, next,removed lint filter and removed 2 screws from the lint filter chute.Open the top of appliance with a flat head screwdriver by applying pressure at each front corner and tilt up to access actuator switch on right side of door. Removed 2 screws from the actuator switch.Remove the actuator spring and then reverse the steps. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Thomas
October 15, 2017
Dryer shuts off during operation. Seems the door is loose.
For model number LG5801XMW0
Hi Thomas, Thank you for the question. If the door is lose you will need to check the hinges to see if they need to be tightened or replaced. You can also replace the Door Catch Kit, Part Number: PS334230.These two parts work together to keep your dryer door closed. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rossc
February 27, 2022
Need dryer door switch Kenmore
For model number 11086581100
Hello Rossc, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11723153. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
