Part Location Diagram of WP67005154 Whirlpool Dual Water Valve
See part 10 in the diagram
Replacing your Maytag Refrigerator Dual Water Valve
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Dual Water Valve WP67005154

 Fits your LSD2615HEB!
★★★★★
★★★★★
19 Reviews

Rated by 36 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 103.56
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your LSD2615HEB!
PartSelect Number PS11743618
Manufacturer Part Number WP67005154
Manufactured by Whirlpool
Product Description

Dual Water Valve Specifications

This part, when activated, releases water from the supply line into the ice mold. This water inlet valve is for refrigerators. Water inlet valve supplies water to the refrigerator ice maker and water dispenser. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Refrigerator Dual Water Valve

Replacing your Maytag Refrigerator Dual Water Valve
Troubleshooting
This part fixes the following symptoms:
Leaking | Not dispensing water | Ice maker not making ice | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Maytag, Amana, Jenn-Air, KitchenAid.
Part# WP67005154 replaces these:
AP6010439, 67003818, 67005154, 8208153, 8208275, WP67005154VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
19 Reviews
4.7
Filter By Rating:
  • 5 Stars
    15
  • 4 Stars
    2
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 36 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Bad water leak traced to this valve body
Self-explanatory, except that water pipes are removed from the valve body by pushing each fitting in towards the valve body, and simultaneously pulling on the pipe. 2 of the pipes came out easily, the 3rd was harder to get a good grip on. I ended up sawing through the plastic valve body to free the pipe and fitting, and improve my access angle. Installation of the new valve was a snap - I attached the valve to its support plate with a screw first.
  • Nigel from BERKELEY, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dispenser leaking
Unplugged refrigerator, shut off water supply to unit. Used a 1/4 inch but driver to remove screws holding water valve panel and hose clamps to back of unit. Gloves should be worn as sheet metal often has sharp edges. Note size and position of hoses to valve. A fine point permanent marker is good to mark the tubing. Push tubes into valve and retainer, hold retainer down while pulling hoses out. Remove old valve from panel. Attach new valve to panel. Insert hoses/tubes to valve. Make sure they press into marks made. Now is a good time to open water supply and check for leaks. Screw panel back on. Bleed air by dispensing water, about two gallons should clear lines and filter.
  • Lawrence from METAIRIE, LA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problem with installation
I replaced the part and everything worked great however after 3 days the water in the door quit working, ice machine working great.
  • David from COLUMBIA, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had two problems
one was the refrig wasn't holding temperature properly, sometimes too cold, sometimes too warm. Also the cold water dispenser didn't work at all. First, IMPORTANT! Check to see if there are different parts for your 'series' of model. I made the mistake of missing this and received the wrong parts the first time as Parts Select doesn't highlight this! It would be nice if their website checked to see if different parts are available for your model and ask if you checked this important fact. They were very good to replace the wrong part with the right one and refund the amount of the returned part. On my model, the first two digits of the serial number denotes the series number, which means you may need a 'series' specific model part. After getting the correct parts, replacing the damper control solved the temperature control issues and the refrige is actually quieter now (It used to make sounds as the damper opened or closed). My unit used a 'series 10' version and there was no need to purchase the harness, as I just used the old one. Replacing the dual water valve solved the issue with my water dispenser not working. I'm good with hand tools so both of these were easy for me using just basic tools.
Other Parts Used:
Damper Control Assembly Dual Water Valve
  • Rich from DERRY, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water was leaking at nozzle outlet
Very simple repair. The hardest part was getting the Refrigerator out of its cubby hole. Once that was done and all the lint vacuumed up the repair was as the video instructed. Saved several hundred dollars by doing the repair myself.
  • Perry from SPRING HILL, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker no longer functions
Looked up on I thought - popular mechanics website for how to repair. The valve is a dual function filter and pump. I used on ohm meter to check the pump after I removed the cover on the back and disconnected the electrical. Found no ohms. Pop. Mechanics recommended I replace the valve. Parts select was easy to order, and arrived quickly. After 1/2 hour, it works great. I realized the hard water we have in the burbs of Chicago plugged the filter. The pump struggled until it burned out. Thanks guys.
  • Ken from Oswego, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker pan flooded
The repair is easy all you have to do is follow the simple instructions posted by the other people and or watch the video by PartSelect. I want to thank PartSelect for being the best company that I have done business with ever. They have restored my faith in honest companies and their service is the best.
  • Danny from Alto, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back pressure was making internal water dispenser drip
While trying to fix this problem, I spent around $100.00 on a new ice maker (not the problem), $250.00 for a professional to try to fix the problem, and another $60.00 on the dual water valve (not the problem). At the end of the day the problem turned out to be the 10" water line coming into the freezer was freezing solid. I would previously use a hair drier to heat the line and remove a 4" cylinder of ice from the line which I thought was clearing it, but in reality the line needs to be pulled out of the back of the refrigerator so you can just rest it in a bowl of hot water to remove the ice. I spent a good amount of money on this job and have learned to fix everything myself moving forward. The install of the water valve was simple and required just pulling the lines out of the old valve and pushing them into the new valve. Be sure to have a bowl to allow the lines to drain into, and turn off the water supply to the fridge. By the way no amount of googling my problem yielded advice on pulling the water line out the back of the fridge to remove the ice : (
  • Eric from Wilmington, DE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water still works but not making ice
Easy DIY job! Pulled frig out, removed screws from lower left side where valve is...water hoses going in / out of pump are a push/pull design. UNPLUG THE FRIG FIRST! Grab the hoses and push it in while using a fingernail to pull up on the retaining clip, reinstall in reverse order..Ice maker started up immediately after I plugged it back in and turned the water back on :)
  • THOMAS from LEANDER, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water not going to fountain
Replaced the Dual water valve. its so easy, you ust neeed toi unplug the 3 water tubes, remove the metal panel that the Valve attaches to, repolace the valve, renstall the metal panel and reconnect the tubes. Part arrived in under 24hrs.
Other Parts Used:
Dispenser Sump Tray Dual Water Valve
  • Muhannad from calabasas, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

7 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kenneth
September 19, 2017
How does this part attach to my refrigerator and do I need a different plate for it to fit. And what would the cost of a new plate.
For model number MFC2061HEB
PartSelect logo
Hi Kenneth, Thank you for the question. You can reuse the plate you have with the new valve. First you need to remove the main water hose from the appliance, next remove black cover on the bottom of the fridge (about 5 screws) so you can disconnect the hoses going into the valve.Push in on the plastic fastener (blue & white) while you pulling on the hose. Do this for each of the hoses. Next disconnect the wires from the valve and unscrew the valve from the back plate. Replace with new valve which comes with brand new fasteners for the hoses and reverse the steps to install the new valve. Good luck with the repair !

12 people found this helpful.

Was this helpful?
Thank you for voting!
George
February 7, 2018
Water to ice maker does not shut completely off drip ing water freeze up freezer
For model number MSD2351HEB
PartSelect logo
Hello George, thank you for your question. If the water is still coming into the icemaker when it isn't supposed to I would recommend replacing the water vave, as it is not closing off completely, and allowing water to continue into the unit. I hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Greg
October 21, 2019
Replaced the water valve hoping it would fix the slow water dispenser and hollow ice cubes. Didn’t solve the problem. Any help would be appreciated.
For model number MZD2665HES
PartSelect logo
Hi Greg, Thank you for your question. If the water from your dispenser is dispensing slowly and you have hollow ice cubes, the issue is likely a clogged water filter and it will need to be replaced. If you have replaced the water filter and you still have hollow ice cubes and the water is dispensing slowly, you will need to flush the filter a couple of times to allow it work correctly. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
David
May 22, 2019
Hi. I’m getting just a trickle of water from my dispenser and no ice. I can hear the pump. How do i know if i need to replace the dual water inlet or the water filter head assembly? Thanks
For model number JFC2290VEM8
PartSelect logo
Hi David, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Ban
August 24, 2023
Hello, No water is making it into the ice maker. I changed the dual valve. Still no water going into the ice maker. Does the ice maker tell the dual valve to let water in?
For model number KBFA20ERSS
PartSelect logo
Hello Ban, thank you for your question. According to our research, at the beginning of the cycle, an electrical signal is sent to a water valve from icemaker to fill the ice mold with water. Firstly, you may need to check the clogging in water tubes. If this is not the issue, then you may need to replace the ice maker assembly, part number PS2121513, to fix the issue. We hope this helps, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Christine
July 29, 2021
My ice maker froze over and broke the white plastic piece that held the stop arm on. I ordered and replaced that piece. Then the ice maker wouldn't stop running water, so I replaced the water valve (which did register as defective when we tested it). Now it makes ice when I have things stored in the ice tray, but not when the tray is empty, whenever it feels like it, sometimes just one batch for days, sometimes many batches, and sometimes the water runs and freezes everything into a solid block of ice. And the stop bar won't stay in. At this point, I think I just need to order the entire ice maker. Thoughts?
For model number JFC2089HES
PartSelect logo
Hello Christine, Thank you for the question. This does sound like the Ice Maker could have been damaged as well and needs to be replaced. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Todd
January 13, 2022
I have installed a new icemaker unit and filter, but icemaker is not working. No water is making it into the icemaker. The water dispenser is working, and the door makes a clicking sound when I push the door switch. I suspect that it may be this dual inlet valve as the last filter was clogged and full of rusty water. The water is very hard here. I question the dual valve being the problem as the water dispenser is flowing good.
For model number LSD2615HEW
PartSelect logo
Hello Todd, thank you for your question. We have researched the model you have provided, and we would suggest the Dual Water Inlet Valve, part number PS11743618. It could just be that one side is clogged. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743618
Manufacturer Part Number: WP67005154
Brand
Model Number
Description
Kenmore
59655652500
Refrigerator
Kenmore
59655653500
Refrigerator
Kenmore
59655654500
Refrigerator
Kenmore
59655659500
Refrigerator
Kenmore
59655662500
Refrigerator
Kenmore
59655663500
Refrigerator
Kenmore
59655664500
Refrigerator
Kenmore
59655669500
Refrigerator
Kenmore
59657002600
Refrigerator
Kenmore
59657003600
Refrigerator
Kenmore
59657006600
Refrigerator
Kenmore
59657009600
Refrigerator
Kenmore
59675522400
Refrigerator
Kenmore
59675523400
Refrigerator
Kenmore
59675524400
Refrigerator
Kenmore
59675529400
Refrigerator
Kenmore
59675532400
Refrigerator
Kenmore
59675533400
Refrigerator
Kenmore
59675534400
Refrigerator
Kenmore
59675539400
Refrigerator
Kenmore
59676522500
Refrigerator
Kenmore
59676523500
Refrigerator
Kenmore
59676524500
Refrigerator
Kenmore
59676529500
Refrigerator
Kenmore
59676532500
Refrigerator
Kenmore
59676533500
Refrigerator
Kenmore
59676534500
Refrigerator
Kenmore
59676539500
Refrigerator
Amana
ABC2037DEB
Refrigerator - Bottom Freezer
Amana
ABC2037DEQ
Refrigerator - Bottom Freezer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service