Removed the top door hinge cover. Remover the four 12mm hex screws. Lifted empty door off bottem hinge support. Removed old door closure. Put some silicon lub on the new closure and installed. Reversed the removal steps.
But this did not fix the problem. Will have to remove the door and inspect the insi
... Read morede of the door's lower hinge assembly.
Read less
Bill from Murphy, NC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
16 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door bushing
I bought a set of appliances used online and the fridge door did not align to the other door. I quickly noticed I had lost the lower bushing to the right door upon transportation so I did what any man would do...find a way to fix it! after checking out a few websites I ran accross Partselect and after seeing their "dummy proof" diagrams I
... Read moret was certain I couldn't mess this up considering the loads of bushings to choose from. The order was placed Monday morning and to my surprise I had a package the VERY NEXT DAY!! AMAZING delivery time and quality products. PartSelect is definately my appliace parts source from now on! Thank you!
Read less
Carlos from Streamwood, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
8 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeannine
November 3, 2017
The left door (the one with the "flap"- don't know the technical name) won't close unless i firmly push it shut. It used to close on its own. I watched this partselect video and i wonder if this is the answer to the problem: Https://www.Youtube.Com/watch?V=fwchyaivsq8. Or do i need a different part? Thanks.
For model number KBFS25EVMS0
Hi Jeannine, Thank you for the question. When you open the door and just let go and the door sits still in the wide open position and not returning to the closed position,you should replace the Door Closure. If the door returns to the closed position but does not seal or latch closed you will need to replace the door Mullion Rail(flapper) Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
December 16, 2017
My wife kinda remembers vacuuming up a what i now think were the broken plastic flanges last year, and both doors now need forced closing and appear lower, so the mullion needs to be manually closed. The new door closers ( wp67003639) arrived but on visual inspection are the wrong color, i ordered replacements today, but importantly the closures seems very large for the allotted space (that i can see) on the door and hinge. Is there a shaft they will slip up into, it's not clear on the site explosion drawings. I don't want to take the doors off and have the wrong parts.
For model number GI5FSAXVY01
Hello Mark, Thank you for your inquiry. The door closers go up through the door stops part# WPW10191119 and into the bottom of the door, otherwise there is not a shaft they slip up into. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
October 2, 2019
Right fridge door clicks when opening and closing
For model number WRF532SNBM00
Hello Brian, thank you for writing. This may be due to either the Vertical Mullion Rail, part number PS11738596, or the Door Closure, part number PS11743548 for your model. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Georgianna
August 5, 2018
Fridge door can be pushed closed, but pops (or eases) open unless we tape it. Fridge door also pops open when we close freezer. Is this a gasket issue?
Hi Georginna,
Thank you for your question. Closing a refrigerator door can sometimes cause the other door to come open. The reason for this is that air is designed to flow from one section to the other and when you slam the refrigerator door for example, this will cause the air to go from one cavity to another. There are a few things that you can do to try to resolve this issue. Because the smaller door is more likely open, place heavier items in the freezer door shelves to prevent the door from opening when you close the refrigerator door. Also, make sure there is nothing in the freezer or refrigerator section that is preventing the doors from closing all the way. Check the door gaskets to see if they are clean and sealing properly. If they are not sealing correctly because they are dirty, you will need to clean them with a solution of baking soda and water. The solution should be 1 part baking soda to 3 parts water. Wash both the gaskets and the surfaces they close onto. On the hinge side of the gasket, lubricate it with paraffin wax. If your refrigerator has levelling legs, make sure they are levelled correctly. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Donald
July 25, 2019
Where is the open door alarm located and is there any easy way to silence it if it stays on when the refrigerator doors are closed. I'm assuming something has failed in the circuit board. Constant beeping is driving household crazy.
For model number JFC2089HES
Hello Donald, Thank you for the question. To stop the alarm noise, with the door open, press any key then close the door. If the alarm is activated again you may have an issue with the temperature inside the appliance and the appliance assumes it is due to an open door. Hope this helps!
Was this helpful?
Thank you for voting!
Bertha
June 27, 2019
Need part that fits inside top door closure to keep door from falling off
For model number ABB2227DEB
Hello Bertha, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738539. Hope this helps!
The right hand door will not close all the way.The door will stop about a inch from closing.The only way is to push it closed it will stay closed but not a good seal.The door fills like it wants to pull back open. The door before would close on its on with a normal push.Thanks.
For model number kbfs25evms00
Hi John, Thank you for the question. I suggest check the hinges first to make sure they are allowing the door to sit level. If the hinge is good you may need to replace the Closure. Hope this helps!
Was this helpful?
Thank you for voting!
Kenneth
November 23, 2019
The right side door does not stay open. It is level. It has been repaired before. I believe they just replaced a small plastic or nylon part at the bottom of the door. I would call it a detent . Sound familiar? Could I have the part or part number please.
For model number KRFF302ESS
Hi Kenneth, might be the door closer PS11743547 or door stop PS2008839. Thank you for your question and good luck with your repair!
The right fridge door doesn't close properly. If i close it without left door it bounces back to about an inch.If i close it with left door closed, it closes but not great, still open space at the top between seal and fridge cabinet. I leveled the fridge, took weight of the door, cleaned the seal. Any idea what it might be the problem? Thanks.
For model number Kenmore 596.79243016
Hello, Pajaand thank you for writing.
It certainly sounds like a faulty door closure pin PS11743548 you should check for signs of damage, and replace it if needed. You also should check your door gasket closely for damage. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Buzz
December 21, 2021
left hand door has a flap that needs some sort of closer at the top of the fridge frame. What is this part that will turn the flap on the left door to close?
For model number WRF535SMBM00
Hi Buzz,
Thank you for your question. Based on your description, it sounds like you need a hinge shim. The part number listed under your model number for the left-side hinge shim is PS2365536. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
