Crushed Ice Wheel WP67002052 | Official Whirlpool Part | Fast Shipping | PartSelect
Crushed Ice Wheel – Part Number: WP67002052
( Grid squares measure 1x1 inch )
Crushed Ice Wheel – Part Number: WP67002052 Crushed Ice Wheel – Part Number: WP67002052 Crushed Ice Wheel – Part Number: WP67002052 https://partselectcom.azureedge.net/Schematics/Maytag/21390.gif

Crushed Ice Wheel

PartSelect Number PS11743477

Manufacturer Part Number WP67002052

Manufactured by Whirlpool

Product Description

Crushed Ice Wheel Specifications

This crushed ice wheel is five inches in diameter. It is beige in color and is made of plastic.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Ice maker won’t dispense ice

This part works with the following products:

Refrigerator.

This part works with the following brands:

Amana, Maytag, Kenmore, Jenn-Air, Litton, KitchenAid, Whirlpool, Crosley, Gaggenau, Admiral, Magic Chef.

Part # WP67002052 replaces these:

10114702, 10114703, 4343895, 67002052.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 6 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fred from Olathe, KS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
WP67002052
Crushed Ice Wheel began to fragment
This is a side-by-side refrigerator. The crushed ice wheel is part of the icemaker bin auger, and it began to fragment, popping pieces of plastic into the ice dispenser and on into our drinks. The manuf. manual had nothing about parts in it, so GREAT thanks to Partselect for their website!!! Now, to dismantle the bin and auger is simple on this design: remove the bin from the freezer and allow it to defrost and dry; there are two small phillips-head screws on the front underside of the bin, holding the front panel in place - remove these screws and pop the front cover off; you'll then see two small phillips-head screws holding the auger-cap in place - remove these and pull the auger cap out, along with the auger; using a small pliers, remove the nut from the auger at the auger-cap, then slide the auger-cap off; at this point you just start removing washers, blades, etc, from the auger - MAKING SURE YOU KEEP THEM IN ORDER - until you reach the crushed ice wheel; separate the wheel from its metal brace, slide the wheel off and replace it; gradually replace all the other parts in order, cleaning them as you go, and simply put everything back together. It helps to keep the exploded parts diagram at hand - available on the Partselect website. It was a snap. The ordering process was simply and the part was delivered to my door on the second day after ordering.
25 of 28 people found this instruction helpful.
Was this instruction helpful to you?
rosemarie from duarte, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
WP67002052
ice wheel was broken
remove the bin from the freezer, there are 2 tabs on the lower front cover that pop off and you just pull the entire front cover off. there are 4 nuts that hold the blade cover which you can use the 7in1 with the insert removed.. i believe it's 5/16". remove the cover and the tumbler assembly pops out of the tray.
remove the nut with a set of pliers and lay it out on the table in order.
install is reverse of removal. make sure you get all the washers in the correct location when assembling. don't tighten the nut too tight or it will bind the rotating assembly.

enjoy retrieving ice from the door again!
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Andy from Somerset, KY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WPW10245167, WPA3073101, WP67002052, W10857122
Ice maker not making ice, also needed drumwheel for the front of the ice bucket, wouldn't crush ice , and ice would get stuck
Took the rear bottom panel loose , the ice maker and water dipenser valve is in the right corner. Turn off water line to the refrigerator , and also unplug the electric from the outlet. It is easier to take the ground wire loose from the valve bracket now , before taking valve out of the bracket. take the two water lines that run to the door and the ice maker loose, then remove the main inlet line. Once you have the water lines off, then you can remove both electrical plugs from the electric coils. The water lines that run to the door and the ice maker cant be confused , because they are two different sizes , so they will only fit the correct side. The electrical plugs are pretty simple as well as, the wires are the same color as the coils, so its fairly easy to see which one goes where. The replacement process is pretty self-explanitary , just reverse the order. Just as a hint of advice , have a sponge or mop ready to clean up the water that comes out of the lines when you remove them. I also changed the drum wheel in the front of the ice bin, this process is not easy if you let the blades and spacers fall apart , as they have to pretty much have to be in correct order , or your ice bin will not crush ice , and you could possibly bust the bin into pieces. The process is not really hard , just pay close attention to what is coming off from where!!! There are two bolt on the bottom of the front cover , take them loose and pull the cover forward from the bottom, then lift a little , should come off. Then the metal front cover should be exposed, ther are two bolts in it as well , remove them , and the front should be loose , this is when you hold the auger and keep an eye on the blades. There is also a nut , right in the center of the wheel you have to take loose , hold the auger then take the nut loose with a 1/2 in. wrench. Once you remove the nut the drum pulls right off the auger. When going back together , make sure the ice crusher blades all line up correctly , as the blades wont work at all . They have to slide back into the blade pivot bracket (slot made into the plastic bucket front). As I said before , be sure and pay close attention , and this process will go easily. The drum is marked front side , or this side out, be sure its installed correctly , as the ice will not feed right. The first cycle of the ice maker making ice will probably be only 1 or 2 cubes , but the second time around you will have a full set of 8 , the water lines get air in them while they are unhooked so you wont get a full cycle the first time.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Gregory from Lemon Grove, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
WP67002052
The wheel broke in half.
Remove ice tray from freeze. Removed all screws, replaced wheel. Reassembled unit.
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Bryan from Lancaster, SC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Parts Used:
WP67002052
Plastic wheel in icemaker broke
I removed the ice tray from the freeze. Turn over and remove screws holding the face plate on. Remove the 4 screws holding the crushing mechanism in place. Pull the entire mechanism out and remove the nut holding the blades together. Remember the alignment of the blades. Remove blades and then the pastic crush wheel. Replace in reverse order. Very easy.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
michael from pleasant grove, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP67002052
crushed ice wheel broken
very easy, with use of screwdriver and 1/4 in nut driver. just remember the way the blades go and get them back the same way. had it fixed in 15 mins.
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
3 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11743477
Manufacturer Part Number: WP67002052
Brand
Model Number
Description
Amana
1999A
Refrigerator
Amana
1999A-P1193906WL
Refrigerator - SIDE BY SIDE REFRIGERATOR
Amana
1999W
Refrigerator
Amana
1999W-P1193906WW
Refrigerator - SIDE BY SIDE REFRIGERATOR
Amana
2599A
Refrigerator
Amana
2599A-P1190419WL
Refrigerator - SIDE BY SIDE REFRIGERATOR
Amana
2599W
Refrigerator
Amana
2599W-P1190419WW
Refrigerator - SIDE BY SIDE REFRIGERATOR
Amana
2699A
Refrigerator
Amana
2699W
Refrigerator
Litton
35271
Refrigerator
Amana
35271-P1121805W
Refrigerator - REFRIGERATOR
Amana
35271W-P1121805WW
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
35278
Refrigerator
Amana
35278-P1121806W
Refrigerator - REFRIGERATOR
Amana
35278L-P1121806WL
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
35501
Refrigerator
Amana
35501-P1121711W
Refrigerator - REFRIGERATOR
Amana
35501W-P1121711WW
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
35508
Refrigerator
Amana
35508-P1121712W
Refrigerator - REFRIGERATOR
Amana
35508L-P1121712WL
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
35541
Refrigerator
Amana
35541-P1121709W
Refrigerator - REFRIGERATOR
Amana
35541W-P1121709WW
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
35548
Refrigerator
Amana
35548-P1121710W
Refrigerator - REFRIGERATOR
Amana
35548L-P1121710WL
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
36051
Refrigerator
Amana
36051-P1122003W
Refrigerator - REFRIGERATOR