Standard Y-Frame Range Surface Burner Specifications
The standard y-frame surface burner provides heat to your range. If you notice that your element will not heat, you may need to replace your surface burner. This product is 6 inches in diameter, and 1500W. The manufacturer suggests replacing the receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy, and you will not need any tools. To complete the repair, simply lift out the old burner and replace it with the new one. Check that the burners are turned off before you begin this repair.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
February 9, 2018
My small burners are working intermittently. Would the problem be with the burner or the switch? How would you suggest i diagnose the issue?
For model number FES310BL1
Hello Jim, thank you for your question. If the elements are turning on and heating in any capacity then the burners are probably working fine. I would recommend testing and replacing the switches. There are some testing instructions on our website at the following link: https://www.partselect.com/Range-Stove-Oven+Infinite-Switch-Testing+repair.htm
I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
April 2, 2018
For part number 660532 6" replacement heating element, what is the voltage, 110 or 220?
Hello Brian, thank you for your question. This part is a 240v 1500 watts unit. Good luck with your repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Horacio
December 12, 2019
I found the Whirlpool 6 inch burner element in your parts listing. I also need the 8 inch one. What is the part number for the 8 inch burner element?The part number for the 6 inch one is 9761347. thank you.
Hello Horacio, thank you for writing. We will need the model number for your appliance to determine the compatible replacement parts for it. We look forward to hearing back from you!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Gloria
January 23, 2020
Elements are getting too hot. As soon i turn on the stove the element is red hot immediately. Is that a problem i should be concern about?
For model number RF263LXTB3
Hello Gloria, thank you for your question. If the elements are not regulating properly, and getting too hot too quickly, the burner switch should be replaced. I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
VV
February 7, 2019
Will this replace a 1250 watt 240 volt
Hello VV, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bryan
March 10, 2020
Hi there, i'm looking for a 8 inch burner for my Whirlpool model #rf365pxmq0. I'm also looking for the drip pans below it (need 2 6in and 2 8in). Do you have these in stock?
For model number RF365PXMQ0
Hi Bryan, thank you for your question. Here are those parts for you: PS2366563, PS2366565, and PS11751367. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nora
June 30, 2021
I need an 8" burner element. Can I just buy one and do you carry this one? Thank you!
For model number RF261PXST
Hello Nora, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11751367. Please feel free to contact Customer Service at 1-888-738-4871 from 8:00 AM to 10:00 PM Eastern time, 7 days a week if you need help placing an order. We are looking forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Craig
December 28, 2022
Hello,
I'm looking for the replacement parts for my 3 turn and 4 turn heating element for my whirlpool range. Would you be able to provide the replacement parts number based on the range model number?
Also I've been told its a good idea to replace the receptacle for each burner that's replaced?
For model number WFC150M0EB1
Hi Craig,
Thank you for your question. The part number listed under your model number for the 6-inch burner element is PS11743366. The part number listed for the 8-inch burner element is PS11743367. The part number listed for the receptacle kit is PS389217. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
I am looking for replacement burners and drip pans for my stovetop but am unsure of which to get. My model number is MFC150M0EB1.
For model number WFC150M0EB1
Hello Becca, thank you for reaching out. The 6-inch drip bowl, part number PS2366565, the 8-inch drip bowl, part number PS2366563, the 6-inch burner, part number PS11743366, and the 8-inch burner, part number PS11743367, are compatible with your model. We hope this helps.
I need to replace the left rear 8 inch element in a Whirlpool range top pde8500a (vintage approx. 1975, i think). The circuit diagram identifies it as 2100w. Can't find that on your site. Any suggestions? The other 8 inch element is 2600w, which you appear to have, but the two 6 inch elements are 1500w, which i also cannot find. For now, i'm only desperate for the 2100w, but would like to find the others as well. Any suggestions?
For model number PDE8500A
Hello Ron, thank you for your question. I was able to find a model number RDE8500A1 in our system, which brings up a large element of Surface Burner - 8 Inch - 2600W PartSelect Number: PS11743367 and the small element of PartSelect Number: PS11743366. These are be the repalcement parts available at this time for that unit. The 2100W unit is not listed, but may have been replaced by the 2300. The manufacturer recommends replacing the receptacles at the same time. Those are part number PartSelect Number: PS340571. I hope this helps.
Uneven heating of surface burners. Occasional electrical sound (arching) when burner was turned on. Also the burner would heat up and cool down while burner when turned on.
Replaced all heating surface burners. We noticed signs of arching on the front left (large) burner so we replaced that receptacle with a replacement receptacle kit. Very quick and easy install (5-10 mins) using the short part select video on receptacle kit information page.
The burners were old and did not fit well on the stove
I just had to pull out the old burner and straighten the prongs for the new burner and insert, The prongs of the new burner were slightly bent in shipment, but were easy to straighten with the pliers. The burners were sent in a bag and not a box -- therefore the prongs were easily bent. I was very pleased that I (73 year old lady) was able to fix my stove without a repairman. Saved $$$
Plugged in the new burner, which we received in one day.We were delighted with the quick service
Barbara a from Huntington, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner element broke and drip bowls needed to be replaced.
I went to the local discount mart and bought drip bowls. The ones available at that store did not fit, so I decided to buy directly from the stove's manufacturer distributor.
The drip pans were simple to replace, as was the new burner element. My old one had broke and was still working, but I decided to replace it when I ordered the drip pans.
Everything was easy to install and it looks like a brand new new stove top! I saved a lot of money doing it myself.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
PATRICIA H - January 15, 2022
Verified Purchase
Easy repair
Part perfect
★★★★★
★★★★★
Peggy T - March 29, 2019
Verified Purchase
Worked as expected
Very simple replacement
★★★★★
★★★★★
Donna H - December 18, 2018
Verified Purchase
WP660532
Works great.
★★★★★
★★★★★
Fay T - October 10, 2018
Verified Purchase
Easy repair
Took much longer than expected but it works
★★★★★
★★★★★
Sheila C - October 10, 2018
Verified Purchase
easy fix
got the part this made an up grade to the stove
★★★★★
★★★★★
Kenneth T - September 2, 2018
Verified Purchase
Perfect replacement
Our old coils have been getting slightly warped, so pots and pans no longer sit firm and flat. We tried this one to replace the worst of them, and it is now just as flat and solid as when the range was brand new. We will now replace the other 3.
★★★★★
★★★★★
Carrie H - August 21, 2018
Verified Purchase
The repair was easy and smooth
The part came in as expected, thank you thank you I will order again from your company!!!
★★★★★
★★★★★
Adrian W - April 25, 2018
Verified Purchase
Easy repair
The part arrived expeditiously and served the purpose.
★★★★★
★★★★★
Karen G - April 21, 2018
Verified Purchase
Perfect replacement
The part was exactly what I wanted and came Very quickly. I'd definitely order from them again.
★★★★★
★★★★★
Lyle B - March 17, 2018
Verified Purchase
Matched the stove
Part fit as it should works great very glad I located your web site will buy from you again as needed
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
