Quick Question!

Have you ever purchased from PartSelect.com before?

11743312-1-S-Whirlpool-WP627843-Ejector Arm
11743312-1-S-Whirlpool-WP627843-Ejector Arm 11743312-2-S-Whirlpool-WP627843-Ejector Arm https://www.partselect.com/Schematics/Maytag/50671.gif

Ejector Arm

Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11743312
Manufacturer Part Number WP627843
Manufactured by Whirlpool

This is an ejector arm, and it is used in conjunction with your refrigerator. The function of this part is to act as a cube ejector inside your ice maker. The arm will rotate inside the ice maker to allow the ice cubes to fall out of the marker and into the ice bucket. This part is made entirely of plastic, is white in color, and has eight teeth. It measures just over 9 inches long, and one and a half inches wide. To make this installation the tools you will need include a quarter-inch nut driver, a flat-head screwdriver, and a Phillips screwdriver.

This part works with the following brands: Kenmore, Whirlpool, KitchenAid, Amana, Maytag, Admiral, Jenn-Air, Magic Chef, Crosley, Roper, Hoover, Estate, International, Litton, Norge, Inglis, Dacor, Hardwick, Gibson, Gaggenau, General Electric.

This part works with the following products: Refrigerator, Ice Maker, Freezer, Range.

This part fixes the following symptoms:

  • Ice maker not making ice.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent


The ejector arm came off and we cannot figure out how to install it back.

Kelly for model number kssc48qms02

Hi Kelly, Thank you for your question. You must first remove the ice bin and the shelf that is directly above the ice maker to give yourself room to maneuver inside of your freezer. Then, with a flat head screw driver, release the locking clip on your wire harness so that you can take your ice maker out of the freezer. You must remove the white ice maker cap. Then using your flat head screw driver, push out your electrical connection. After that you can remove your dispenser arm just by pulling it out of the slots it is in. Unscrew the control module. There are three screws that keep that on. After that, remove the black plastic housing as well. Gently remove your black plastic housing. Once you have gotten your ice maker apart, you can simply slide your injector back into position. After that, you just repeat these steps backwards to get your ice maker back into place. I hope this helps!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 1 reviews What's this?
1-1 of 1

14 of 43 people found this instruction helpful

Parts Used:
  • Ejector Arm
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mary L. from Millsboro,, DE

Ice maker ejector arm broke into.

Removed old ejector arm and installed new part.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11743312
Manufacturer Part Number: WP627843
Brand Model Number Description
Kenmore1061118553Ice Maker
Kenmore1061118555Ice Maker
Kenmore1062155184Ice Maker
Kenmore1064211173Ice Maker
Kenmore1064317943Ice Maker