Hose Clamp WP616099 | Official Whirlpool Part | Fast Shipping | PartSelect
Hose Clamp – Part Number: WP616099
Hose Clamp – Part Number: WP616099 Hose Clamp – Part Number: WP616099 https://partselectcom.azureedge.net/Schematics/Maytag/TEBJZIYW.gif

Hose Clamp

Product Description

Hose Clamp Specifications

Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original. The hose clamp is about 2 inches in diameter and made of stainless steel. A hose clamp generally attaches hoses and tubes to various equipment This part consists of a band and a screw that tightens along the slots when it is turned. This part works with washers, dishwashers, food waste disposers, and ice makers. This will need to be replaced if you notice leaking coming from the appliance.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Leaking

This part works with the following products:

Washer, Dishwasher, Washer Dryer Combo, Vacuum, Food Waste Disposer.

This part works with the following brands:

Kenmore, Whirlpool, Maytag, KitchenAid, Jenn-Air, Roper, Inglis, Magic Chef, Amana, Crosley, Estate, Admiral, Norge, International.

Part # WP616099 replaces these:

01500032, 01500145, 01500184, 113200087, 113200202, 113200404, 14219082, 16316, 200900, 204681, 22001376, 22002052, 22003627, 23001261, 23001262, 272859, 272860, 272861, 272865, 285188... Show More
Questions and Answers
Be the first to ask our experts a question about this part!
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 4 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Tina from Denver, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Socket set
Parts Used:
W11366249, WP696392, WP616099
A wirre from an underwire bra punctured a hole in tub to pump hose. Water leaked out all over the floor.
I searched the internet for parts because we had just had a repairman out to fix the knocking noise in the washer drum. He found an underwire from a bra there and removed it. That cost about $100.

My husband took apart the bottom panel and showed me what the part looked like and I was able to find it on your website. I was able to order the parts and have my husband repair the washer so I was only without a washer for a week and a half. Thank you.
40 of 79 people found this instruction helpful.
Was this instruction helpful to you?
Norman from Chappaqua, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
Parts Used:
WP616099, 912647, 910069
Leak in the hose that feeds the upper wash arm
First I disconnected the dishwasher electric, water supply and discharge hoses. I then pulled the dishwasher out. After opening the door, I removed the retainer clip holding the upper wash arm, then the nut holding the top shower hose in place. Close the door and lean the dishwasher on its side to get at the underside where the other end of the hose is. Loosen the hose clamp and remove the top shower hose. Reassemble everything in reverse order. In hindsight, I didn't need to buy the new hose clamp or the tub top washer (I reused the originals). Good luck!
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Roger from Palm Bay, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Parts Used:
WPY913158, WP616099, 912529
Leaking water from the discharge hose and pump gasket
1) Remove the lower dish rack.
2) Use towel to soak up any water in the dishwasher.
3) Remove the bottom plate on the dishwasher front.
4) Remove clamp from around the discharge hose. Some water will drain out so have towel handy.
5) Dishwasher will need to be pulled out from its built-in area in order to feed the old discharge hose out and the new one in. MAKE SURE THAT THERE IS ENOUGH PLAY IN THE ELECTRICAL WIRES AND THE INPUT WATER LINE TO THE DISHWASHER TO ALLOW IT TO BE PULLED OUT.
6) Loosen, all the way, the white plastic locking arm that clamps the pump housing. It clamps on a white corrugated plastic piece.
7) Remove the spindle arm inside the washer by unscrewing the "tower" piece.
8) Remove the screws from the pump housing on the inside of the washer.
9) Lift the pump housing carefully and remove the rubber gasket from around the housing. There is enough play to remove the gasket and put the new one on.
10) Clean the area around the housing so that the new gasket seats properly.
11) The new gasket will have to be installed before re-installing the discharge hose.
12) Re-install screws in pump housing.
13) Re-install the spindle arm.
14) Tighten the white plastic locking arm underneath the washer that locks down the pump housing.
15) The new discharge hose can now be reconnected between the sink drain and the dishwasher.
16) Dishwasher can now be put back into its place.
17) Before closing up the bottom plate of the dishwasher, it should be run and checked for leaks before finally closing up. My advice - let it stand overnight before checking for leaks. after running.
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Jay from Victoria, TX
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
WPY913158, WP910934, 902883, 902882, WP912510, WP616099
Unit had shaft seal leak.
After shutting off power and water to the unit, I disconnected the water supply line using a Crescent wrench and a pair of channellock pliers to support the solenoid.
I then disconnected the power at the junction box and the drain and circulate lines and clamps.
Then unlatched the retaining ring under the unit and lifted the pump assembly out.
Using the detail drawing from the web site I disassembled the pump assembly and laid out the parts in order of removal.
I then reassembled the pump assembly in reverse order replacing the worn parts with the new parts purchased from PartSelect.
I then reassembled the unit in reverse order checking for leaks as I went along.
The part worked great and my friend's dishwasher works beautifully.
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11743289
Manufacturer Part Number: WP616099
Brand
Model Number
Description
Kenmore
106.82872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
110.1050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
110.2071299
Washer - Kenmore Washing Machine Model 110.2071299 (1102071299, 110 2071299) Parts
Kenmore
110.2086299
Washer - Kenmore Washing Machine Model 110.2086299 (1102086299, 110 2086299) Parts
Kenmore
110.2087299
Washer - Kenmore Washing Machine Model 110.2087299 (1102087299, 110 2087299) Parts
Kenmore
110.2371220
Washer - Kenmore Washing Machine Model 110.2371220 (1102371220, 110 2371220) Parts
Kenmore
110.26902962
Washer - Kenmore Washing Machine Model 110.26902962 (11026902962, 110 26902962) Parts
Kenmore
110.2882790
Washer - Kenmore Washing Machine Model 110.2882790 (1102882790, 110 2882790) Parts
Kenmore
110.29802891
Washer - Kenmore Washing Machine Model 110.29802891 (11029802891, 110 29802891) Parts
Kenmore
110.4812791
Washer - Kenmore Washing Machine Model 110.4812791 (1104812791, 110 4812791) Parts
Kenmore
110.828918100
Washer - Kenmore Washing Machine Model 110.828918100 (110828918100, 110 828918100) Parts
Kenmore
110.828918110
Washer - Kenmore Washing Machine Model 110.828918110 (110828918110, 110 828918110) Parts
Kenmore
110.828918120
Washer - Kenmore Washing Machine Model 110.828918120 (110828918120, 110 828918120) Parts
Kenmore
110.828918130
Washer - Kenmore Washing Machine Model 110.828918130 (110828918130, 110 828918130) Parts
Kenmore
110.8293130
Washer - Kenmore Washing Machine Model 110.8293130 (1108293130, 110 8293130) Parts
Kenmore
110.92093320
Washer - Kenmore Washing Machine Model 110.92093320 (11092093320, 110 92093320) Parts
Kenmore
110.92093720
Washer - Kenmore Washing Machine Model 110.92093720 (11092093720, 110 92093720) Parts
Kenmore
110.98762790
Washer Dryer Combo - Kenmore Washer/Dryer Combo Model 110.98762790 (11098762790, 110 98762790) Parts
Kenmore
110.9975820
Washer Dryer Combo - Kenmore Washer/Dryer Combo Model 110.9975820 (1109975820, 110 9975820) Parts
Kenmore
110088732791
Washer Dryer Combo
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11013202200
Washer