The single outlet water valve may also be known as the water inlet valve and is compatible with your refrigerator. This valve has a quarter-inch tubing inlet connection. When energized, this part releases water from the supply line into the ice mold. The purpose of this part is to supply water to the water dispenser and the ice maker within the refrigerator. To make this installation you will need a quarter-inch nut driver and a sharp utility knife. To make this repair you will need to pull your appliance away from the wall and disconnect the electrical source and the water supply.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Refrigerator Single Outlet Water Valve
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Leaking
This part works with the following products:
Refrigerator, Ice Maker.
Part# WP61005273 replaces these:
AP6010047, 61001884, 61005273, 69364-1, 77181-1
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
5.0
Filter By Rating:
5 Stars
7
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Don S - August 18, 2022
Verified Purchase
Icemaker water valve replacement
The part that Parts Select sent me was identical to OE. Fit and functioned like new. Ice maker now back in service without leaks. Highly recommend Parts Select for accurate parts matching, diagnosis help, and quick delivery. - D.S.
★★★★★
★★★★★
Randy R - July 11, 2021
Verified Purchase
I’ve maker valve
Easy to install it’s working great
★★★★★
★★★★★
Martha G - June 25, 2019
Verified Purchase
Water Valve
The part came a day early and we watched the video on how to install it and our ice machine is working again.
★★★★★
★★★★★
Ed L - April 25, 2019
Verified Purchase
easy to install, fixed problem, works great!
This repair could not have been easier. The part was the exact fit. My icemaker now works great. Very satisfied.
★★★★★
★★★★★
Jan P - January 24, 2019
Verified Purchase
Easy as 123
Part came on time. Repair was real easy. Probably 10 mins.total. Will use Partselect again . ??
★★★★★
★★★★★
Richard S - August 22, 2018
Verified Purchase
Couldn't be Easier
After a little flood under the fridge, found the outlet water valve was leaking, but it was also 13 years old. Turned off the water and found the needle valve on my water line was no good and had to replace that as well. Replace the fridge for a $1500 or more or fix mine?? Found this part on PartSelect.com, waited a couple days for shipping, and my ice maker is back to working like new. Best part was only needing a screwdriver for the repair. My fridge is 13 years old, but looks and works like new, but nice to know PartSelect has every single nut & bolt, along with any misc part to keep it running well into the future.
★★★★★
★★★★★
Gerald D - April 24, 2018
Verified Purchase
Ice maker repair
Part arrived on time as promised and with the help of the video I was able to make the repair myself. I will definitely use PartSelect for any future parts and repairs
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 9 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice Maker Cycling But Not Making Ice
Adding water to Ice Maker, caused ice to be made. I assumed the Single Outlet Water Valve to be problem (despite %4 probability). I suppose problem could have been in the ice maker itself and it's interface to the Single Outlet Water Valve but fortunately the Single Outlet Water Valve solved the problem. The Parts Select replacement par
... Read moret video was very helpful and the replacement was fairly easy. Were the problem in the Ice Maker itself, I don't know that I could have justified the cost of the the repair for a 17 year old refrigerator.
Read less
Todd from STATE COLLEGE, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker water valve leaking, replace same
Watched the video, big help.
Marlin from WILLIAMSPORT, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My ice maker went out, I decided to replace the single outlet water valve as well.
removed the cover from the back of the refrigerator, and used the nutdriver to loosen screw on the single outlet water valve, removed the old water valve and the hoses to it. Connected the hoses to the new valve and attached to the wall of the refrigerator by tightening the screw. Then removed the old ice maker from the inside of the refr
... Read moreigerator, by loosening the two screws and attached the new one, I tightened the screws and then I was done. It is working great.
Ordered new part by the numbers and pics. and installation was so easy. I thank you very much
Weldon from Brady, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench set
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water spilling from the ice maker
The whole job went smoothly,just the way others have described it. Unfortunatlly the water valve was not the problem. The problem was that ice had formed where the water enter's the tray . and therefore could not get into the ice forming area and just spilled into the refrigerator. I removed the ice maker(2 screws and cable connector.) le
... Read moret the ice melt and reconnected all is well again.
Read less
Warren from Phoenix, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
5 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water over flowed in to ice ben
used 1/4 inch wrench to remove bottom screw and loosend tip screw and removed valve wires and water line
charles from fairfield, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench set
4 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Single Outlet Water Valve would'nt shut off completely.
Start: UNPLUG THE REFRIGERATOR FROM POWER! Then -
1. Shut off water supply to ice maker.
2. Remove panel from back of refrigerator to expose single outlet water valve.
3. Disconnect water supply line from single outlet water valve.
4. Remove single outlet water valve from refrigerator (one
... Read more screw).
5. Disconnect water line from the ice maker side of the single outlet water valve.
6. Reconnect the water line from the icemaker side of the old valve to the new single outlet water valve.
7. Re-attach the new single outlet water valve (with water line leading to the ice maker attached) to the refrigerator.
8. Reconnect the water supply line to the single outlet water valve.
9. Turn on the water and check for leaks.
10. Replace panel covering single outlet water valve at back of refrigerator.
Finish: PLUG THE REFRIGERATOR BACK INTO POWER.
Read less
Harold from Oakton, VA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Wrench set
14 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking around the valve
removed card board protection.4 screws. Unpluged refrigerator unscrewed the screw holding the valve but not all the way. disconnected the electric connection. removed the water connection after disconnecting the main water valve. replaced valve by reconnecting everything. Turned on water to check for leaks. Easy fix and recieved the part
... Read more sooner then expected. Will highly recomend your fast service and correct part replacement. web site was easy to use. THANK YOU
Read less
Russell from Westerville, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
12 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Valve broke and was leaking
1. Unplugged fridge. 2. Unplugged wire harness from valve. 3. Disconnected water supply from valve. 4. Removed valve from fridge chassis 5. Removed plastic tube from valve (supplies ice maker). 6. Removed old fitting from plastic tube and attached to new valve. 7. Attached new valve to fridge (only need 1 scr
... Read moreew) 8. Attached water supply to valve 9. Reattached wiring harness 10. Turned on water supply, checked for leaks 11. Powered on fridge. 12. Enjoy working ice maker.
Read less
Chad from Gainesville, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
64 of 73 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Denise
August 15, 2017
What kind of water filter do you use for this model and where does it go?
For model number MTB1956BEW
Hi Denise,
Thank you for your inquiry. According to your model information, although you have an optional ice maker kit, it looks like there was no filter added. You might have to consider using an in line filter on your appliance. I hope that helps. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Wayne
August 1, 2018
I have a leak top right corner back of fridge where water supply line goes into ice maker it's not the plastic tube but the white thing the tube goes into is there a washer or something behind that white piece that needs to be replaced. Watched the video for valve replacement but that was at the bottom mine is at the top
For model number mtf2193arq
Hi Wayne,
Thank you for your question. The piece you are referring to sounds like it is the water fill cup and bearing, part number PS11743318. This refrigerator ice maker fill cup dispenses the water into the ice cube mold during the fill cycle. Replacing the water fill cup is a possible solution if you notice that the ice maker is leaking, or not making/dispensing ice. If you notice the fill cup has been damaged or cracked; replace the part straight away. If this is not the correct part, please let us know. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Artie
January 13, 2020
Water not getting to the ice maker
For model number Atb2135hrw
Hello Artie and thank you for writing.
It certainly sounds like it could be a faulty water inlet valve PS11743223, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Stephen
December 7, 2022
My ice maker over flows with water when i dispenses the water. Is this the right part?
For model number MTB1956BEA
Hello Stephen, thank you for contacting us. Yes, the most probable cause of the issue is a faulty water inlet valve, part number PS11743223. You can test it with a multimeter to confirm the fault. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
